Spelling suggestions: "subject:"test case 1generation"" "subject:"test case 4egeneration""
1 |
Understanding the Effects of Model Evolution Through Incremental Test Case Generation for UML-RT ModelsRapos, ERIC 27 September 2012 (has links)
Model driven development (MDD) is on the rise in software engineering and no more so than in the realm of real-time and embedded systems. Being able to leverage the code generation and validation techniques made available through MDD is worth exploring, and is the focus of much academic and industrial research. However given the iterative nature of MDD, the natural evolution of models causes test case generation to occur multiple times throughout a software modeling project. Currently, the existing process of regenerating test cases for a modified model of a system can be costly, inefficient, and even redundant.
The focus of this research was to achieve an improved understanding of the impact of typical model evolution steps on both the execution of the model and its test cases, and how this impact can be mitigated by reusing previously generated test cases.
In this thesis we use existing techniques for symbolic execution and test case generation to perform an analysis on example models and determine how evolution affects model artifacts; these findings were then used to classify evolution steps based on their impact. From these classifications, we were able to determine exactly how to perform updates to existing symbolic execution trees and test suites in order to obtain the resulting test suites using minimal computational resources whenever possible.
The approach was implemented in a software plugin, IncreTesCaGen, that is capable of incrementally generating test cases for a subset of UML-RT models by leveraging the existing testing artifacts (symbolic execution trees and test suites), as well as presenting additional analysis results to the user.
Finally, we present the results of an initial evaluation of our tool, which provides insight into the tool’s performance, the effects of model evolution on execution and test case generation, as well as design tips to produce optimal models for evolution. / Thesis (Master, Computing) -- Queen's University, 2012-09-26 14:18:50.838
|
2 |
Supported Programming for Beginning DevelopersGilbert, Andrew 01 March 2019 (has links)
Testing code is important, but writing test cases can be time consuming, particularly for beginning programmers who are already struggling to write an implementation. We present TestBuilder, a system for test case generation which uses an SMT solver to generate inputs to reach specified lines in a function, and asks the user what the expected outputs would be for those inputs. The resulting test cases check the correctness of the output, rather than merely ensuring the code does not crash. Further, by querying the user for expectations, TestBuilder encourages the programmer to think about what their code ought to do, rather than assuming that whatever it does is correct. We demonstrate, using mutation testing of student projects, that tests generated by TestBuilder perform better than merely compiling the code using Python’s built-in compile function, although they underperform the tests students write when required to achieve 100% test coverage.
|
3 |
Automatic Generation of Test Cases for Agile using Natural Language ProcessingRane, Prerana Pradeepkumar 24 March 2017 (has links)
Test case design and generation is a tedious manual process that requires 40-70% of the software test life cycle. The test cases written manually by inexperienced testers may not offer a complete coverage of the requirements. Frequent changes in requirements reduce the reusability of the manually written test cases costing more time and effort. Most projects in the industry follow a Behavior-Driven software development approach to capturing requirements from the business stakeholders through user stories written in natural language. Instead of writing test cases manually, this thesis investigates a practical solution for automatically generating test cases within an Agile software development workflow using natural language-based user stories and acceptance criteria. However, the information provided by the user story is insufficient to create test cases using natural language processing (NLP), so we have introduced two new input parameters, Test Scenario Description and Dictionary, to improve the test case generation process. To establish the feasibility, we developed a tool that uses NLP techniques to generate functional test cases from the free-form test scenario description automatically. The tool reduces the effort required to create the test cases while improving the test coverage and quality of the test suite. Results from the feasibility study are presented in this thesis. / Master of Science
|
4 |
A Systematic Approach To Synthesis Of Verification Test-Suites For Modular SoC DesignsSurendran, Sudhakar 11 1900 (has links)
SoCs (System on Chips) are complex designs with heterogeneous modules (CPU, memory, etc.) integrated in them. Verification is one of the important stages in designing an SoC. Verification is the process of checking if the transformation from architectural specification to design implementation is correct. Verification involves creating the following components: (i) a testplan that identifies the conditions to be verified, (ii) a testcase that generates the stimuli to verify the conditions identified, and (iii) a test-bench that applies the stimuli and monitors the output from the design.
Verification consumes upto 70% of the total design time. This is largely due to the complex and manual nature of the verification task. To reduce the time spent in verifying the design, the components used for verification can be generated automatically or created at an abstract level (to reduce the complexity) and reused.
In this work we present a methodology to synthesize testcases from reusable code segments and abstract specifications. Our methodology consists of the following major steps: (i) identifying the structure of testcases, (ii) identifying code segments of testcases that can be reused from one SoC to another, (iii) identifying properties of an SoC and its modules that can be used to synthesize the SoC specific code segments of the testcase, and (iv) proposing a synthesizer that uses the code segments, the properties and the abstract specification to synthesize testcases.
We discuss two specific classes of testcases. These are testcases for verifying the memory modules and the testcases for verifying the data transfer modules. These are considered since they form a significantly large subset of the device functionality. We implement a prototype testcase generator and also present an example to illustrate the use of methodology for each of these classes. The use of our methodology enables (i) the creation of testcases automatically that are correct by construction and (ii) reuse of the testcase code segments from one SoC to another. Some of the properties (of the modules and the SoC) presented in our work can be easily made part of the architectural specification, and hence, can further reduce the effort needed to create them.
|
5 |
A Requirements-Based Partition Testing Framework Using Particle Swarm Optimization TechniqueGanjali, Afshar January 2008 (has links)
Modern society is increasingly dependent on the quality of software systems. Software failure can cause severe consequences, including loss of human life. There are various ways of fault prevention and detection that can be deployed in different stages of software development. Testing is the most widely used approach for ensuring software quality.
Requirements-Based Testing and Partition Testing are two of the widely used approaches for testing software systems. Although both of these techniques are mature and are addressed widely in the literature and despite the general agreement on both of these key techniques of functional testing, a combination of them lacks a systematic approach. In this thesis, we propose a framework along with a procedural process for testing a system using Requirements-Based Partition Testing (RBPT). This framework helps testers to start from the requirements documents and follow a straightforward step by step process to generate the required test cases without loosing any required data. Although many steps of the process are manual, the framework can be used as a foundation for automating the whole test case generation process.
Another issue in testing a software product is the test case selection problem. Choosing appropriate test cases is an essential part of software testing that can lead to significant improvements in efficiency, as well as reduced costs of combinatorial testing. Unfortunately, the problem of finding minimum size test sets is NP-complete in general. Therefore, artificial intelligence-based search algorithms have been widely used for generating near-optimal solutions. In this thesis, we also propose a novel technique for test case generation using Particle Swarm Optimization (PSO), an effective optimization tool which has emerged in the last decade. Empirical studies show that in some domains particle swarm optimization is equally well-suited or even better than some other techniques. At the same time, a particle swarm algorithm is much simpler, easier to implement, and has just a few parameters that the user needs to adjust. These properties make PSO an ideal technique for test case generation. In order to have a fair comparison of our newly proposed algorithm against existing techniques, we have designed and implemented a framework for automatic evaluation of these methods. Through experiments using our evaluation framework, we illustrate how this new test case generation technique can outperform other existing methodologies.
|
6 |
A Requirements-Based Partition Testing Framework Using Particle Swarm Optimization TechniqueGanjali, Afshar January 2008 (has links)
Modern society is increasingly dependent on the quality of software systems. Software failure can cause severe consequences, including loss of human life. There are various ways of fault prevention and detection that can be deployed in different stages of software development. Testing is the most widely used approach for ensuring software quality.
Requirements-Based Testing and Partition Testing are two of the widely used approaches for testing software systems. Although both of these techniques are mature and are addressed widely in the literature and despite the general agreement on both of these key techniques of functional testing, a combination of them lacks a systematic approach. In this thesis, we propose a framework along with a procedural process for testing a system using Requirements-Based Partition Testing (RBPT). This framework helps testers to start from the requirements documents and follow a straightforward step by step process to generate the required test cases without loosing any required data. Although many steps of the process are manual, the framework can be used as a foundation for automating the whole test case generation process.
Another issue in testing a software product is the test case selection problem. Choosing appropriate test cases is an essential part of software testing that can lead to significant improvements in efficiency, as well as reduced costs of combinatorial testing. Unfortunately, the problem of finding minimum size test sets is NP-complete in general. Therefore, artificial intelligence-based search algorithms have been widely used for generating near-optimal solutions. In this thesis, we also propose a novel technique for test case generation using Particle Swarm Optimization (PSO), an effective optimization tool which has emerged in the last decade. Empirical studies show that in some domains particle swarm optimization is equally well-suited or even better than some other techniques. At the same time, a particle swarm algorithm is much simpler, easier to implement, and has just a few parameters that the user needs to adjust. These properties make PSO an ideal technique for test case generation. In order to have a fair comparison of our newly proposed algorithm against existing techniques, we have designed and implemented a framework for automatic evaluation of these methods. Through experiments using our evaluation framework, we illustrate how this new test case generation technique can outperform other existing methodologies.
|
7 |
Automated Selective Test Case Generation Methods for Real-Time SystemsNilsson, Robert January 2000 (has links)
<p>This work aims to investigate the state of the art in test case generation for real-time systems, to analyze existing methods, and to propose future research directions in this area. We believe that a combination of design for testability, automation, and sensible test case selection is the key for verifying modern real-time systems. Existing methods for system-level test case generation for real-time systems are presented, classified, and evaluated against a real-time system model. Significant for real-time systems is that timeliness is crucial for their correctness. Our system model of the testing target adopts the event-triggered design paradigm for maximum flexibility. This paradigm results in target systems that are harder to test than its time-triggered counterpart, but the model improves testability by adopting previously proposed constraints on application behavior. This work investigates how time constraints can be tested using current methods and reveals problems relating to test-case generation for verifying such constraints. Further, approaches for automating the test-case generation process are investigated, paying special attention to methods aimed for real-time systems. We also note a need for special test-coverage criteria for concurrent and real-time systems to select test cases that increase confidence in such systems. We analyze some existing criteria from the perspective of our target model. The results of this dissertation are a classification of methods for generating test cases for real-time systems, an identification of contradictory terminology, and an increased body of knowledge about problems and open issues in this area. We conclude that the test-case generation process often neglects the internal behavior of the tested system and the properties of its execution environment as well as the effects of these on timeliness. Further, we note that most of the surveyed articles on testing methods incorporate automatic test-case generation in some form, but few consider the issues of automated execution of test cases. Four high-level future research directions are proposed that aim to remedy one or more of the identified problems.</p>
|
8 |
Automated Selective Test Case Generation Methods for Real-Time SystemsNilsson, Robert January 2000 (has links)
This work aims to investigate the state of the art in test case generation for real-time systems, to analyze existing methods, and to propose future research directions in this area. We believe that a combination of design for testability, automation, and sensible test case selection is the key for verifying modern real-time systems. Existing methods for system-level test case generation for real-time systems are presented, classified, and evaluated against a real-time system model. Significant for real-time systems is that timeliness is crucial for their correctness. Our system model of the testing target adopts the event-triggered design paradigm for maximum flexibility. This paradigm results in target systems that are harder to test than its time-triggered counterpart, but the model improves testability by adopting previously proposed constraints on application behavior. This work investigates how time constraints can be tested using current methods and reveals problems relating to test-case generation for verifying such constraints. Further, approaches for automating the test-case generation process are investigated, paying special attention to methods aimed for real-time systems. We also note a need for special test-coverage criteria for concurrent and real-time systems to select test cases that increase confidence in such systems. We analyze some existing criteria from the perspective of our target model. The results of this dissertation are a classification of methods for generating test cases for real-time systems, an identification of contradictory terminology, and an increased body of knowledge about problems and open issues in this area. We conclude that the test-case generation process often neglects the internal behavior of the tested system and the properties of its execution environment as well as the effects of these on timeliness. Further, we note that most of the surveyed articles on testing methods incorporate automatic test-case generation in some form, but few consider the issues of automated execution of test cases. Four high-level future research directions are proposed that aim to remedy one or more of the identified problems.
|
9 |
Enhancing System Reliability using Abstraction and Efficient Logical Computation / 抽象化技術と高速な論理演算を利用したシステムの高信頼化Kutsuna, Takuro 24 September 2015 (has links)
京都大学 / 0048 / 新制・課程博士 / 博士(情報学) / 甲第19335号 / 情博第587号 / 新制||情||102(附属図書館) / 32337 / 京都大学大学院情報学研究科知能情報学専攻 / (主査)教授 山本 章博, 教授 鹿島 久嗣, 教授 五十嵐 淳 / 学位規則第4条第1項該当 / Doctor of Informatics / Kyoto University / DFAM
|
10 |
A comparison between random testing and adaptive random testingJohansson, Nicklas, Aareskjold, Ola January 2023 (has links)
Software testing is essential for quality assurance, with automated techniques such as random testing and adaptive random testing being cost-effective solutions compared to others. Adaptive random testing seeks to enhance random testing, and there is a conception that adaptive random testing always should replace random testing. Our research question investigates this conception by addressing a gap in the literature, where a comparison between the two techniques in terms of certain key metrics is missing, namely defect detection efficiency and test case generation time. Defect detection efficiency is the amount of defects detected divided by the number defects in the system multiplied by one hundred. Test case generation time is the time it takes to generate all of the test case inputs. These metrics where chosen as they can be seen as a measurement of the techniques effectiveness and efficiency respectively. In order to address this research question we employ a quantitative experiment where we compare the performance of random testing and adaptive random testing with a sole focus on these two metrics. The comparison is performed by implementing and testing both algorithms on eight error-seeded numerical programs and measuring the results. The results displayed that adaptive random testing had a defect detection efficiency total average of 21.59% and a test case generation time total average of 35.37 (ms), while random testing had a defect detection efficiency total average of 22.28% and a test case generation time total average of 0.26 (ms). These results might contribute to disproving the conception that adaptive random testing always should replace random testing, as random testing evidently performed better on both the measured metrics.
|
Page generated in 0.1109 seconds