In this research, the adsorptive capacities of kenaf, peat moss, hay, and peanut hulls were evaluated for the removal of TNT and 2,4-DCP from aqueous solutions. Adsorbent loading capacities determined by batch studies were verified by continuous column experiments. It was found that the adsorption capacity of the candidate adsorbents were significantly lower than granular activated carbon (GAC). The impact of surface modification techniques, such as surface oxidation, were evaluated to study the effect on adsorption capacity. At lower equilibrium concentrations of the adsorbate (less than 10 ppb), surface oxidation by ozone showed an increase in the adsorption capacity. The same trend was not observed with peroxone and ultrasound pretreatment. The adsorbent requirement for treating water contaminated with TNT and 2,4-DCP were calculated based on the adsorptive capacity of the adsorbents. Though the adsorbent requirements for the candidate adsorbents were considerably higher than granular activated carbon, the adsorbent requirement costs for most of the candidate adsorbents tested were competitive when compared to GAC costs.