<p>The present society is highly dependant on complex electronics systems, which have a low damage threshold level. Therefore, there is a high risk of partial or total loss of the system’s electronics when they are exposed to a thunderstorm environment. This calls for a deep understanding on the mechanism related to the interaction of lightning generated electromagnetic fields with various large distributed/scattered systems. To accurately represent the interaction of lightning electromagnetic fields with electrical networks, it is necessary to have return stroke models capable to reproduce the electromagnetic field signatures generated by a lightning flash. Several models have been developed in the recent past to study the field-to-wire coupling mechanism. The most popular, simple and accurate among the available models is the Agrawal et al. model. On the other hand, ATP-EMTP is a well-known transient simulation package widely used by power engineers. This package has various built-in line models like Semlyen, Marti and Noda setups. There is a difficulty in applying the Agrawal et al. model with the built-in line models of ATP-EMTP, as the voltage source due to the horizontal component of electric field in Agrawal et al. model is in series with the line impedance and not in between two transmission line segments. Furthermore, when the electromagnetic field is propagating over a finite conducting ground plane, the soil will selectively attenuate the high frequency content of the electromagnetic field; causing a change in the field wave shape. A finite conducting ground will also produce a horizontal field component at the ground level. Several approximations are available in the literature to obtain the horizontal electric field; namely the wave-tilt and the Cooray-Rubinstein approximation. Consequently, it is important to investigate the change on the induced voltage signature when the power line is located over a finitely conducting ground. Additionally, to provide protection from lightning induced transients it is necessary to use Surge Protective Devices (SPDs) capable of diverting the incoming transients and provide protection level necessary to avoid damage in the equipment. However, standard test procedures of the SPDs do not take into account sub-microsecond structure of the transients. Therefore, to provide the required protection level to sensitive equipments connected to the low voltage power network, it is essential to understand the response of SPDs subjected to high current derivative impulses. This thesis is aimed to investigate the research problems as addressed above. Special attention will be given to a new proposed return stroke model, a simple circuit approach for efficient implementation of Agrawal et al. model using ATP-EMTP, the effect of the soil conductivity on the lightning induced overvoltage signatures and the response of surge protective devices subjected to high current derivative impulses.</p>

The present society is highly dependant on complex electronics systems, which have a low damage threshold level. Therefore, there is a high risk of partial or total loss of the system’s electronics when they are exposed to a thunderstorm environment. This calls for a deep understanding on the mechanism related to the interaction of lightning generated electromagnetic fields with various large distributed/scattered systems. To accurately represent the interaction of lightning electromagnetic fields with electrical networks, it is necessary to have return stroke models capable to reproduce the electromagnetic field signatures generated by a lightning flash. Several models have been developed in the recent past to study the field-to-wire coupling mechanism. The most popular, simple and accurate among the available models is the Agrawal et al. model. On the other hand, ATP-EMTP is a well-known transient simulation package widely used by power engineers. This package has various built-in line models like Semlyen, Marti and Noda setups. There is a difficulty in applying the Agrawal et al. model with the built-in line models of ATP-EMTP, as the voltage source due to the horizontal component of electric field in Agrawal et al. model is in series with the line impedance and not in between two transmission line segments. Furthermore, when the electromagnetic field is propagating over a finite conducting ground plane, the soil will selectively attenuate the high frequency content of the electromagnetic field; causing a change in the field wave shape. A finite conducting ground will also produce a horizontal field component at the ground level. Several approximations are available in the literature to obtain the horizontal electric field; namely the wave-tilt and the Cooray-Rubinstein approximation. Consequently, it is important to investigate the change on the induced voltage signature when the power line is located over a finitely conducting ground. Additionally, to provide protection from lightning induced transients it is necessary to use Surge Protective Devices (SPDs) capable of diverting the incoming transients and provide protection level necessary to avoid damage in the equipment. However, standard test procedures of the SPDs do not take into account sub-microsecond structure of the transients. Therefore, to provide the required protection level to sensitive equipments connected to the low voltage power network, it is essential to understand the response of SPDs subjected to high current derivative impulses. This thesis is aimed to investigate the research problems as addressed above. Special attention will be given to a new proposed return stroke model, a simple circuit approach for efficient implementation of Agrawal et al. model using ATP-EMTP, the effect of the soil conductivity on the lightning induced overvoltage signatures and the response of surge protective devices subjected to high current derivative impulses.