1 |
Validation of the Thermal Work Limit (TWL) Against Known Heat Stress ExposuresKapanowski, Danielle L. 01 November 2018 (has links)
Workers are exposed to stressful thermal work environments in multiple industries every day. Methods for assessing heat stress often struggle to balance productivity without compromising the health of the workers. The Thermal Work Limit (TWL) is a method that has been adopted in areas outside of the United States as a viable method for heat assessment that combines health with productivity. TWL recommends a maximum metabolic rate for a given set of environmental conditions, clothing ensemble and acclimatization state. The purpose of this paper was to evaluate the validity of the TWL against a set of heat stress data known to be at the maximum sustainable level.
A range of conditions were combined through environmental (20%, 50% and 70% relative humidity), clothing (woven clothing, WC; particle barrier coveralls, PB; water barrier coveralls, WB; and vapor barrier coveralls, VB), and workload factors (metabolic rates at low, L; moderate, M; and high, H) at the transition from sustainable to unsustainable exposure to ensure that the TWL method is thoroughly explored. Data from previous heat stress studies were used to compare the difference in predicted TWL with a calculated value.
An analysis of variance (ANOVA) demonstrated that there were significant effects of the TWL due to clothing, metabolic rate level and relative humidity level. TWL provided similar results for WC, PB and WB, but had systematically lower values for VB. This suggested a more protective recommendation with high evaporative resistance. As the metabolic rate increased, the recommended limiting TWL also went up out of proportion to the metabolic rate, which provided greater protection at increasing metabolic rates. Under drier conditions (20% relative humidity), the TWL was systematically lower than for 50% and 70% relative humidity.
While there were significant differences due to the main effects, the TWL was designed to be used without defined limits on environmental conditions, metabolic rate or clothing. Therefore, all of the conditions represented a comprehensive test of the TWL. Overall, the TWL was less protective than the current methods used by ACGIH Threshold Limit Values (TLV) and National Institute for Occupational Safety and Health (NIOSH) Recommended Exposure Limit (REL). At the threshold, the TWL had a 7% probability of being unsustainable compared to the threshold probability of 1% for the TLV and REL.
|
2 |
Validation of a heat stress index and hydration of workers in tropical AustraliaMiller, Veronica Susan January 2007 (has links)
In many parts of Australia the climate is such that people are working long hours in the heat. Consequences of excessive environmental heat stress range from reduction in safety due to impairment of concentration, to heat illness, which in extreme cases can be fatal. A critical factor in tolerance of workers to environmental heat stress is their level of hydration. Maximising productivity without compromising the health and safety of the work force requires quantification of the degree of stress posed by the thermal environment. For this purpose a number of heat stress indices have been developed. A recently introduced index is the Thermal Work Limit (TWL), which has been widely adopted and implemented in the underground mining industry in Australia. The field use of TWL and protocols in the mining industry with resultant reduction in heat illness and lost production is a practical endorsement of the index, and its validity under controlled conditions has been confirmed by a preliminary study. The further work needed to complete this validation forms part of this thesis. TWL was found to reliably predict the limiting workload in the controlled environment, reinforcing the validity of the algorithm and its application in the workplace. To date TWL has largely been used in the underground environment, however as the algorithm is equally applicable to the above ground environment where radiant heat forms a significant component of the thermal load, field studies were carried out at mining installations in the Pilbara region of Western Australia to evaluate this application of the index. The current industry standard index of heat stress is the Wet bulb Globe Temperature (WBGT). / The shortcomings of this index are widely acknowledged and in practice it is frequently ignored as it is seen to be unnecessarily conservative in many situations. The sensitivity of TWL to the cooling effect of air movement implied that TWL would be more relevant than WBGT as a predictor of the impact of environmental heat stress in outdoor work environments and this was supported by the results. On the strength of this, recommended management protocols linked to TWL similar to those already in place in many underground workplaces, were developed for the management of thermal risk in outdoor work environments. Maintaining adequate hydration is the single most important strategy to counteract the effects of thermal stress. No heat stress index can protect workers from the combined effects of dehydration and thermal stress. To document the hydration status of the outdoor workforce in the Pilbara, the hydration level of groups of workers was assessed from the specific gravity of their urine. To further evaluate whether the fluid replacement behaviour of the workers is adequate to replace fluids lost in sweat, a fluid balance study was carried out to quantify average fluid intakes and sweat fluid losses. The majority of workers were found to be inadequately hydrated at the start of the shift and their fluid intakes were in general well below the requirements to replace sweat losses - let alone improve hydration. Recommendations for fluid intakes based on documented rates of sweat loss are included in the thesis. Based on the findings of this study workable management strategies have been recommended to minimise the risk to outdoor workers in thermally stressful environments.
|
Page generated in 0.0124 seconds