Spelling suggestions: "subject:"subwavelength"" "subject:"dualwavelength""
1 |
All-angle negative refraction of photonic and polaritonic waves in three-dimensionally periodic structuresRose, Alec Daniel January 2009 (has links)
Thesis advisor: Krzysztof Kempa / Though nature provides a plethora of materials to work with, their properties are very much restricted, forcing severe limitations on the devices that are built from them. A huge portion of current technology stands to be significantly advanced and even revolutionized by the emergence of a new class of “configurable” materials. This class, generally referred to as metamaterials, has become more feasible than ever due to advancements in nanotechnology and fabrication techniques. Notable among nature’s limitations is an ever-positive index of refraction. This barrier has only recently been broken, and the known paths to negative refraction are few and limited. This paper introduces two distinct three-dimensional crystals capable of all-angle negative refraction. One uses the familiar photonic band, while the other is the first of its kind to rely on polaritonic waves. Their mode structures are examined and a set of parameters are chosen at which a negative effective index of refraction can be harnessed for unrestricted sub-wavelength lensing, demonstrated via numerical simulation. This work is expected to enable experimental observation of polaritonic negative refraction and sub-wavelength lensing at microwave frequencies. / Thesis (BS) — Boston College, 2009. / Submitted to: Boston College. College of Arts and Sciences. / Discipline: College Honors Program. / Discipline: Physics.
|
2 |
Fabrication and Characterization of Metallic Cavity NanolasersJanuary 2014 (has links)
abstract: Nanolasers represents the research frontier in both the areas of photonics and nanotechnology for its interesting properties in low dimension physics, its appealing prospects in integrated photonics, and other on-chip applications. In this thesis, I present my research work on fabrication and characterization of a new type of nanolasers: metallic cavity nanolasers. The last ten years witnessed a dramatic paradigm shift from pure dielectric cavity to metallic cavity in the research of nanolasers. By using low loss metals such as silver, which is highly reflective at near infrared, light can be confined in an ultra small cavity or waveguide with sub-wavelength dimensions, thus enabling sub-wavelength cavity lasers. Based on this idea, I fabricated two different kinds of metallic cavity nanolasers with rectangular and circular geometries with InGaAs as the gain material and silver as the metallic shell. The lasing wavelength is around 1.55 μm, intended for optical communication applications. Continuous wave (CW) lasing at cryogenic temperature under current injection was achieved on devices with a deep sub-wavelength physical cavity volume smaller than 0.2 λ3. Improving device fabrication process is one of the main challenges in the development of metallic cavity nanolasers due to its ultra-small size. With improved fabrication process and device design, CW lasing at room temperature was demonstrated as well on a sub-wavelength rectangular device with a physical cavity volume of 0.67 λ3. Experiments verified that a small circular nanolasers supporting TE¬01 mode can generate an azimuthal polarized laser beam, providing a compact such source under electrical injection. Sources with such polarizations could have many special applications. Study of digital modulation of circular nanolasers showed that laser noise is an important factor that will affect the data rate of the nanolaser when used as the light source in optical interconnects. For future development, improving device fabrication processes is required to improve device performance. In addition, techniques need to be developed to realize nanolaser/Si waveguide integration. In essence, resolving these two critical issues will finally pave the way for these nanolasers to be used in various practical applications. / Dissertation/Thesis / Ph.D. Electrical Engineering 2014
|
3 |
Feasibility Demonstration of a Massively Parallelizable Near-Field Sensor for Sub-Wavelength Defect Detection and ImagingJanuary 2016 (has links)
abstract: To detect and resolve sub-wavelength features at optical frequencies, beyond the diffraction limit, requires sensors that interact with the electromagnetic near-field of those features. Most instruments operating in this modality scan a single detector element across the surface under inspection because the scattered signals from a multiplicity of such elements would end up interfering with each other. However, an alternative massively parallelized configuration, consisting of a remotely interrogating array of dipoles, capable of interrogating multiple adjacent areas of the surface at the same time, was proposed in 2002.
In the present work a remotely interrogating slot antenna inside a 60nm silver slab is designed which increases the signal to noise ratio of the original system. The antenna is tuned to resonance at 600nm range by taking advantage of the plasmon resonance properties of the metal’s negative permittivity and judicious shaping of the slot element. Full-physics simulations show the capability of detecting an 8nm particle using red light illumination. The sensitivity to the λ/78 particle is attained by detecting the change induced on the antenna’s far field signature by the proximate particle, a change that is 15dB greater than the scattering signature of the particle by itself.
To verify the capabilities of this technology in a readily accessible experimental environment, a radiofrequency scale model is designed using a meta-material to mimic the optical properties of silver in the 2GHz to 5GHz range. Various approaches to the replication of the metal’s behavior are explored in a trade-off between fidelity to the metal’s natural plasmon response, desired bandwidth of the demonstration, and
ii
manufacturability of the meta-material. The simulation and experimental results successfully verify the capability of the proposed near-field sensor in sub-wavelength detection and imaging not only as a proof of concept for optical frequencies but also as a potential imaging device for radio frequencies. / Dissertation/Thesis / Doctoral Dissertation Electrical Engineering 2016
|
4 |
Transmission Properties of Sub-Wavelength Metallic Slits and Their ApplicationsXie, Yong January 2006 (has links)
With the manufacture of nano-scale features in the last ten years, it is possible to do optical experiments on features as small as a tenth/hundredth wavelength. It turns out that the experimental data cannot be explained by classical diffraction theories. Thus, it is necessary to develop new methods or use existing approaches which are effective in other fields, to solve problems in photonics. We use finite difference time domain (FDTD), to study transmission properties of sub-wavelength slits in a metallic film. By doing simulations on periodic and single slits, we confirm that the TE mode has a cutoff while a TM mode always has a propagating mode in the small apertures. Then we find that the transmittance is minimum when the array period is equal to the wavelength of surface plasmon polariton (SPP) at normal incidence. In fact, the SPP-like waves exist in both periodic and isolated slits, and they help the transmittance of small apertures. In order to establish the role of SPP in the transmission mechanism, it is necessary to single out each mode from the total fields. We developed Bloch mode method (BMM) to calculate the amplitudes of the lowest N orders, and the amplitudes tell us which one is dominant (not including the guided mode) at high and low transmission. BMM converges very fast and it is more accurate than FDTD since it does not suffer from numerical dispersion. Both methods can resolve the Wood anomaly and SPP anomaly; however, FDTD converges very slowly at the SPP resonance and oscillates around the value obtained through BMM at the Wood anomaly. BMM is not sensitive to material types, incident angles, and anomalies; it will be a useful tool to investigate similar problems.
|
5 |
Strongly localised plasmons in metallic nanostructuresVernon, Kristy C. January 2008 (has links)
Strongly localised plasmons in metallic nano-structures offer exciting characteristics for guiding and focusing light on the nano-scale, opening the way for the development of new types of sensors, circuitry and improved resolution of optical microscopy. The work presented in this thesis focuses on two major areas of plasmonics research - nano-focusing structures and nano-sized waveguides. Nano-focusing structures focus light to an area smaller than the wavelength and will find applications in sensing, efficiently coupling light to nano-scale devices, as well as improving the resolution of near field microscopy. In the past the majority of nano-focusing structures have been nano-scale cones or tips, which are capable of focusing light to a spot of nano-scale area whilst enhancing the light field. The alternatives are triangular nano-focusing structures which have received far less attention, and only one type of triangular nano-focusing structure is known – a sharp V-groove in a metal substrate. This structure focuses light to a strip of nano-scale width, which may lead to new applications in microscopy and sensing. The difficulty with implementing the V-groove is that the structure is not robust and is quite difficult to fabricate. This thesis aims to develop new triangular nano-focusing devices which will overcome these difficulties, whilst still producing an intense light source on the nano-scale. The two proposed structures presented in this thesis are a metallic wedge submerged in uniform dielectric and a tapered metal film lying on a dielectric substrate, the latter being the easier to fabricate and the more structurally sound and robust. The investigation is performed using the approximation of continuous electrodynamics, the geometrical optics approximation and the zero-plane method. The second aim of this thesis is to investigate plasmonic waveguides and couplers for the development of nano-optical circuitry, more compact photonic devices and sensors. The research will attempt to fill the gaps in the current knowledge of the V-groove waveguide, which consists of a sharp triangular groove in a metal substrate, and the gap plasmon waveguide, which consists of a rectangular slot in a thin metal film. The majority of this work will be performed using the author’s in house finite-difference time-domain algorithm and FEMLAB as well as the effective medium method and geometric optics approximation. The V-groove may be used as either a nano-focusing or waveguiding device. As a waveguide the V-groove is one of the most promising plasmonic waveguides in the optical regime. However, there exist quite a number of gaps in the current knowledge of V-groove waveguides which this thesis will attempt to fill. In particular, the effect of rounded groove tip on plasmon propagation has been assessed for the V-groove. The investigation of rounded groove tip is important, as due to modern fabrication processes it’s not possibly to produce an infinitely sharp groove, and the existing literature has not considered the impact of this problem. The thesis will also investigate the impacts of the inclusion of dielectric filling in the groove on plasmon propagation parameters. This research will be important for optimising the propagation characteristics of the mode for certain applications, but it may also lead to easier methods of fabricating the V-groove device and prevent oxidation of the metal film. The gap plasmon waveguide is easier to fabricate than the V-groove, and is a new type of sub-wavelength waveguide which displays many advantages over other types of plasmon waveguides, including ease of fabrication, almost 100% transmission around sharp bends, sub-wavelength localisation and long propagation distances of the guided mode, etc. This waveguide may prove invaluable in the development of compact photonic devices. In the past the modes supported by this structure were not thoroughly analysed and the possibility of using this structure to develop sub-wavelength couplers for sensing and nano-optical circuits was not considered in detail. This thesis aims to resolve these issues. In conclusion, the results of this thesis will lead to a better understanding of Vgroove and gap plasmon waveguide devices for the development of nano-optical circuits, compact photonic devices and sensors. This thesis also proposes two new nano-focusing structures which are easier to fabricate than the V-groove structure and will lead to applications in sensing, coupling light efficiently into nano-scale devices and improving the resolution of near-field microscopy.
|
6 |
High-gain planar resonant cavity antennas using metamaterial surfacesWang, Shenhong January 2006 (has links)
This thesis studies a new class of high gain planar resonant cavity antennas based on metamaterial surfaces. High-gain planar antennas are becoming increasing popular due to their significant advantages (e.g. low profile, small weight and low cost). Metamaterial surfaces have emerged over the last few years as artificial structures that provide properties and functionalities not readily available from existing materials. This project addresses novel applications of innovative metamaterial surfaces on the design of high-gain planar antennas. A ray analysis is initially employed in order to describe the beamfonning action of planar resonant cavity antennas. The phase equations of resonance predict the possibility of low-profile/subwavelength resonant cavity antennas and tilted beams. The reduction of the resonant cavity profile can be obtained by virtue of novel metamaterial ground planes. Furthermore, the EBG property of metamaterial ground planes would suppress the surface waves and obtain lower backlobes. By suppressing the TEM mode in a resonant cavity, a novel aperture-type EBG Partially Reflective Surface (PRS) is utilized to get low sidelobes in both planes (E-plane and H-plane) in a relatively finite structure. The periodicity optimization of PRS to obtain a higher maximum directivity is also investigated. Also it is shown that antennas with unique tilted beams are achieved without complex feeding mechanism. Rectangular patch antennas and dipole antennas are employed as excitations of resonant cavity antennas throughout the project. Three commercial electromagnetic simulation packages (Flomerics Microstripes ™ ver6.S, Ansoft HFSSTM ver9.2 and Designer ™ ver2.0) are utilized during the rigorous numerical computation. Related measurements are presented to validate the analysis and simulations.
|
7 |
Architectures and protocols for sub-wavelength optical networks: contributions to connectionless and connection-oriented data transportTriay Marquès, Joan 07 October 2011 (has links)
La ràpida evolució d’Internet i l’àmplia gamma de noves aplicacions (per exemple, multimèdia, videoconferència, jocs en línia, etc.) ha fomentat canvis revolucionaris en la manera com ens comuniquem. A més, algunes d’aquestes aplicacions demanden grans quantitats de recursos d’ample de banda amb diversos requeriments de qualitat de servei (QoS).
El desenvolupament de la multiplexació per divisió de longitud d’ona (WDM) en els anys noranta va fer molt rendible la disponibilitat d’ample de banda. Avui dia, les tecnologies de commutació òptica de circuits són predominants en el nucli de la xarxa, les quals permeten la configuració de canals (lightpaths) a través de la xarxa. No obstant això, la granularitat d’aquests canals ocupa tota la longitud d’ona, el que fa que siguin ineficients per a proveir canals de menor ample de banda (sub-longitud d’ona). Segons la comunitat científica, és necessari augmentar la transparència dels protocols, així com millorar l’aprovisionament d’ample de banda de forma dinàmica. Per tal de fer això realitat, és necessari desenvolupar noves arquitectures. La commutació òptica de ràfegues i de paquets (OBS/OPS), són dues de les tecnologies proposades.
Aquesta tesi contribueix amb tres arquitectures de xarxa destinades a millorar el transport de dades sub-longitud d’ona. En primer lloc, aprofundim en la naturalesa sense connexió en OBS. En aquest cas, la xarxa incrementa el seu dinamisme a causa de les transmissions a ràfega. A més, les col·lisions entre ràfegues degraden el rendiment de la xarxa fins i tot a càrregues molt baixes. Per fer front a aquestes col·lisions, es proposa un esquema de resolució de col·lisions pro actiu basat en un algorisme d’encaminament i assignació de longitud d’ona (RWA) que balanceja de forma automàtica i distribuïda la càrrega en la xarxa. En aquest protocol, el RWA i la transmissió de ràfegues es basen en l’explotació i exploració de regles de commutació que incorporen informació sobre contencions i encaminament. Per donar suport a aquesta arquitectura, s’utilitzen dos tipus de paquets de control per a l’encaminament de les ràfegues i l’actualització de les regles de commutació, respectivament. Per analitzar els beneficis del nou algorisme, s’utilitzen quatre topologies de xarxa diferents. Els resultats indiquen que el mètode proposat millora en diferents marges la resta d’algorismes RWA en funció de la topologia i sense penalitzar altres paràmetres com el retard extrem a extrem.
La segona contribució proposa una arquitectura híbrida sense i orientada a connexió sobre la base d’un protocol de control d’accés al medi (MAC) per a xarxes OBS (DAOBS). El MAC ofereix dos mètodes d’accés: arbitratge de cua (QA) per a la transmissió de ràfegues sense connexió, i pre-arbitratge (PA) per serveis TDM orientats a connexió. Aquesta arquitectura permet una àmplia gamma d’aplicacions sensibles al retard i al bloqueig. Els resultats avaluats a través de simulacions mostren que en l’accés QA, les ràfegues de més alta prioritat tenen garantides zero pèrdues i latències d’accés molt baixes. Pel que fa a l’accés PA, es reporta que la duplicació de la càrrega TDM augmenta en més d’un ordre la probabilitat de bloqueig, però sense afectar en la mateixa mesura les ràfegues sense connexió. En aquest capítol també es tracten dos dels problemes relacionats amb l’arquitectura DAOBS i el seu funcionament. En primer lloc, es proposa un model matemàtic per aproximar el retard d’accés inferior i superior com a conseqüència de l’accés QA. En segon lloc, es formula matemàticament la generació i optimització de les topologies virtuals que suporten el protocol per a l’escenari amb tràfic estàtic.
Finalment, l’última contribució explora els beneficis d’una arquitectura de xarxa òptica per temps compartit (TSON) basada en elements de càlcul de camins (PCE) centralitzats per tal d’evitar col·lisions en la xarxa. Aquesta arquitectura permet garantir l’aprovisionament orientat a connexió de canals sub-longitud d’ona. En aquest capítol proposem i simulem tres arquitectures GMPLS/PCE/TSON. A causa del enfocament centralitzat, el rendiment de la xarxa depèn en gran mesura de l’assignació i aprovisionament de les connexions. Amb aquesta finalitat, es proposen diferents algorismes d’assignació de ranures temporals i es comparen amb les corresponents formulacions de programació lineal (ILP) per al cas estàtic. Per al cas de tràfic dinàmic, proposem i avaluem mitjançant simulació diferents heurístiques. Els resultats mostren els beneficis de proporcionar flexibilitat en els dominis temporal i freqüencial a l’hora d’assignar les ranures temporals. / The rapid evolving Internet and the broad range of new data applications (e.g., multimedia, video-conference, online gaming, etc.)
is fostering revolutionary changes in the way we communicate. In addition, some of these applications demand for unprecedented
amounts of bandwidth resources with diverse quality of service (QoS).
The development of wavelength division multiplexing (WDM) in the 90's made very cost-effective the availability of bandwidth.
Nowadays, optical circuit switching technologies are predominant in the core enabling the set up of lightpaths across the network.
However, full-wavelength lightpath granularity is too coarse, which results to be inefficient for provisioning sub-wavelength
channels. As remarked by the research community, an open issue in optical networking is increasing the protocol transparency as
well as provisioning true dynamic bandwidth allocation at the network level. To this end, new architectures are required. Optical
burst/packet switching (OBS/OPS) are two such proposed technologies under investigation.
This thesis contributes with three network architectures which aim at improving the sub-wavelength data transport from different
perspectives. First, we gain insight into the connectionless nature of OBS. Here, the network dynamics are increased due to the
short-lived burst transmissions. Moreover, burst contentions degrade the performance even at very low loads. To cope with them,
we propose a proactive resolution scheme by means of a distributed auto load-balancing routing and wavelength assignment
(RWA) algorithm for wavelength-continuity constraint networks. In this protocol, the RWA and burst forwarding is based on the
exploitation and exploration of switching rule concentration values that incorporate contention and forwarding desirability
information. To support such architecture, forward and backward control packets are used in the burst forwarding and updating
rules, respectively. In order to analyze the benefits of the new algorithm, four different network topologies are used. Results
indicate that the proposed method outperforms the rest of tested RWA algorithms at various margins depending on the topology
without penalizing other parameters such as end-to-end delay.
The second contribution proposes a hybrid connectionless and connection-oriented architecture based on a medium access control
(MAC) protocol for OBS networks (DAOBS). The MAC provides two main access mechanisms: queue arbitrated (QA) for
connectionless bursts and pre-arbitrated (PA) for TDM connection-oriented services. Such an architecture allows for a broad range
of delay-sensitive applications or guaranteed services. Results evaluated through simulations show that in the QA access mode
highest priority bursts are guaranteed zero losses and very low access latencies. Regarding the PA mode, we report that doubling
the offered TDM traffic load increases in more than one order their connection blocking, slightly affecting the blocking of other
connectionless bursts. In this chapter, we also tackle two of the issues related with the DAOBS architecture and its operation.
Firstly, we model mathematically the lower and upper approximations of the access delay as a consequence of the connectionless
queue arbitrated access. Secondly, we formulate the generation of the virtual light-tree overlay topology for the static traffic case.
|
8 |
Transmission And Propagation Properties Of Novel MetamaterialsSahin, Levent 01 January 2009 (has links) (PDF)
Metamaterials attracted significant attention in recent years due to their potential to create novel devices that exhibit specific electromagnetic properties. In this thesis, we investigated transmission and propagation properties of novel metamaterial structures. Electromagnetic properties of metamaterials are characterized and the resonance mechanism of Split Ring Resonator (SRR) structure is investigated. Furthermore, a recent lefthanded metamaterial structure for microwave regime called Fishnet-type metamaterial is studied. We demonstrated the left-handed transmission and negative phase velocity in Fishnet Structures. Finally, we proposed and successfully demonstrated novel approaches that utilize the resonant
behavior of SRR structures to enhance the transmission of
electromagnetic waves through sub-wavelength apertures at microwave frequency regime. We investigated the transmission enhancement of electromagnetic waves through a sub-wavelength aperture by placing SRR structures in front of the aperture and also by changing the aperture shape as SRR-shaped apertures. The incident electromagnetic wave is
effectively coupled to the sub-wavelength aperture causing a strong localization of electromagnetic field in the sub-wavelength aperture. Localized electromagnetic wave gives rise to enhanced transmission from a single sub-wavelength aperture. The proposed structures are designed, simulated, fabricated and measured. The simulations and experimental
results are in good agreement and shows significant enhancement of electromagnetic wave transmission through sub-wavelength apertures by utilizing proposed novel structures. Radius (r) of the sub-wavelength aperture is approximately twenty times smaller than the incident
wavelength (r/& / #955 / ~0.05). This is the smallest aperture size to wavelength ratio in the contemporary literature according to our knowledge.
|
9 |
Cavité réverbérante et résonateurs sub-longueur d'onde : approches numériques et expérimentales / Reverberant cavity and sub-wavelength resonators : experimental and numerical approachesRupin, Matthieu 30 April 2014 (has links)
Ce travail de thèse se décompose en deux parties. Tout d'abord, nous présentons une nouvelle technique de focalisation d'ondes avec un seul émetteur en cavité réverbérante (FIM) en profitant d'un algorithme inspiré du filtre inverse. Via l'étude expérimentale de cavités réverbérantes dans le domaine des ultrasons, nous démontrons la capacité du FIM à optimiser la focalisation quelle que soit le type de cavité (de type ergodique ou non). Dans une deuxième partie, la propagation d'ondes élastiques dans un système formé par un ensemble de tiges d'aluminium collées sur une plaque mince de même nature, est étudiée. Ces tiges (résonateurs quasi-ponctuels) sont arrangées de façon périodique ou aléatoire sur une échelle sub-longueur d'onde. Le métamatériau ainsi constitué révèle la présence de larges bandes de fréquences interdites. De plus, la coexistence de résonances de flexion et de compression dans les résonateurs, ajoutée à la présence d'une conversion d'une partie de l'énergie du mode A0 vers le mode S0 dans la plaque, crée une grande complexité du champ d'onde. C'est ce qui fait de ce type de métamatériau, des objets tout à fait singuliers à l'échelle mésoscopique. / This thesis is divided into two parts. First, we present a new technique for focusing waves with one emitter in reverberant cavity (OCIF) inspired by inverse filter algorithm. Through the experimental study of reverberant cavities in the field of ultrasound, we demonstrate the ability of the OCIF to optimize the focusing no matter what type of cavity (ergodic type or not). In a second part, we investigate the propagation of elastic waves in a system formed by a set of aluminum rods glued to a thin plate of the same material. These rods form a set of quasi-punctual resonators in the propagation plane of waves. It is possible to arrange them periodically or randomly on a subwavelength scale. The metamaterial thus formed shows a complex wave field within it, including the presence of wide prohibited frequency ranges (bandgaps). The experimental and numerical approaches described in this manuscript show the existence of both flexural and compressional resonances in the resonators. Added to the presence of a conversion of a portion of the energy from the $A0$ Lamb mode to the $S0$ one in the plate, such a complexity makes this type of metamaterials, quite unusual objects at the mesoscopic scale.
|
10 |
Circuit-tunable subwavelength terahertz devices / Dispositifs terahertz sub-longueur d'onde accordables par des composants discretsPaulillo, Bruno 21 June 2016 (has links)
La demande croissante en composants optoélectroniques de taille réduite, rapides, de faible puissance et à faible coût oriente la recherche vers des sources et détecteurs de radiation ayant une dimension inférieure à la longueur d'onde émise/détectée. Cette dernière est entravée par la limite de diffraction qui fixe la dimension minimale des dispositifs optiques à la moitié de la longueur d'onde de fonctionnement. A l'inverse, les dispositifs électroniques, tels que les antennes et les oscillateurs, ne sont pas limitée en taille et leur fréquence peut être accordée par des composants discrets. Par conséquent, unifier les mondes de la photonique et de l'électronique permettrait de concevoir de nouveaux dispositifs optoélectroniques sans limitation de taille imposée par la longueur d'onde et ayant des fonctionnalités empruntées aux circuits électroniques. La région spectrale idéale pour développer ce paradigme est la gamme térahertz (THz), à mi-chemin entre les domaines de l'électronique et de l'optique. Dans la première partie de ces travaux, nous présentons de nouveaux micro-résonateurs sub-longueur d’onde en 3D qui fonctionnent comme des circuits LC microscopiques et où la fréquence de résonance peut être accordée en agissant séparément sur la région capacitive et/ou inductive. Dans la deuxième partie, nous illustrons la puissance de cette approche en réalisant de nouveaux méta-dispositifs THz passifs (polaritoniques, commutables optiquement, optiquement actifs) basés sur des composants discrets. La dernière partie de cette thèse est consacrée aux méta-dispositifs actifs. Des photodétecteurs THz à puits quantiques ayant une dimension ≈λ eff /10, en configuration objet unique et réseau sont démontrées, grâce à un schéma de contact efficace et originale pour extraire (injecter) un courant depuis (dans) le cœur semi-conducteur intégré dans chaque résonateur. Enfin, une étude de faisabilité d'un laser sub-longueur d’onde aux fréquences THz est présentée. / The need for small, fast, low-power and low-cost optoelectronic components is driving the research towards radiation sources and detectors having a dimension that is smaller than the emitted/detected wavelength. This is hampered by the optical diffraction limit which constrains the minimum dimension of optical devices at half the operating wavelength. Conversely, electronic devices, such as antennas and oscillating circuits, are not diffraction-limited in size and can be frequency tuned with lumped components. Hence, blending the worlds of photonics and electronics has the potential to enable novel optoelectronic devices with no lower size limit imposed by the wavelength, and with novel functionalities borrowed from electronic circuits. The ideal spectral region to develop this paradigm is the terahertz (THz) range, halfway between the electronics and optics realms. In the first part of this work, we present novel subwavelength 3D micro-resonators that behave as microscopic LC circuits, where the resonant frequency can be tuned acting separately on the capacitive and/or inductive regions. In the second part we illustrate the power of this concept by implementing novel lumped-elements-based passive THz meta-devices (polaritonic, optically switchable, optically active). The last part of this thesis is devoted to active meta-devices. Single-pixel and arrays of THz quantum well photodetectors featuring a ≈λeff/10 dimension are demonstrated, thanks also to an effective and original contact scheme to extract (inject) current from (into) the semiconductor core embedded by each resonator. Finally, a feasibility study of a subwavelength laser at THz frequencies is reported.
|
Page generated in 0.0789 seconds