River bridges get damaged or even collapse because of various reasons, such as development of adverse hydraulic conditions during severe floods, disastrous earthquakes, deficiencies in structural and geotechnical design, material deficiencies, or other unexpected external factors. Failure of service at vital lifelines, bridges, can lead to loss of several lives and properties, traffic disruption, and/or deficiencies in daily usage. Existing structures should be monitored periodically for decision-making and necessary protective works should be implemented to increase the safety. Types of items to be inspected would be categorized as structural, geotechnical, hydraulic, and status of materials. Requirement for periodic inspections and the ways of handling these activities are discussed within the framework of aforementioned aspects with special reference to the current situation of river bridges in Turkey and current practices in USA. An algorithm, composed of sets of checklists, is proposed. In such an algorithm, rank-based prioritization of events is identified. The evaluation and interpretation are displayed with the help of a few case studies, selected among several river bridges around Ankara.

Railroad bridges are the most important connection parts of railroad networks. These bridges are exposed to heavier train loads compared to highway bridges as well as various detrimental ambient conditions during their life span. The railroad bridges in Turkey are mostly constructed during the late Ottoman and first periods of the Turkish Republic / therefore, they are generally close to about 100 years of age / their inspection and maintenance works are essential. Structural health monitoring (SHM) techniques are widely used around the world in order to increase the effectiveness of the inspection and maintenance works and also evaluate structural reliability. Application of SHM methods on railway bridges by static and dynamic measurements over short and long durations give important structural information about bridge members&rsquo / load level and overall bridge structure in terms of vibration frequencies, deflections, etc. Structural Reliability analysis provides further information about the safety of a structural system and becomes even more efficient when combined with the SHM studies. In this study, computer modeling and SHM techniques are used for identifying structural condition of a steel truss railroad bridge in Usak, Turkey, which is composed of six spans with 30 m length each. The first two spans of the bridge were rebuilt about 50 years ago, which had construction plans and are selected as pilot case for SHM and evaluation studies in this thesis. Natural frequencies are obtained by using 4 accelerometers and a dynamic data acquisition system (DAS). Furthermore, mid span vertical deflection member strains and bridge accelerations are obtained using a DAS permanently left on site and then compared with the computer model analyses results. SHM system is programmed for triggering by the rail load sensors developed at METU and an LVDT to collect mid span deflection high speed data from all sensors during train passage. The DAS is also programmed to collect slow speed data (once at every 15 minutes) for determination of average ambient conditions such as temperature and humidity and all bridge sensors during long term monitoring. Structural capacity and reliability indices for stress levels of bridge members are determined for the measured and simulated train loads to determine structural condition of bridge members and connections. Earthquake analyses and design checks for bridge members are also conducted within the scope of this study.

In Turkey, big investments are made to improve the existing train lines for use of new high speed trains. Most of the bridges on the existing train lines are typical and in this thesis one of the standard types, the classic steel truss bridge is investigated. This thesis presents the dynamic investigation of standard type existing truss bridge for passenger comfort criteria under the high speed train loadings. Two different computational analysis models have been developed to idealize the vehicle-bridge modeling to evaluate the passenger comfort that were influenced by dynamic vibrations on bridges induced by trains. Field tests of this bridge have been conducted by two separate institutes, Middle East Technical University and Turkish State Railways, to determine the state of the bridge under existing low-speed train loadings. Eigenvalue and Time history analysis of the LARSA 4D structural analysis program has been used to investigate the vehicle bridge interactions. The solutions obtained from the analysis have been evaluated with the experimental results. Different rehabilitation options are analytically studied to improve the serviceability of standard steel truss bridges per Eurocode 1990:2002, Eurocode 1991-2:2003, UIC 774-3 and UIC 776-1. The focus of this research is to define a relationship between span weight per meter and passenger comfort as well as the stiffness of this type of bridge.

Recent devastating earthquakes revealed that bridges are one of the most vulnerable components of the transportation systems. These seismic events have emphasized the need to mitigate the risk resulting from the failure of the bridges. Depending on the seismicity of the bridge local site, seismic vulnerability assessment of the bridges can be done based on the fragility curves. These curves are conditional probability functions which give the probability of a bridge attaining or exceeding a particular damage level for an earthquake of a given intensity level. In this dissertation, analytical fragility curves are developed for the ordinary highway bridges in Turkey constructed after the 1990s to be used in the assessment of their seismic vulnerability. Bridges are first grouped into certain major bridge classes based on their structural attributes and sample bridges are generated to account for the structural variability. Nonlinear response history analyses are conducted for each bridge sample with their detailed 3-D analytical models under different earthquake ground motions having varying seismic intensities. Several engineering demand parameters are employed in the determination of seismic response of the bridge components as well as defining damage limit states in terms of member capacities. Fragility curves are obtained from the probability of exceeding each specified damage limit state for each major bridge class. Skew and single-column bent bridges are found to be the most vulnerable ones in comparison with the other bridge classes. Developed fragility curves can be implemented in the seismic risk assessment packages for mitigation purposes.

In this study, dynamic effects on high speed railway bridges under moving traffic are investigated. Within this context, the clear definition of the possible dynamic effects is provided and the related studies that exist in literature are investigated. In the light of those studies, analytical procedures that are defined to find the critical dynamic responses such as deflections, accelerations and resonance conditions are examined and a MatLab programming language is written to obtain the responses for different train loading and velocity values. The reliability of the written program is conformed by comparing the results with the related studies in literature. In addition to the analytical procedures, the approaches in the European standards concerning the dynamic effects of railway traffic are defined. A case study is investigated for a bridge that is in the scope of the Ankara-Sivas High Speed Railway Project. The related bridge is modeled by using finite element program, SAP2000 according to the definitions that are stated in European standards. The related high speed railway bridge is analysed with a real train which is French TGV together with the HSLM trains that are defined in Eurocode and the results obtained are compared with each other. This study also includes the analysis of the bridges performed for 7 different stiffness and 3 different mass values to determine the parameters affecting dynamic behaviour.

Proper bridge design is based on consideration of structural, hydraulic, and geotechnical conformities at an optimum level. The objective of this study is to develop an optimization-based methodology to select appropriate dimensions for components of a river bridge such that the aforementioned design aspects can be satisfied jointly. The structural and geotechnical design parts uses a statisticallybased technique, artificial neural network (ANN) models. Therefore, relevant data of many bridge projects were collected and analyzed from different aspects to put them into a matrix form. ANN architectures are used in the objective function of the optimization problem, which is modeled using Genetic Algorithms with penalty functions as constraint handling method. Bridge scouring reliability comprises one of the constraints, which is performed using Monte-Carlo Simulation technique. All these mechanisms are assembled in a software framework, named as AIROB. Finally, an application built on AIROB is presented to assess the outputs of the software by focusing on the evaluations of hydraulic &ndash / structure interactions.

Integral bridges (IBs) are defined as a class of rigid frame bridges with a single row of piles at the abutments cast monolithically with the superstructure. In the last decade, IBs have become very popular in North America and Europe as they provide many economical and functional advantages. However, standard design methods for IBs have not been established yet. Therefore, most bridge engineers depend on the knowledge acquired from performance of previously constructed IBs and the design codes developed for conventional jointed bridges to design these types of bridges. This include the live load distribution factors used to account for the effect of truck loads on bridge components in the design as well as issues related to the seismic design of such bridges. Accordingly in this study issues related to live load effects as well as seismic effects on IB components are addressed in two separate parts. In the first part of this study, live load distribution formulae for IB components are developed and verified. For this purpose, numerous there dimensional and corresponding two dimensional finite element models (FEMs) of IBs are built and analyzed under live load. The results from the analyses of two and three dimensional FEMs are then used to calculate the live load distribution factors (LLDFs) for the components of IBs (girders, abutments and piles) as a function of some substructure, superstructure and soil properties. Then, live load distribution formulae for the determination of LLDFs are developed to estimate to the live load moments and shears in the girders, abutments and piles of IBs. It is observed that the developed formulae yield a reasonably good estimate of live load effects in IB girders, abutments and piles. In the second part of this study, seismic performance of IBs in comparison to that of conventional bridges is studied. In addition, the effect of several structural and geotechnical parameters on the performance of IBs is assessed. For this purpose, three existing IBs and conventional bridges with similar properties are considered. FEMs of these IBs are built to perform nonlinear time history analyses of these bridges. The analyses results revealed that IBs have a better overall seismic performance compared to that of conventional bridges. Moreover, IBs with thick, stub abutments supported by steel H piles oriented to bend about their strong axis driven in loose to medium dense sand are observed to have better seismic performance. The level of backfill compaction is found to have no influence on the seismic performance of IBs.

In highway bridge construction, composite curved girder bridges are becoming more popular recently. Reduced construction time, long span coverage, economics and aesthetics make them more popular than the other structural systems. Although there exist some methods for the analysis of such systems, each have shortcomings. The use of Finite Element Method (FEM) among these methods is limited except in the academic environments. The use of commercial FEM software packages in the analysis of such systems is cumbersome as it takes too much time to form a model. Considering such problems a computational software was developed called UTRAP in 2002 which analyzes bridges for construction loads by taking into account the early age deck concrete. As the topic of this thesis work, this program was restructured and new features were added. In the following thesis work, the program structure, modeling considerations and recommendations are discussed together with the parametric studies.

ABSTRACT EFFECTS OF VERTICAL EXCITATION ON SEISMIC PERFORMANCE OF HIGHWAY BRIDGES AND HOLD-DOWN DEVICE REQUIREMENT Domani&ccedil / , Kemal Arman M.S., Department of Civil Engineering Supervisor: Assist. Prof. Dr. Alp Caner February 2008, 152 pages Most bridge specifications ignore the contribution of vertical motion in earthquake analyses. However, vertical excitation can develop significant damage, especially at bearing locations as indeed was the case in the recent 1999 izmit Earthquake. These observations, combined with recent developments in the same direction, supplied the motivation to investigate the effects of vertical component of strong ground motion on standard highway bridges in this study. Reliability checks of hold-down device requirements per AASHTO Bridge Specifications have been conducted in this context. Six spectrum compatible accelerograms were generated and time history analyses were performed to observe the uplift at bearings. Selected case studies included precast pre-stressed I-girders with concrete slab, composite steel I-girders, post-tensioned concrete box section, and composite double steel box section. According to AASHTO specifications, hold-down devices were required in two cases, for which actual forces obtained from time history analyses have been compared with those suggested per AASHTO. The only non-linearity introduced to the analyses was at the bearing level. A discussion of effects on substructure response as well as compressive bearing forces resulting from vertical excitation is also included. The results of the study confirmed that the provisions of AASHTO governing hold-down devices are essential and reasonably accurate. On the other hand, they might be interpreted as well to be suggesting that vertical ground motion components could also be included in the load combinations supplied by AASHTO, especially to be able to estimate pier axial forces and cap beam moments accurately under combined vertical and horizontal excitations.

Current seismic design approach of bridge structures can be categorized into two distinctive methods: (i) force based and (ii) performance based. AASHTO LRFD seismic design specification is a typical example of force based design approach especially used in Turkey. Three different importance categories are presented as &ldquo / Critical Bridges&rdquo / , &ldquo / Essential Bridges&rdquo / and &ldquo / Other Bridges&rdquo / in AASHTO LRFD. These classifications are mainly based on the serviceability requirement of bridges after a design earthquake. The bridge&rsquo / s overall performance during a given seismic event cannot be clearly described. Serviceability requirements specified for a given importance category are assumed to be assured by using different response modification factors. Although response modification factor is directly related with strength provided to resisting column, it might be correlated with selected performance levels including different engineering response measures. Within the scope of this study, 27216 single circular bridge column bent models designed according to AASHTO LRFD and having varying column aspect ratio, column diameter, axial load ratio, response modification factor and elastic design spectrum data are investigated through a series of analyses such as response spectrum analysis and push-over analysis. Three performance levels such as &ldquo / Fully Functional&rdquo / , &ldquo / Operational&rdquo / and &ldquo / Delayed Operational&rdquo / are defined in which their criteria are selected in terms of column drift measure corresponding to several damage states obtained from column tests. Using the results of analyses, performance categorization of single bridge column bents is conducted. Seismic responses of investigated cases are identified with several measures such as capacity over inelastic demand displacement and response modification factor.