Asset management is getting increasingly important in nearly all fields, especially inthe electric power engineering. It is mainly due to the following two reasons. First isthe high investment cost include the design cost, construction cost, equipment costand the high maintenance cost. Another reason is that there is always a high penaltyfee for the system operator if an interruption happened in the system. Besides, due tothe deregulation of electricity market in these years, the electricity utilities are payingmore attentions to the investment and maintenance cost. And one of their main goalsis to maximize the maintenance performance. So the challenge for the systems is toprovide high-reliability power to the customs and meanwhile be cost-effective for thesuppliers. Reliability Centered Asset Management (RCAM) is one of the bestmethods to solve this problem.The basic RCAM method is introduced first in this thesis. The model includes themaintenance strategy definition, the maintenance cost calculation and an optimizationmodel. Based on the basic model some improvements are added and a new model isproposed. The improvements include the new improvement maintenance strategy,increasing failure rate and a new objective function. The new model is also able toprovide a time-based maintenance plan.The simulation is done to a Swedish distribution system-Birka system by GAMS. Theresults and a sensitivity analysis is presented. A maintenance strategy for 58components and in 120 months is finally found. The impact on the changing failurerate is also shown for the whole peroid. / Kapitalförvaltning har inom alla områdem blivit allt viktigare, speciellt inomelkraftsteknik. Det beror i huvudsak av två orsaker. Den första är storinvesteringskostnad, vilket inkluderar design, konstruktion, utrustning och underhåll.Den andra är den höga straffavgiften för system operatören vid elavbrott. Dessutom,på grund av den nyligen avreglerade elmarknaden, så fäster elföretagen meruppmärksamhet på investerings och underhållskostnader. En av deras huvudmål är attmaximera underhållsprestandan. Så utmaningen för operatörerna är att levereratillförlitlig elkraft till kunder, samtidigt vara kostnadseffektiva mot leveratörer.Reliability Centered Asset Management (RCAM) är bland de bästa metoderna för attlösa detta problem. En enklare RCAM metod är introducerad först i denna rapport.Modellen inkluderar en underhållsstrategi-definition, underhållskostnad-kalkyl och enIIoptimiserings modell. Grundad på denna enklare modell, andra förbättringar ärtillagda och en ny modell är föreslagen. Förbättringarna inrymmer en nyunderhållsstrategi, ökad felfrekvens och en ny målfunktion. Den nya modellentillhandahåller också en tidsbaserad underhållsplan.

This diploma thesis concerns issues of predictive and condition based maintenance system of machine tools with using a vibrodiagnostics. It studies and researches its impacts through the basic processes of the maintenance system and characterizes the vibration diagnosis as its tool and mean. There is also described a process of putting condition based maintenance into practice in the practical part of the thesis. The development is realized at Siemens Ltd. Brno with all its requirements and aspects such as a maintenance audit which means the decision on the suitability of condition based maintenance within the current maintenance system, technical analysis as a part of introduction of vibration diagnosis and the practical example of acquiring, recording and assessment of measured vibration. Prior to the end the economic evaluation of the planned predictive maintenance system and the design of the general model of development and implementation of the maintenance system into practice are included.