The diploma thesis elaborates on the proposal of a loadbearing steel structure of a shopping centre. Four-storey building has total lenght of 88 m, width 48 m and its base structural grid is 8 x 8 m. The total height of building is 25,4 m. First three floors above ground are designed with structural height of 5,6 m whilst the 4TH floor uses height of 4,0 m. Frame structure is formed by primary beams and castellated secondary beams. Above 4TH floor, the roof structure is designed in two alternative versions, both using solid purlins and truss girder. The 3D computer animation of the building is also part of thesis. The shopping centre that is subject of the final thesis is located in Brno area.

This master´s thesis deals with a complete renovation of a shop in Vyškov. A part of this thesis represents a technical report of the worksite facilities, technological standard, inspection and test plan, machine design, plan of safety and protection of environment, contract for work, budget and schedule.

This diploma thesis deals with construction-technological project of production and storage hall in Hradec Králové. The thesis deals with complex of the implementation of the construction and focuses in more detail on the implementation of both foundation structures and assembly of the steel frame. The project includes a technical report on the construction technology project, a study of the implementation of the main technological stages of the main building, design and assessment of construction routes, construction equipment project, financial and construction schedule, machine design, schedule and budget of the main building, control and test plan for foundation structures, and occupational safety and health.

The objective of this Master´s thesis is to create and examine two versions of the project for a bearing steel structure of a multi-purpose sports building) in Polička. The multi-purpose sports hall has dimensions 33 x 48 metres with a terraced floory part that has dimensions 18 x 24 metres. The hall is made of cross-links from lattice truss placed on fixed columns. The structure ridgidity is by wind braces. The storey part is made coupled steel-conrete slabs attached to the columns. The ridgidity of the storey part is provided by lattice braces in traverse and longitudinal direction. The thesis in its detail focuses on individual parts of the construction and is carried out in compliance with the Eurocodes

Master thesis is focused on design of steel roofing structure of sports hall. Construction is located in town of Jihlava. Proportions and disposition are in accordance of assignment of master thesis. The proportions are 40m x 60m, the height of structure is approximately 15m. Two versions of roof structure were designed – truss beam with shape of lentil and double reverse truss girders (girland truss). These versions were tentatively analyzed and designed for the main bearing members. Afterwards both of the versions were appraised and one of the versions was chosen for detailed treatment. It means there was attention focused on design of important details, creating of drawing documentation and technical report, all in the range of thesis supervisor. The valid Eurocodes were used.

The subject of the diploma thesis is design and examination of supporting steel structure of the exhibition pavilion situated at the Brno Exhibition Centre, including a comparison with the second variant. The design emphasis has been placed on keeping the architectural character of building related to its purpose. The structure consists of 11 sections shaped as elliptical arcs, formed by truss frames with variable length of semi-axes, while the largest size (the smallest) is 13 m (7 m) for minor semi-axis and 20 m (14 m) for the main semi-axis, height is 16 m (10 m) and distance of support 38.92 m (25.30 meters). For the analysis of internal forces has been assembled spatial bar shaped model. Cladding is made of Kalzip system.

Sport Airport complex Brno-Medlánky is nestled in the undulating hilly terrain in fields just beyond populated areas in Brno-Medlánky. The history of the airport dates back to 1924 when it was built the first wooden hangar for training purposes glider flights. Current state urban of airport is orderless. The aim is to streamline the complex and give it the order, allowing easy and efficient orientation in the space. The main intervention was the creation of a new central building - Aviation Museum. The concept of the design is based on the division of the whole area into two branches - communication axes, based on the mass preserved historic wooden hangars. Between the two communication arms is inserted a central axis on which is located the heart of the complex - Aviation Museum. It is a building organic form, inspiring axially symmetric wingspan (bird, airplane, beetle). It is this symmetry axis of the building creates a view towards building on the runway. Mass of the building used by the sloping terrain and is partially sunk under the ground. Building volume follows an upward slope from the outside and blends with the surrounding terrain. The internal layout consists of three floors, one of them is completely sunk below ground level and second half. The main entrance to the gallery is located in the uppermost floors, the direction of the exhibition is therefore directed downwards into the basement. The exposition is divided into six parts: RC models exposure, gliders exposure, powered aircraft exposure, screening room, children's exposure and air trainers. Other areas consist of building technical facilities. In the basement there is a workshop with aircraft lift, with the possibility of placement unexposed aircrafts. The supporting system of the building consists of two parts: reinforced concrete tubs and arched steel structure with a span of 50m.

This Master thesis was about calculation and design of supporting steel bar structure multi storey administrative building. Steel structure with rotation symmetric floor plan has sixteen storey. Maximal size of building is 100x100m. Structural design report is made by a combination of manual calculations and calculations using software RFEM by Dlubal. Structural design report includes calculations of secondary beam, primary beam, column, bracing, purin, truss girder and others part of structure with their connections. Thesis includes drawing documentation and report.

The subject of the diploma thesis is to design a project study and a building program that would become a compromise between the requirements of the city of Brno and BUT in the area of Kraví hora in the Brno city center. The city of Brno would like to transform the area into a public park. But BUT considers it as its "family silver" because they realize its extraordinary value. Options of a constructions are really limited because of many area regulations. My proposal counts on the demolition of all existing buildings in the area, respects property area relations , protection zone, continuity with existing traffic roads, height regulation, imaginary raster of surrounding buildings, slope of terrain and orientation to the cardinal points. My suggest represents a study of five groups of objects which creating a rectangular raster. As a compromise solution, I chose the presentation and promotional areas of the individual faculties of BUT for the content of the buildings. Faculties have spaces for hobby groups for the public comprise all age groups included. I also designed the BUT Museum of History, a multimedia hall, a cafeteria, studios, a student leisure center and an observation tower with a climbing wall.

The subject of my diploma thesis is the technology of steel production hall and brick administrative building in the komplex of Kabeltechnik compalny in Mikulov. Thesis deals with design of construction site, construction and technological study of construction of steel manufacturing hall, items budget according to project documentation, financial and time planing, proposal of suitable mechanical assembly including lifting mechanisms, safety of work, environmental plan and monitoring and test planing.