Slot-rectangular spouted beds, with rectangular cross-section and slotted gas inlets, have been proposed as a solution to overcoming scale-up difficulties with conventional axisymmetric spouted beds. They can be utilized in gas/particle processes such as drying of coarse particles and coating of tablets. However, application of this spouted bed was limited because of instability and insufficient hydrodynamic studies. The present work is therefore aimed at the study of hydrodynamics, stability and scale-up of slot-rectangular spouted beds. The hydrodynamic study was carried out in four slot-rectangular columns of various width-to-thickness ratios combined with various slot configurations, particles of different properties and a range of operating conditions. Hydrodynamics of slot-rectangular spouted beds showed major similarity with conventional spouted beds. However, equations and mechanistic models adopted from conventional axisymmetric spouted beds generally failed to provide good predictions for the three-dimensional slot-rectangular geometry. New empirical correlations were derived for the minimum spouting velocity and maximum pressure drop for different slot configurations. Slot-rectangular spouted beds also showed more flow regimes than conventional spouted beds. Nine flow regimes, as well as unstable conditions, were identified based on frequency and statistical analysis of pressure fluctuations. Slot geometrical configuration was found to be the main factor affecting the stability of slot-rectangular spouted beds. A comprehensive hydrodynamic study on the effect of slot configuration was therefore carried out. Slots of smaller length-to-width ratio, smaller length and greater depth were found to provide greater stability. Stable criteria for the slot configuration were found consistent with the conventional axisymmetric spouted beds with extra limitation on slot length-to-width ratio and slot depth. Local distributions of pressure, particle velocity and voidage, as well as spout shape and particle circulating flux, were compared for different slot configurations. Higher slot length-to-width ratios lead to slightly higher particle circulation rates. A previously proposed scale-up method involving multiple chambers was tested in the present work using multiple slots. Instability caused by the merging of multiple spouts and asymmetric flow was successfully prevented by suspending vertical partitions between the fountains. Some criteria and guidelines were also proposed for scale-up using multiple chambers.

Slot-rectangular spouted beds, with rectangular cross-section and slotted gas inlets, have been proposed as a solution to overcoming scale-up difficulties with conventional axisymmetric spouted beds. They can be utilized in gas/particle processes such as drying of coarse particles and coating of tablets. However, application of this spouted bed was limited because of instability and insufficient hydrodynamic studies. The present work is therefore aimed at the study of hydrodynamics, stability and scale-up of slot-rectangular spouted beds. The hydrodynamic study was carried out in four slot-rectangular columns of various width-to-thickness ratios combined with various slot configurations, particles of different properties and a range of operating conditions. Hydrodynamics of slot-rectangular spouted beds showed major similarity with conventional spouted beds. However, equations and mechanistic models adopted from conventional axisymmetric spouted beds generally failed to provide good predictions for the three-dimensional slot-rectangular geometry. New empirical correlations were derived for the minimum spouting velocity and maximum pressure drop for different slot configurations. Slot-rectangular spouted beds also showed more flow regimes than conventional spouted beds. Nine flow regimes, as well as unstable conditions, were identified based on frequency and statistical analysis of pressure fluctuations. Slot geometrical configuration was found to be the main factor affecting the stability of slot-rectangular spouted beds. A comprehensive hydrodynamic study on the effect of slot configuration was therefore carried out. Slots of smaller length-to-width ratio, smaller length and greater depth were found to provide greater stability. Stable criteria for the slot configuration were found consistent with the conventional axisymmetric spouted beds with extra limitation on slot length-to-width ratio and slot depth. Local distributions of pressure, particle velocity and voidage, as well as spout shape and particle circulating flux, were compared for different slot configurations. Higher slot length-to-width ratios lead to slightly higher particle circulation rates. A previously proposed scale-up method involving multiple chambers was tested in the present work using multiple slots. Instability caused by the merging of multiple spouts and asymmetric flow was successfully prevented by suspending vertical partitions between the fountains. Some criteria and guidelines were also proposed for scale-up using multiple chambers.

Slot-rectangular spouted beds, with rectangular cross-section and slotted gas inlets, have been proposed as a solution to overcoming scale-up difficulties with conventional axisymmetric spouted beds. They can be utilized in gas/particle processes such as drying of coarse particles and coating of tablets. However, application of this spouted bed was limited because of instability and insufficient hydrodynamic studies. The present work is therefore aimed at the study of hydrodynamics, stability and scale-up of slot-rectangular spouted beds. The hydrodynamic study was carried out in four slot-rectangular columns of various width-to-thickness ratios combined with various slot configurations, particles of different properties and a range of operating conditions. Hydrodynamics of slot-rectangular spouted beds showed major similarity with conventional spouted beds. However, equations and mechanistic models adopted from conventional axisymmetric spouted beds generally failed to provide good predictions for the three-dimensional slot-rectangular geometry. New empirical correlations were derived for the minimum spouting velocity and maximum pressure drop for different slot configurations. Slot-rectangular spouted beds also showed more flow regimes than conventional spouted beds. Nine flow regimes, as well as unstable conditions, were identified based on frequency and statistical analysis of pressure fluctuations. Slot geometrical configuration was found to be the main factor affecting the stability of slot-rectangular spouted beds. A comprehensive hydrodynamic study on the effect of slot configuration was therefore carried out. Slots of smaller length-to-width ratio, smaller length and greater depth were found to provide greater stability. Stable criteria for the slot configuration were found consistent with the conventional axisymmetric spouted beds with extra limitation on slot length-to-width ratio and slot depth. Local distributions of pressure, particle velocity and voidage, as well as spout shape and particle circulating flux, were compared for different slot configurations. Higher slot length-to-width ratios lead to slightly higher particle circulation rates. A previously proposed scale-up method involving multiple chambers was tested in the present work using multiple slots. Instability caused by the merging of multiple spouts and asymmetric flow was successfully prevented by suspending vertical partitions between the fountains. Some criteria and guidelines were also proposed for scale-up using multiple chambers. / Applied Science, Faculty of / Chemical and Biological Engineering, Department of / Graduate

Important global hydrodynamic relationships for shallow spouted beds of high-density particles were characterized in terms of three features: minimum spouting velocity, overall bed pressure drop at minimum spouting velocity; and fountain height. Spouted bed literature is sparse for shallow beds (static particle depth to bed diameter ≤ 1) and beds with heavy particles (density > 3000 kg/m3). Correlations for such beds were developed here by varying column diameter, static bed height, particle diameter, particle density, gas density and gas flow in an ambient temperature and pressure bed. The degree of correlation between each of the observed hydrodynamic features and a set of selected dimensionless groups from the literature was evaluated with principal components analysis. The minimum spouting velocity correlated strongly with the ratios of particle to bed diameter, of particle to gas density, and of static bed height to particle diameter, and weakly with Archimedes number. Overall bed pressure drop at minimum spouting correlated strongly with Archimedes number, the ratio of static bed height to particle diameter and Froude number. Fountain height correlated strongly with the ratios of the superficial gas velocity to minimum spouting velocity, of static bed height to particle diameter and of the particle to the bed diameter. Principal component regression models were developed for minimum spouting velocity, bed pressure drop, and fountain height with respect to a selected set of dimensionless parameters. All models have regression coefficient values exceeding 85%. Predictions using models developed in this study were compared with correlations in the literature and found to give better results for the experimental conditions studied. Most likely the literature models were less accurate because they were extrapolated. Distinct bed pressure drop relationships with gas flow were observed for certain ranges of particle diameter and static bed height. In addition three dynamical spouting modes were observed, and named as regular, erratic and bimodal. A spouting regime map is proposed based on the spouting regimes defined in this investigation. The correspondence between bed pressure drop relationships and spouting regimes is still unclear.