This paper starts from the single tube condensation theory of shell side inferred by Nusselt , and then analyzes the coefficient of heat transfer of the shell side and the overall heat transfer coefficient of the tube bundle. Referring to the overall heat coefficient of surface condensers and the calculation means of pressure decrease, the HEI, the most exploited one in the commerce is used by combining the basic theory of condenser heat transfer based on the Delphi function language to develop a set of assistant designing software. The software can be used to evaluate the performance of condensers, calculate the sizes of tube materials, and predict the pressure of condensers when the different tube materials are used. When the units are in using, this software also can calculate the cleanliness factor and determine the suitable time to clean the condenser tubes. There are four common used tube materials to compare their performance. They are Al- Brass tubes, 70-30 Cu-Ni tubes, Sea-Cure tubes and Ti tubes. This paper use the software to analyze the performance of the heat transfer of these four different kinds of tube materials and also to calculate the sizes of tubes .And use research papers to analyze the reason of anti-corrosion of these four. In addition, the HEI method can analyze the anti-vibration ability of these four. After comparing with all the performance of the tube materials, and then choosing the best tube material to provide an example for condenser design of new electricity plants or for old electricity plants to change the tube materials.

The aim of this thesis is to design a surface condenser with lateral exhaust. A research in the field of surface condensers with lateral exhaust takes place before the design. Core of the thesis is a thermodynamic design of the heat exchanger, calculation of pressure losses on the side of coolant water, check of the tube bundles from standpoint of oscillation and a design of air removal pipeline. Finally a design of the condenser is supported with a drawing attached in the supplement.

This diploma thesis deals with design of surface condensers with axial steam inlet which are widely used in the energy industry. In the practical part, hydraulic and heat calculation, dump-tube design and calculation of by-pass were made to design surface condenser with axial steam inlet. Two types of surface condenser were designed in order to compare impact of two different heat transfer tube materials. Stainless steel and copper-nickel alloy were used for condenser calculation. Stainless steel and copper-nickel alloy condensers were compared in order to weight calculation and condenser price estimation.