This study empirically investigates the validity of the competition and stability trade-off hypothesis for the Turkish banking system. To this end, we consider annual bank level accounting data for the 1990-2008 period and compute the most commonly used measures of banking stability and competition. The effects of macroeconomic factors and bank specific indicators including the ownership structure are also taken into account. The fixed effects panel estimation results suggest that the relation between competition and stability is not invariant to the use of alternative indicators. The results based on the Z-Index as a measure of bank stability support the competition-stability and competition-fragility views when concentration ratios and the H-Statistics are used as the alternative competition indicators, respectively. However, when nonperforming loan ratio, a proxy for loan portfolio risk, is used as a stability measure, exactly the opposite outcome is obtained. The results also change when the ownership structure of banks is considered. Consequently, in line with the literature stating that there is no clear-cut relation between competition and stability, the direction of this relation for the Turkish banking system changes with different model specifications.

Thesis (Ph. D.)--University of Texas at Austin, 2000. / Vita. Includes bibliographical references (leaves 253-261). Available also in a digital version from Dissertation Abstracts.

Thesis (Ph. D.)--Mississippi State University. Department of Electrical and Computer Engineering. / Title from title screen. Includes bibliographical references.

Thesis (M.Eng.)--Memorial University of Newfoundland, 2002. / Bibliography: leaves 116-119.

Thesis (Ph.D)--Electrical and Computer Engineering, Georgia Institute of Technology, 2010. / Committee Chair: Meliopoulos, A. P. Sakis; Committee Member: Deng, Shijie; Committee Member: Divan, Deepakraj; Committee Member: Harley, Ronald; Committee Member: Taylor, David. Part of the SMARTech Electronic Thesis and Dissertation Collection.

No description available.

Conventional power system stabilisers (PSS) are designed to eliminate poorly damped, low frequency power oscillations that occur between remote generating pools or power stations, due to different types and settings of the automatic voltage regulators at different power stations. The supplementary control of the PSS is exerted on the power system through a generator's excitation system to which the PSS is attached. In order to design these conventional power system stabilisers , requires accurate system data and an in-depth knowledge of classical control theory. This thesis investigates the use of an intelligent, non-linear PSS that utilises fuzzy logic techniques. Others have proposed the concept of such a PSS, since it does not require accurate system data. This thesis describes the basic aspects of power system stability . Thereafter the methods of modelling synchronous machines in a multi-machine power system are presented. The sample power system being studied and the simulation packages used in the investigations are introduced and the methods involved to design and tune a conventional power system stabiliser using classical control theory and design methods proposed by others, are discussed. The general concept of fuzzy logic is introduced and the application of fuzzy logic techniques to controller design is explained. Using the principles of fuzzy logic controller design, a fuzzy logic power system stabiliser utilising 9 rules is designed and tuned for the multi-machine power system under investigation. The fuzzy logic stabiliser is then applied to a synchronous motor in a pump storage scheme. Previous work has applied fuzzy logic stabilisers only to synchronous generators . To further compare the performance of the 9 rule fuzzy stabiliser, a 49 rule stabiliser developed by other researchers, and adapted to operate on the synchronous motor, is evaluated. Computer simulated results of each of the stabiliser's performances are presented. The results of the 9 rule fuzzy stabiliser are compared with the performance of a conventional linear stabiliser as well as with a 49 rule fuzzy stabiliser. The robustness properties of the fuzzy stabilisers are evaluated. The results further prove that with proper membership function selection, a simple fuzzy stabiliser that demands very little computational overheads can be achieved to provide adequate system damping. / Thesis (M.Sc. Eng.)-University of Natal, Durban, 2003.

This thesis investigates the design of damping controllers to alleviate the problem of low frequency electro-mechanical oscillations in power systems. The operating point and network parameters of power systems are continually changing, resulting in changes in system dynamics. The conventional controller design methodology has therefore come under increasing scrutiny for its lack of considerations for robustness. The thesis first outlines the conventional design of a power system stabilizer (PSS) and then applies two robust techniques (Hoo and Quantitative Feedback Theory, QFT) to the design problem. The single machine infinite bus (SMIB) model is used to illustrate the procedure for all three design techniques. The final design is undertaken to illustrate the more important problem of robust multi-machine PSS design using QFT. The design requires linearised models of the multi-machine system. A brief discussion is given on how these can be obtained. An introduction to decentralized control design in QFT is included to support the multi-machine design. Chapter three proceeds through the design steps required to generate a conventional PSS. The technique is shown to be simple for a given set of operating conditions. The controller is shown to be adequately robust over the given set of operating conditions albeit not by design. Chapter four introduces a design technique that directly addresses robustness issues during the controller design. For a restricted range of operating conditions the designed controller demonstrates the desired robustness and performance characteristics. The inherent difficulties with Hoo in PSS design become more apparent as the operating range is extended. Chapter five introduces the second robust controller design technique. QFT is shown to be more adept at dealing with increased operating ranges and changing specifications in the single-machine infinite-bus case. The controller is easy to generate and performs well over the entire range of operating conditions. QFT is also applied to the controller design for a four-machine study system. The design is a marginally more complex than in the single machine case but is still easily accomplished. This thesis confirms previous attempts at solving the design problem using the methods outlined above. The performance of all controllers is assessed for small and large disturbances using non-linear time domain simulations with models developed using PSCAD/EMTDC and MATLAB. / Thesis (M.Sc.)-University of Natal,Durban, 2002.

The present thesis tackles the problem of on-line steady state security assessment in electric power transmission networks. The contingencies examined include generation shift as well as line (transformer) outages. / The methodology developed is Pattern Recognition-motivated although not entirely within the frame of traditional statistical Pattern Recognition. / Due to the fact that training samples are rather expensive to obtain in electric power engineering, our first concern was to develop and implement algorithms carrying out the task of intelligently acquiring training points. It is found that these algorithms, permit to substantially reduce the amount of off-line computational effort while, at the same time, the coherency and impartiality of the information contained in the training sets is enhanced. / A new scheme for security assessment (equally applicable for real time security screening) was developed based on the concept of the hyperellipsoids of confidence. It is shown that by proper utilization of the hyperellipsoids of confidence, uncertainty in real time decision making (directly related to the misclassification error) is circumvented. The results of the new methodology were verified by full scale ac simulations. / Finally, the usefulness and potential applicability of the new scheme is demonstrated for EHV equivalents. Its merits are simplicity and reliability in real time environment.

The presence of inter-area oscillations has long affected stability constraints, and therefore, limited the power transfer capacity of interconnected power systems. Adequate damping of these inter-area oscillations is, thus, necessary to secure system operation and ensure system reliability while increasing power transfers. Power system stabilizers (PSS) are the most common devices used to enhance the damping of such oscillations. Many studies have demonstrated that PSSs using remote signals may perform better than using local signals. The advent of phasor measurement units (PMU) makes remote or wide-area signals become available, which enables various important applications. Of particular interest is wide-area damping control (WADC), which aims to utilize remote or wide-area measurements to damp the inter-area oscillations. However, two main challenges in WADC design are (1) feedback controller input signal selection (which PMU signal is best to use?), and (2) latency (which is inherent in the transmission of the measurements) considerations. In response to the first challenge, this thesis proposes a concept called dominant inter-area oscillation path, which serves to pinpoint a set of candidate signals that can be used as the feedback controller inputs by locating the interconnected corridors where the inter-area modal contents are the most observable. Derivation, identification, and use of the dominant inter-area oscillation paths are demonstrated throughout the thesis. Extensive analysis on the relationships between the proposed set of signals and system properties regarding stability and robustness is presented. To tackle the second challenge, the impacts of time delays on the system performance when using the dominant path signals are investigated. To date, several studies have proposed different control design methods using various oscillation dampers to design WADC. Nevertheless, neither a systematic method nor a concept that encompasses fundamental knowledge on power system dynamics has yet been offered. The objective of this thesis is, thus, to propose an analytical framework based on the dominant path concept which is built upon fundamental principles for feedback controller input signal selection in WADC. With this framework, a proper and systematic approach is developed. The proposed method allows to select appropriate signals and use them to effectively mitigate the inter-area oscillations that constrain power transfer capacity and affect system stability. / <p>QC 20150414</p>