Regional exploration in the Barrow Sub-basin has dominantly focused on structural traps in the Top Barrow Group. A lack of recent discoveries has focused attention more towards the economic potential of the Early Cretaceous intra-Barrow Group plays. The aim of this study was to interpret the seismic sequence stratigraphy and depositional history of the intra-Barrow Group within the Barrow Sub-basin, with emphasis on the identification of stratigraphic traps and potential locations of economic seal/reservoir couplets within the study area. The study area lies south of Barrow Island, and contains the topsets, foresets and toesets of the ‘Barrow delta’, which are an amalgamation of Mesozoic sandprone fluvial, coastal deltaic and deepwater successions. The final stages of the break-up of Gondwana impacted on the structural development of the Barrow Sub-basin, when a large shelf-margin fluvial/deltaic system built out toward the north to northeast, contributing to northerly shelf margin accretion, with largescale clinoform features and associated depositional environments. The dataset comprises the Flinders 3D seismic survey 1267 km² and 35 well logs. Eleven seismic sequences are identified and a seismic sequence stratigraphic framework tied to the wells has been developed, via detailed sequence stratigraphic mapping, integrated with 3D visualisation techniques with the use of Petrel. These eleven second-order sequences are further subdivided into lowstand, transgressive and highstand systems tracts. The movement of the palaeo-shelf break, slope and base of slope can be traced throughout each sequence, displaying an overall trend of building out in a north to northeast direction. A series of palaeo- geographic maps for each sequence has been developed to illustrate the basin’s evolution. The seismic sequences identified display progradation, followed by aggradation, then downstepping, concluding with progradation and aggradation. A high-resolution sequence stratigraphic study of Seismic Sequence 1 showed that several higher-order sequences can be identified, including numerous lowstand systems wedges, along with associated channel features, which could be targeted as new plays. The sequence stratigraphic framework developed, palaeo-geographic reconstructions and all other interpretations made for this project have been integrated to assess the prospectivity of the intra-Barrow Group over the study area, resulting in the identification of a number of leads and prospectivity summaries for each of the 11 Seismic Sequences identified within the intra-Barrow Group. / http://proxy.library.adelaide.edu.au/login?url= http://library.adelaide.edu.au/cgi-bin/Pwebrecon.cgi?BBID=1313353 / Thesis (M.Sc.(Petrol.G&G))-- University of Adelaide, Australian School of Petroleum, 2008

Regional exploration in the Barrow Sub-basin has dominantly focused on structural traps in the Top Barrow Group. A lack of recent discoveries has focused attention more towards the economic potential of the Early Cretaceous intra-Barrow Group plays. The aim of this study was to interpret the seismic sequence stratigraphy and depositional history of the intra-Barrow Group within the Barrow Sub-basin, with emphasis on the identification of stratigraphic traps and potential locations of economic seal/reservoir couplets within the study area. The study area lies south of Barrow Island, and contains the topsets, foresets and toesets of the ‘Barrow delta’, which are an amalgamation of Mesozoic sandprone fluvial, coastal deltaic and deepwater successions. The final stages of the break-up of Gondwana impacted on the structural development of the Barrow Sub-basin, when a large shelf-margin fluvial/deltaic system built out toward the north to northeast, contributing to northerly shelf margin accretion, with largescale clinoform features and associated depositional environments. The dataset comprises the Flinders 3D seismic survey 1267 km² and 35 well logs. Eleven seismic sequences are identified and a seismic sequence stratigraphic framework tied to the wells has been developed, via detailed sequence stratigraphic mapping, integrated with 3D visualisation techniques with the use of Petrel. These eleven second-order sequences are further subdivided into lowstand, transgressive and highstand systems tracts. The movement of the palaeo-shelf break, slope and base of slope can be traced throughout each sequence, displaying an overall trend of building out in a north to northeast direction. A series of palaeo- geographic maps for each sequence has been developed to illustrate the basin’s evolution. The seismic sequences identified display progradation, followed by aggradation, then downstepping, concluding with progradation and aggradation. A high-resolution sequence stratigraphic study of Seismic Sequence 1 showed that several higher-order sequences can be identified, including numerous lowstand systems wedges, along with associated channel features, which could be targeted as new plays. The sequence stratigraphic framework developed, palaeo-geographic reconstructions and all other interpretations made for this project have been integrated to assess the prospectivity of the intra-Barrow Group over the study area, resulting in the identification of a number of leads and prospectivity summaries for each of the 11 Seismic Sequences identified within the intra-Barrow Group. / http://proxy.library.adelaide.edu.au/login?url= http://library.adelaide.edu.au/cgi-bin/Pwebrecon.cgi?BBID=1313353 / Thesis (M.Sc.(Petrol.G&G))-- University of Adelaide, Australian School of Petroleum, 2008

The study area encompasses a region of about 80 square kilometers, centered about Corbett, Oregon. Sieve analyses suggest that the Troutdale Formation is composed of a conglomerate, a coarse-grained sandstone, and a siltstone lithofacies. Measured sections data show that 56 to 60 percent of the Troutdale Formation's exposures are composed of the conglomerate lithofacies. The coarsegrained sandstone lithofacies makes up 34 to 38 percent, while the siltstone lithofacies makes up only 4 to 8 percent. Pebble count data show that the representation of basalt varies from 69 to 100 percent, with an average of 85 percent, while quartzite varies from 0 to 25 percent, with an average of 9 percent. Geochemical data show that at least one formal member and two informal members of the Columbia River Basalt Group (Frenchman Springs, Grande Ronde High Mg, and Grande Ronde Low Mg) compose part of the detritus. The geochemical data also show that rocks of the Boring Lavas or similar lavas are intercalated with the Troutdale Formation, high in the section. Grain mount petrographic data show that volcanic rock fragments are the dominant component in the coarse sand fraction of the Troutdale Formation. Many of the volcanic rock fragments contain brown glass with an index of refraction of 1.583 +/- 0.001, which indicates a mafic composition {silica content of 50 +/- 1 percent). The representation of volcanic rock fragments varies from 29 to 98 percent, with an average of 75 percent. Sedimentary rock fragments, such as chert, vary from 0 to 17 percent, with an average of 5 percent. Biotite ranges from 0 to 12 percent, with an average of 2 percent. Two-thirds of the samples which contain sedimentary rock fragments also contain biotite. Orthopyroxene varies from 0 to 18 percent, with an average of 5 percent. 2 The samples with the three greatest amounts of orthopyroxene do not contain sedimentary rock fragments or biotite.

The upper Nehalem River-Wolf Creek area is located on the northeastern flank of the Tillamook Highlands in the northern Oregon Coast Range. Three rock stratigraphic units underlie the thesis area, and these units range from late Eocene to Oligocene in age.

The southern end of the Black Warrior Basin has been the site of limited drilling operations, but a critical need now exists to establish a greater understanding of the regional stratigraphy. The objectives of this study were to define a sequence stratigraphic framework for the southernmost Black Warrior Basin, to identify chronostratigraphic timelines within depositional environments, identify regional transgressive and high stand systems tracts. This information was used to identify three target reservoirs, characterize petrophysical properties, and confirm integrity of reservoir and seal formations for geologic storage. Methods include correlation of petrophysical well logs in the study area, well log analysis, as well as petrographic and core analyses. Five cycles were identified in well log cross sections. Sequence boundaries will be identified in both cross sections seismic data. Cretaceous sediments deposited above a regional sequence boundary above the Paleozoic that may represent as much as ~141 ma of erosion or non-deposition. The results of this study will contribute to development of a proposed geologic carbon sequestration facility in Kemper County, Mississippi.

No description available.

No description available.

No description available.

The water vole is common in Middle and Late Pleistocene temperate Palaearctic faunas. It is widely used in biostratigraphy because of tem- poral trends in the size, shape and structure of the first lower molar (M1). However, geographic variation in the evolutionary development of the M1 has restricted the precision and accuracy of age-estimations. This thesis explores morphological variation in the M1 of fossil and extant populations of the lineage Mimomys savini–Arvicola, and uses the phenotype and the genotype to develop evolutionary hypotheses. Geometric and traditional morphometric methods are used to quantify tooth shape and enamel thickness from over 4000 digital photographs of M1s taken from specimens originating from 146 modern and fossil groups across the western Palaearctic. M1s are photographed to ob- tain a true cross-section, giving a more accurate description of molar shape. Morphological variation is explored in terms of sample-size, taphonomy, and ontogeny. Sample sizes of less than 10 are likely to provide inaccurate summary statistics of morphometric variables but depositional type appears to have no systematic effect on within-group variation. Change in the morphology of M1s through ontogeny is an im- portant source of morphological variation, explaining up to 29% of mo- lar shape within-specimens and up to 95% of enamel thickness within enamel layers of specimens. Removal of ontogenetic variation from mo- lar shape improves congruence between morphological and molecular data, indicating age-corrected variables should be used when assessing evolutionary patterns. Temporal and spatial patterns in the enamel thickness quotient (SDQ), based on age-corrected enamel thicknesses, mirror those from published data but differ in some details. Method- ological differences mean absolute SDQ values cannot be compared. Qualitative patterns include a large decrease in SDQ across MIS 12 and a steep east–west morphocline during the late Middle Pleistocene.

No description available.