This thesis deals with diffusion and flow of sub-critical hydrocarbons in activated carbon by using a differential permeation method. The hydrocarbons are selected according to the effect on environmental concerns and their unique characteristics such as polarity and affinity towards activated carbon. Although it has been known that transport processes in activated carbon consist of Knudsen diffusion, gaseous viscous flow, adsorbed phase diffusion (so called, surface diffusion) and condensate flow, there have been no rigorous models to describe the transport processes in activated carbon with a full range of pressures. In particular among the four processes, the mechanism of adsorbed phase diffusion in activated carbon is still far from complete understanding. Also due to the dispersion interactions between adsorbing molecules and the solid surface, one would expect that Knudsen diffusion is influenced by the dispersive forces. From intensive experimental observations with a great care over a full range of pressures, conventional methods (for example, direct estimation from inert gas experiments) to determine adsorbed phase diffusion are found to be inadequate for strongly adsorbing vapors in activated carbon. By incorporating the effect of adsorbate-adsorbent interactions into Knudsen diffusivity, the general behavior of adsorbed phase diffusion in terms of pressure (or surface loading) can be obtained, showing a significant role in transport at low pressures. For non-polar hydrocarbons such as benzene, carbon tetrachloride and n-hexane, a mathematical model, which accounts for the effects of adsorbate-adsorbent interactions and pore size distribution, is formulated and validated, resulting in a good agreement with experimental data. Moreover, the adsorption and dynamic behaviors of alcohol molecules (which are polar compounds) are investigated with an aim to compare their behaviors against those of non-polar compounds.

This thesis deals with diffusion and flow of sub-critical hydrocarbons in activated carbon by using a differential permeation method. The hydrocarbons are selected according to the effect on environmental concerns and their unique characteristics such as polarity and affinity towards activated carbon. Although it has been known that transport processes in activated carbon consist of Knudsen diffusion, gaseous viscous flow, adsorbed phase diffusion (so called, surface diffusion) and condensate flow, there have been no rigorous models to describe the transport processes in activated carbon with a full range of pressures. In particular among the four processes, the mechanism of adsorbed phase diffusion in activated carbon is still far from complete understanding. Also due to the dispersion interactions between adsorbing molecules and the solid surface, one would expect that Knudsen diffusion is influenced by the dispersive forces. From intensive experimental observations with a great care over a full range of pressures, conventional methods (for example, direct estimation from inert gas experiments) to determine adsorbed phase diffusion are found to be inadequate for strongly adsorbing vapors in activated carbon. By incorporating the effect of adsorbate-adsorbent interactions into Knudsen diffusivity, the general behavior of adsorbed phase diffusion in terms of pressure (or surface loading) can be obtained, showing a significant role in transport at low pressures. For non-polar hydrocarbons such as benzene, carbon tetrachloride and n-hexane, a mathematical model, which accounts for the effects of adsorbate-adsorbent interactions and pore size distribution, is formulated and validated, resulting in a good agreement with experimental data. Moreover, the adsorption and dynamic behaviors of alcohol molecules (which are polar compounds) are investigated with an aim to compare their behaviors against those of non-polar compounds.

This thesis deals with diffusion and flow of sub-critical hydrocarbons in activated carbon by using a differential permeation method. The hydrocarbons are selected according to the effect on environmental concerns and their unique characteristics such as polarity and affinity towards activated carbon. Although it has been known that transport processes in activated carbon consist of Knudsen diffusion, gaseous viscous flow, adsorbed phase diffusion (so called, surface diffusion) and condensate flow, there have been no rigorous models to describe the transport processes in activated carbon with a full range of pressures. In particular among the four processes, the mechanism of adsorbed phase diffusion in activated carbon is still far from complete understanding. Also due to the dispersion interactions between adsorbing molecules and the solid surface, one would expect that Knudsen diffusion is influenced by the dispersive forces. From intensive experimental observations with a great care over a full range of pressures, conventional methods (for example, direct estimation from inert gas experiments) to determine adsorbed phase diffusion are found to be inadequate for strongly adsorbing vapors in activated carbon. By incorporating the effect of adsorbate-adsorbent interactions into Knudsen diffusivity, the general behavior of adsorbed phase diffusion in terms of pressure (or surface loading) can be obtained, showing a significant role in transport at low pressures. For non-polar hydrocarbons such as benzene, carbon tetrachloride and n-hexane, a mathematical model, which accounts for the effects of adsorbate-adsorbent interactions and pore size distribution, is formulated and validated, resulting in a good agreement with experimental data. Moreover, the adsorption and dynamic behaviors of alcohol molecules (which are polar compounds) are investigated with an aim to compare their behaviors against those of non-polar compounds.

This thesis deals with diffusion and flow of sub-critical hydrocarbons in activated carbon by using a differential permeation method. The hydrocarbons are selected according to the effect on environmental concerns and their unique characteristics such as polarity and affinity towards activated carbon. Although it has been known that transport processes in activated carbon consist of Knudsen diffusion, gaseous viscous flow, adsorbed phase diffusion (so called, surface diffusion) and condensate flow, there have been no rigorous models to describe the transport processes in activated carbon with a full range of pressures. In particular among the four processes, the mechanism of adsorbed phase diffusion in activated carbon is still far from complete understanding. Also due to the dispersion interactions between adsorbing molecules and the solid surface, one would expect that Knudsen diffusion is influenced by the dispersive forces. From intensive experimental observations with a great care over a full range of pressures, conventional methods (for example, direct estimation from inert gas experiments) to determine adsorbed phase diffusion are found to be inadequate for strongly adsorbing vapors in activated carbon. By incorporating the effect of adsorbate-adsorbent interactions into Knudsen diffusivity, the general behavior of adsorbed phase diffusion in terms of pressure (or surface loading) can be obtained, showing a significant role in transport at low pressures. For non-polar hydrocarbons such as benzene, carbon tetrachloride and n-hexane, a mathematical model, which accounts for the effects of adsorbate-adsorbent interactions and pore size distribution, is formulated and validated, resulting in a good agreement with experimental data. Moreover, the adsorption and dynamic behaviors of alcohol molecules (which are polar compounds) are investigated with an aim to compare their behaviors against those of non-polar compounds.

Disordered multicomponent nitride thin film can be used for various applications. The focus of this Licentiate Thesis lies on the theoretical study of piezoelectric properties, phase stability and surface diffusion in multifunctional hard coating nitrides using density functional theory (DFT). Piezoelectric thin films show great promise for microelectromechanical systems (MEMS), such as surface acoustic wave resonators or energy harvesters. One of the main benefits of nitride based piezoelectric devices is the much higher thermal stability compared to the commonly used lead zirconate titanate (PZT) based materials. This makes the nitride based material more suitable for application in, e.g., jet engines. The discovery that alloying AlN with ScN can increase the piezoelectric response more than 500% due to a phase competition between the wurtzite phase in AlN and the hexagonal phase in ScN, provides a fundamental basis for constructing highly responsive piezoelectric thin films. This approach was utilized on the neighboring nitride binaries, where ScN or YN was alloyed with AlN, GaN, or InN. It established the general role of volume matching the binaries to easily achieve a structural instability in order to obtain a maximum increase of the piezoelectric response. For Sc0.5Ga0.5N this increase is more than 900%, compared to GaN. Y1-xInxN is, however, the most promising alloy with the highest resulting piezoelectric response seconded only by Sc0.5Al0.5N. Phase stability and lattice parameters (stress-strain states) of the Y1-xAlxN alloy have been calculated in combination with experimental synthesis. Hard protective coatings based on nitride thin films have been used in industrial applications for a long time. Two of the most successful coatings are TiN and the metastable Ti1-xAlxN. Although these two materials have been extensively investigated both experimentally and theoretically, at the atomic level little is known about Ti1-xAlxN diffusion properties. This is in large part due to problems with configurational disorder in the alloy, because Ti and Al atoms are placed randomly at cation positions in the lattice, considerably increasing the complexity of the problem. To deal with this issues, we have used special quasi-random structure (SQS) models, as well as studying dilute concentrations of Al. One of the most important mechanisms related to the growth of Ti1-xAlxN is surface diffusion. Because Ti1-xAlxN is a metastable material it has to be grown as a thin film with methods such as physical vapor deposition (PVD), in which surface diffusion plays a pivotal role in determining the microstructure evolution of the film. In this work, the surface energetics and mobility of Ti and Al adatoms on a disordered Ti0.5Al0.5N(001) surface are studied. Also the effects on the adatom energetics of Ti, Al, and N by the substitution of one Ti with an Al surface atom in TiN(001), TiN(011), and TiN(111) surfaces is studied. This provides an indepth atomistic understanding of how the energetics behind surface diffusion changes as TiN transitions into Ti0.5Al0.5N. The investigations revealed many interesting results. i) That Ti adatom mobilities are dramatically reduced on the TiN and Ti0.5Al0.5N(001) surfaces while Al adatoms are largely unaffected. ii) The reverse effect is found on the TiN(111) surface, Al adatom migration is reduced while Ti adatom migration is unaffected. iii) The magnetic spin polarization of Ti adatoms is shown to have an important effect on binding energies and diffusion path, e.g., the adsorption energy at bulk sites is increased by 0.14 eV.

No description available.

No description available.

No description available.

Selective dissolution also known as dealloying is a corrosion process in which one component of a binary alloy system is selectively removed through an electrochemically controlled process which leads to the formation of a porous metal "sponge" with a porosity that is completely interconnected and random in direction. Nanoporous metals are desirable since they have larger surface areas than an equal volume of non-porous material. Because of their enormous surface area per volume, these highly porous metal electrodes are superior materials for high surface area applications such as in biomedical devices, microfilters and catalysts. Understanding the kinetic processes governing the development of porosity during dealloying and having ability to change the electrochemical conditions will allow us to better control over the average ligament size and distribution in porosity. The basic kinetic processes involved in the formation of these structures are related to such issues as environmental effects and electrochemical conditions on diffusion, microscopic coarsening phenomenon at room temperature and elevated temperatures, alloy passivation, and Gibbs-Thomson effects. The average pore size and distribution was found to depend on the electrolyte composition, dealloying rate, applied potential and time. The porosity was found to significantly coarsen at room temperature during the dealloying process and this coarsening was highly dependent on the applied potential. It is showed that the commonly accepted measurement of the critical potential for alloy dissolution calculated based on extrapolation of anodic polarization data results in an overestimation of this quantity. A series of constant applied potential experiments prove to be a more accurate method for critical potential determination. / Ph. D.

The aim of this study is to develop a theoretical basis and to perform computational experiments for understanding the grain boundary (GB) grooving in polycrystalline thin film metallic conductors (interconnects) by anisotropic surface diffusion due to capillary, electromigration and elastostatic forces. To this end, irreversible thermo&ndash / kinetics of surfaces and interfaces with triple junction singularities is elaborated, and the resulting well-posed moving boundary value problem is solved using the front&ndash / tracking method. To simulate the strain conditions of the interconnects during service, the problem is addressed within the framework of isotropic linear elasticity in two dimensions (plane strain condition). In the formulation of stress induced surface diffusion, not only the contribution due to elastic strain energy density (ESED) but also that of the elastic dipole tensor interactions (EDTI) between the stress field and the mobile atomic species (monovacancies) is considered. In computation of the elastostatic and electrostatic fields the indirect boundary element method (IBEM) with constant and straight boundary elements is utilized. The resulted non&ndash / linear partial differential equation is solved numerically by Euler&rsquo / s method of finite differences. The dynamic computer simulation experiments identify well known GB groove shapes and shed light on their growing kinetics. They also allow generating some scenarios under several conditions regarding to the applied force fields and/or physicochemical parameters. The destruction of groove symmetry, termination of the groove penetration with isotropic surface diffusivity, ridge/slit formations with anisotropic diffusivity and the role played by the wetting parameter are all identified for electromigration conditions. The kinetics of accelerated groove deepening with an applied tensile stress is examined in connection with GB cavity growth models in the literature and a diffusive micro-crack formation is reported at the groove tip for high stresses. On the other hand, the use of EDTI provided a means to dynamically simulate GB ridges under compressive stress fields with surface diffusion. An incubation time for hillock growth and a crossover depth over which GB migration becomes energetically favorable is defined and discussed in this context.