The master thesis consists of a theoretical part and a practical part. In the theoretical part jet-grouting technology is described briefly. Mechanical properties of jet-grouted piles were characterized. Various estimation methods of ultimate pile bearing capacity are described in this thesis – analytical calculation of ultimate bearing capacity for bored piles and estimation of ultimate pile bearing capacity by analysis of load-displacement curve defined by CHIN (1970; 1972). Load transfer method for piles and hyperbolic load-transfer curve are introduced. As a part of the load-trasfer method analysis, a method of estimating ultimate pile shaft friction called beta method is defined. In the practical part were evaluated several static load tests of jet-grouted piles and were constructed their load-displacemnt curves. Then reverse analysis of the results from static load tests was performed using load-transfer method. Then ultimate pile bearing capacity was estimated using analytical calculation of pile bearing capacity for bored piles and using analysis of load-displacement curve with method by CHIN (1970; 1972). By evaluation of load transfer method and beta method ultimate shaft resistence for each pile was estimated. Results and load-displacement curves were compared.

The diploma thesis focuses on analysing the current Railway Infrastructure Administration methodology for designing the sleeper substructure concerning the construction's deformation resistance, its comparison with the multi-layered method, which is used in the road engineering and finite element method. It deals with various methodologies of determining the deformation resistance of the track substructure.

Since their inception, building materials are constantly improving. New ways to explore and improve the material's properties are constantly investigated (especially to improve the mechanical and deformation characteristics of the materials). This thesis is focused on identifying and comparing values of the modulus of elasticity of fine-grained composites. These features are compared with respect to water cement ratio, ageing and compressive strength of the investigated materials. Afterwards, the values of the modulus of elasticity are studied in the relation to the tested materials.