No description available.

A Steiner triple system of order v, denoted STS(v), is said to be tricyclic if it admits an automorphism whose disjoint cyclic decomposition consists of three cycles. In this thesis we give necessary and sufficient conditions for the existence of a tricyclic STS(v) when one of the cycles is of length one. In this case, the STS(v) will contain a subsystem which admits an automorphism consisting of a fixed point and a single cycle. The subsystem is said to be 1-rotational.

An Euler tour of a hypergraph is a closed walk that traverses every edge exactly once; if a hypergraph admits such a walk, then it is called eulerian. Although this notion is one of the progenitors of graph theory --- dating back to the eighteenth century --- treatment of this subject has only begun on hypergraphs in the last decade. Other authors have produced results about rank-2 universal cycles and 1-overlap cycles, which are equivalent to our definition of Euler tours. In contrast, an Euler family is a collection of nontrivial closed walks that jointly traverse every edge of the hypergraph exactly once and cannot be concatenated simply. Since an Euler tour is an Euler family comprising a single walk, having an Euler family is a weaker attribute than being eulerian; we call a hypergraph quasi-eulerian if it admits an Euler family. Due to a result of Lovász, it can be much easier to determine that some classes of hypergraphs are quasi-eulerian, rather than eulerian; in this thesis, we present some techniques that allow us to make the leap from quasi-eulerian to eulerian. A triple system of order n and index λ (denoted TS(n,λ)) is a 3-uniform hypergraph in which every pair of vertices lies together in exactly λ edges. A Steiner triple system of order n is a TS(n,1). We first give a proof that every TS(n,λ) with λ ⩾ 2 is eulerian. Other authors have already shown that every such triple system is quasi-eulerian, so we modify an Euler family in order to show that an Euler tour must exist. We then give a proof that every Steiner triple system (barring the degenerate TS(3,1)) is eulerian. We achieve this by first constructing a near-Hamilton cycle out of some of the edges, then demonstrating that the hypergraph consisting of the remaining edges has a decomposition into closed walks in which each edge is traversed exactly once. In order to extend these results on triple systems, we define a type of hypergraph called an ℓ-covering k-hypergraph, a k-uniform hypergraph in which every ℓ-subset of the vertices lie together in at least one edge. We generalize the techniques used earlier on TS(n,λ) with λ ⩾ 2 and define interchanging cycles. Such cycles allow us to transform an Euler family into another Euler family, preferably of smaller cardinality. We first prove that all 2-covering 3-hypergraphs are eulerian by starting with an Euler family that has the minimum cardinality possible, then demonstrating that if there are two or more walks in the Euler family, then we can rework two or more of them into a single walk. We then use this result to prove by induction that, for k ⩾ 3, all (k-1)-covering k-hypergraphs are eulerian. We attempt to extend these results further to all ℓ-covering k-hypergraphs for ℓ ⩾ 2 and k ⩾ 3. Using the same induction technique as before, we only need to give a result for 2-covering k-hypergraphs. We are able to use Lovász's condition and some counting techniques to show that these are all quasi-eulerian. Finally, we give some constructive results on hypergraphs with small edge cuts. There has been analogous work by other authors on hypergraphs with small vertex cuts. We reduce the problem of finding an Euler tour in a hypergraph to finding an Euler tour in each of the connected components of the edge-deleted subhypergraph, then show how these individual Euler tours can be concatenated.

Consider distinct latin squares, L and M, of order n. Then the pair (T1, T2) where T1 = L \M and T2 = M \ L is called a latin bitrade. Furthermore T1 and T2 are referred to as latin trades, in which T2 is said to be a disjoint mate of T1 (and vice versa). Drápal (1991) showed that, under certain conditions, a partition of an equilateral triangle of side length n, where n is some integer, into smaller, integer length sided equilateral triangles gives rise to a latin trade within the latin square based on the addition table for the integers modulo n. A partial latin square P of order n is said to be completable if there exists a latin square L of order n such that P ⊆ L. If there is only one such possible latin square, L, of order n then P is said to be uniquely completable and P is called a defining set of L. Furthermore, if C is a uniquely completable partial latin square such that no proper subset of C is uniquely completable, C is said to be a critical set or a minimal defining set. These concepts, namely latin trades and defining sets in latin squares, are intimately connected by the following observation. If L is a latin square and D ⊆ L is a defining set, then D intersects all latin bitrades for which one mate is contained in L. In Part I of this thesis Dr´apal’s result is applied to investigate the structure of certain defining sets in latin squares. The results that are obtained are interesting in themselves; furthermore, the geometric approach to the problem yields additional appealing results. These geometric results are discussed in Chapters 3, 4, 5 and 6. They pertain to partitioning regions (polygons in R2 that satisfy certain obvious conditions) into equilateral, integer length sided, triangles, such that no point, in the region, is a corner of more than three distinct triangles. In Chapter 2 one of the main two theorems on defining sets is established, as is a method for using the above geometric results to prove the nonexistence of certain types of defining sets. In Part II of this thesis, intersection problems, for latin squares and Steiner triple systems, are considered. The seminal works, for problems of these types, are due to Lindner and Rosa (1975) and Fu (1980). A natural progression, from the established literature, for intersection problems between elements in a pair of latin squares or Steiner triple systems is to problems in which the intersection is composed of a number of disjoint configurations (isomorphic copies of some specified partial triple system). In this thesis solutions to two intersection problems for disjoint configurations are detailed. An m-flower, (F,F), is a partial triple system/configuration, such that: F = {{x, yi, zi} | {yi, zi} ∩ {yj , zj} = ∅, for 0 ≤ i, j ≤ m − 1, i 6= j}; and F = UX∈FX. The first such problem considered in this thesis asks for necessary and sufficient conditions for integers k and m ≥ 2 such that a pair of latin squares of order n exists that intersect precisely in k disjoint m-flowers. The necessary terminology, constructions, lemmas and proof for this result are contained in Chapters 7, 8 and 9. The second such problem considered in this thesis asks for necessary and sufficient conditions for integers k such that a pair of Steiner triple systems of order u exists that intersect precisely in k disjoint 2-flowers. This result relies on the solution to the latin square problem and an additional result from Chapter 9. The further constructions and lemmas used to prove this result are detailed in Chapter 10.

A linear space is a set of points and lines such that any pair of points lie on exactly one line together. This is equivalent to a pairwise balanced design PBD(v, K), where there are v points, lines are regarded as blocks, and K ⊆ Z≥2 denotes the set of allowed block sizes. The dimension of a linear space is the maximum integer d such that any set of d points is contained in a proper subspace. Specifically for K = {3, 4, 5}, we determine which values of v admit PBD(v,K) of dimension at least three for all but a short list of possible exceptions under 50. We also observe that dimension can be reduced via a substitution argument. / Graduate / 0405 / jniezen@uvic.ca

Consider distinct latin squares, L and M, of order n. Then the pair (T1, T2) where T1 = L \M and T2 = M \ L is called a latin bitrade. Furthermore T1 and T2 are referred to as latin trades, in which T2 is said to be a disjoint mate of T1 (and vice versa). Drápal (1991) showed that, under certain conditions, a partition of an equilateral triangle of side length n, where n is some integer, into smaller, integer length sided equilateral triangles gives rise to a latin trade within the latin square based on the addition table for the integers modulo n. A partial latin square P of order n is said to be completable if there exists a latin square L of order n such that P ⊆ L. If there is only one such possible latin square, L, of order n then P is said to be uniquely completable and P is called a defining set of L. Furthermore, if C is a uniquely completable partial latin square such that no proper subset of C is uniquely completable, C is said to be a critical set or a minimal defining set. These concepts, namely latin trades and defining sets in latin squares, are intimately connected by the following observation. If L is a latin square and D ⊆ L is a defining set, then D intersects all latin bitrades for which one mate is contained in L. In Part I of this thesis Dr´apal’s result is applied to investigate the structure of certain defining sets in latin squares. The results that are obtained are interesting in themselves; furthermore, the geometric approach to the problem yields additional appealing results. These geometric results are discussed in Chapters 3, 4, 5 and 6. They pertain to partitioning regions (polygons in R2 that satisfy certain obvious conditions) into equilateral, integer length sided, triangles, such that no point, in the region, is a corner of more than three distinct triangles. In Chapter 2 one of the main two theorems on defining sets is established, as is a method for using the above geometric results to prove the nonexistence of certain types of defining sets. In Part II of this thesis, intersection problems, for latin squares and Steiner triple systems, are considered. The seminal works, for problems of these types, are due to Lindner and Rosa (1975) and Fu (1980). A natural progression, from the established literature, for intersection problems between elements in a pair of latin squares or Steiner triple systems is to problems in which the intersection is composed of a number of disjoint configurations (isomorphic copies of some specified partial triple system). In this thesis solutions to two intersection problems for disjoint configurations are detailed. An m-flower, (F,F), is a partial triple system/configuration, such that: F = {{x, yi, zi} | {yi, zi} ∩ {yj , zj} = ∅, for 0 ≤ i, j ≤ m − 1, i 6= j}; and F = UX∈FX. The first such problem considered in this thesis asks for necessary and sufficient conditions for integers k and m ≥ 2 such that a pair of latin squares of order n exists that intersect precisely in k disjoint m-flowers. The necessary terminology, constructions, lemmas and proof for this result are contained in Chapters 7, 8 and 9. The second such problem considered in this thesis asks for necessary and sufficient conditions for integers k such that a pair of Steiner triple systems of order u exists that intersect precisely in k disjoint 2-flowers. This result relies on the solution to the latin square problem and an additional result from Chapter 9. The further constructions and lemmas used to prove this result are detailed in Chapter 10.

Consider distinct latin squares, L and M, of order n. Then the pair (T1, T2) where T1 = L \M and T2 = M \ L is called a latin bitrade. Furthermore T1 and T2 are referred to as latin trades, in which T2 is said to be a disjoint mate of T1 (and vice versa). Drápal (1991) showed that, under certain conditions, a partition of an equilateral triangle of side length n, where n is some integer, into smaller, integer length sided equilateral triangles gives rise to a latin trade within the latin square based on the addition table for the integers modulo n. A partial latin square P of order n is said to be completable if there exists a latin square L of order n such that P ⊆ L. If there is only one such possible latin square, L, of order n then P is said to be uniquely completable and P is called a defining set of L. Furthermore, if C is a uniquely completable partial latin square such that no proper subset of C is uniquely completable, C is said to be a critical set or a minimal defining set. These concepts, namely latin trades and defining sets in latin squares, are intimately connected by the following observation. If L is a latin square and D ⊆ L is a defining set, then D intersects all latin bitrades for which one mate is contained in L. In Part I of this thesis Dr´apal’s result is applied to investigate the structure of certain defining sets in latin squares. The results that are obtained are interesting in themselves; furthermore, the geometric approach to the problem yields additional appealing results. These geometric results are discussed in Chapters 3, 4, 5 and 6. They pertain to partitioning regions (polygons in R2 that satisfy certain obvious conditions) into equilateral, integer length sided, triangles, such that no point, in the region, is a corner of more than three distinct triangles. In Chapter 2 one of the main two theorems on defining sets is established, as is a method for using the above geometric results to prove the nonexistence of certain types of defining sets. In Part II of this thesis, intersection problems, for latin squares and Steiner triple systems, are considered. The seminal works, for problems of these types, are due to Lindner and Rosa (1975) and Fu (1980). A natural progression, from the established literature, for intersection problems between elements in a pair of latin squares or Steiner triple systems is to problems in which the intersection is composed of a number of disjoint configurations (isomorphic copies of some specified partial triple system). In this thesis solutions to two intersection problems for disjoint configurations are detailed. An m-flower, (F,F), is a partial triple system/configuration, such that: F = {{x, yi, zi} | {yi, zi} ∩ {yj , zj} = ∅, for 0 ≤ i, j ≤ m − 1, i 6= j}; and F = UX∈FX. The first such problem considered in this thesis asks for necessary and sufficient conditions for integers k and m ≥ 2 such that a pair of latin squares of order n exists that intersect precisely in k disjoint m-flowers. The necessary terminology, constructions, lemmas and proof for this result are contained in Chapters 7, 8 and 9. The second such problem considered in this thesis asks for necessary and sufficient conditions for integers k such that a pair of Steiner triple systems of order u exists that intersect precisely in k disjoint 2-flowers. This result relies on the solution to the latin square problem and an additional result from Chapter 9. The further constructions and lemmas used to prove this result are detailed in Chapter 10.

Consider distinct latin squares, L and M, of order n. Then the pair (T1, T2) where T1 = L \M and T2 = M \ L is called a latin bitrade. Furthermore T1 and T2 are referred to as latin trades, in which T2 is said to be a disjoint mate of T1 (and vice versa). Drápal (1991) showed that, under certain conditions, a partition of an equilateral triangle of side length n, where n is some integer, into smaller, integer length sided equilateral triangles gives rise to a latin trade within the latin square based on the addition table for the integers modulo n. A partial latin square P of order n is said to be completable if there exists a latin square L of order n such that P ⊆ L. If there is only one such possible latin square, L, of order n then P is said to be uniquely completable and P is called a defining set of L. Furthermore, if C is a uniquely completable partial latin square such that no proper subset of C is uniquely completable, C is said to be a critical set or a minimal defining set. These concepts, namely latin trades and defining sets in latin squares, are intimately connected by the following observation. If L is a latin square and D ⊆ L is a defining set, then D intersects all latin bitrades for which one mate is contained in L. In Part I of this thesis Dr´apal’s result is applied to investigate the structure of certain defining sets in latin squares. The results that are obtained are interesting in themselves; furthermore, the geometric approach to the problem yields additional appealing results. These geometric results are discussed in Chapters 3, 4, 5 and 6. They pertain to partitioning regions (polygons in R2 that satisfy certain obvious conditions) into equilateral, integer length sided, triangles, such that no point, in the region, is a corner of more than three distinct triangles. In Chapter 2 one of the main two theorems on defining sets is established, as is a method for using the above geometric results to prove the nonexistence of certain types of defining sets. In Part II of this thesis, intersection problems, for latin squares and Steiner triple systems, are considered. The seminal works, for problems of these types, are due to Lindner and Rosa (1975) and Fu (1980). A natural progression, from the established literature, for intersection problems between elements in a pair of latin squares or Steiner triple systems is to problems in which the intersection is composed of a number of disjoint configurations (isomorphic copies of some specified partial triple system). In this thesis solutions to two intersection problems for disjoint configurations are detailed. An m-flower, (F,F), is a partial triple system/configuration, such that: F = {{x, yi, zi} | {yi, zi} ∩ {yj , zj} = ∅, for 0 ≤ i, j ≤ m − 1, i 6= j}; and F = UX∈FX. The first such problem considered in this thesis asks for necessary and sufficient conditions for integers k and m ≥ 2 such that a pair of latin squares of order n exists that intersect precisely in k disjoint m-flowers. The necessary terminology, constructions, lemmas and proof for this result are contained in Chapters 7, 8 and 9. The second such problem considered in this thesis asks for necessary and sufficient conditions for integers k such that a pair of Steiner triple systems of order u exists that intersect precisely in k disjoint 2-flowers. This result relies on the solution to the latin square problem and an additional result from Chapter 9. The further constructions and lemmas used to prove this result are detailed in Chapter 10.

Consider distinct latin squares, L and M, of order n. Then the pair (T1, T2) where T1 = L \M and T2 = M \ L is called a latin bitrade. Furthermore T1 and T2 are referred to as latin trades, in which T2 is said to be a disjoint mate of T1 (and vice versa). Drápal (1991) showed that, under certain conditions, a partition of an equilateral triangle of side length n, where n is some integer, into smaller, integer length sided equilateral triangles gives rise to a latin trade within the latin square based on the addition table for the integers modulo n. A partial latin square P of order n is said to be completable if there exists a latin square L of order n such that P ⊆ L. If there is only one such possible latin square, L, of order n then P is said to be uniquely completable and P is called a defining set of L. Furthermore, if C is a uniquely completable partial latin square such that no proper subset of C is uniquely completable, C is said to be a critical set or a minimal defining set. These concepts, namely latin trades and defining sets in latin squares, are intimately connected by the following observation. If L is a latin square and D ⊆ L is a defining set, then D intersects all latin bitrades for which one mate is contained in L. In Part I of this thesis Dr´apal’s result is applied to investigate the structure of certain defining sets in latin squares. The results that are obtained are interesting in themselves; furthermore, the geometric approach to the problem yields additional appealing results. These geometric results are discussed in Chapters 3, 4, 5 and 6. They pertain to partitioning regions (polygons in R2 that satisfy certain obvious conditions) into equilateral, integer length sided, triangles, such that no point, in the region, is a corner of more than three distinct triangles. In Chapter 2 one of the main two theorems on defining sets is established, as is a method for using the above geometric results to prove the nonexistence of certain types of defining sets. In Part II of this thesis, intersection problems, for latin squares and Steiner triple systems, are considered. The seminal works, for problems of these types, are due to Lindner and Rosa (1975) and Fu (1980). A natural progression, from the established literature, for intersection problems between elements in a pair of latin squares or Steiner triple systems is to problems in which the intersection is composed of a number of disjoint configurations (isomorphic copies of some specified partial triple system). In this thesis solutions to two intersection problems for disjoint configurations are detailed. An m-flower, (F,F), is a partial triple system/configuration, such that: F = {{x, yi, zi} | {yi, zi} ∩ {yj , zj} = ∅, for 0 ≤ i, j ≤ m − 1, i 6= j}; and F = UX∈FX. The first such problem considered in this thesis asks for necessary and sufficient conditions for integers k and m ≥ 2 such that a pair of latin squares of order n exists that intersect precisely in k disjoint m-flowers. The necessary terminology, constructions, lemmas and proof for this result are contained in Chapters 7, 8 and 9. The second such problem considered in this thesis asks for necessary and sufficient conditions for integers k such that a pair of Steiner triple systems of order u exists that intersect precisely in k disjoint 2-flowers. This result relies on the solution to the latin square problem and an additional result from Chapter 9. The further constructions and lemmas used to prove this result are detailed in Chapter 10.

It is well known that for any Steiner triple system (STS) one can define a binary operation · upon its base set by assigning x·x = x for all x and x·y = z, where z is the third point in the block containing the pair {x, y}. The same can be done for Mendelsohn triple systems (MTS), directed triple systems (DTS) as well as hybrid triple systems (HTS), where (x, y) is considered to be ordered. In the case of STSs and MTSs the operation yields a quasigroup, however this is not necessarily the case for DTSs and HTSs. A DTS or an HTS which induces a quasigroup is said to be Latin. The quasigroups associated with STSs and MTSs satisfy the flexible law x · (y · x) = (x · y) · x but those associated with Latin DTSs and Latin HTSs need not. A DTS or an HTS is said to be pure if when considered as a twofold triple system it contains no repeated blocks. This thesis focuses on the study of Latin DTSs and Latin HTSs, in particular it aims to examine flexibility, purity and other related properties in these systems. Latin DTSs and Latin HTSs which admit a cyclic or a rotational automorphism are also studied. The existence spectra of these systems are proved and enumeration results are presented. A smaller part of the thesis is then devoted to examining the size of the centre of a Steiner loop and the connection to...