This master's thesis is focused on the structural response due to blast loading, where the geometry used was arbitrary but heavily inspired by Siemens Energy. The aim of the thesis is to gain a better understanding on how to model the blast load and how it affects the structure, as well as to study the modeling of bolts with both pre-tension and a damage criteria in an explicit analysis. Lastly, the importance of strain rate dependent material models was studied. Other aspects such as mass scaling and Rayleigh damping were also investigated. The software used to solve these tasks were Hypermesh, Abaqus and Python. To conclude, the conclusions drawn from this thesis was that bolts should be modeled using connector elements, and including pre-tension is more conservative than not using it for the case studied. However, for the material modeling it gives more conservative results when using a strain rate independent material model compared to the strain rate dependent model, and is advised to be used in the future.