Organic solar cells have shown great promise of becoming a cheaper alternative to inorganic solar cells. Additionally, they can also be made semitransparent. To avoid using expensive indium tin oxide electrodes in organic solar cells the electrodes can be made from conductive polymer, poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS). However, these so-called PEDOT-PEDOT solar cells are prone to short-circuiting. The work behind this thesis thus aimed to find the cause of these short circuits. The initial working hypothesis assumed the hygroscopic PSS in the bottom electrode could attract water across the active layer when the top electrode layer was applied. This would then swell the bottom electrode and cause the active layer to crack leading to short circuits. Accordingly, swelling was investigated as it was suspected to be the main cause of the shorts. This was achieved by coating reflective substrates with different layers from the solar cell, dropping water on top of the stack and then filming the thin film interference effects. SEM, AFM and IR were also used for further analysis. Although the bottom electrode swells, it was found that water does not cause permanent cracking. Instead, the research unveiled that water causes a formation of blisters, which are suspected to be made of PSS. The exact mechanism for the formation of the shorts remains unclear however.