Spelling suggestions: "subject:"ethers"" "subject:"aethers""
1 |
The environmental degradation of fibre reinforced pultruded polymer compositesHill, Paul Spencer January 1992 (has links)
No description available.
|
2 |
Inside, OutsidePlicque, Ann 14 May 2010 (has links)
The thesis ―Inside, Outside is a poetry collection of twenty-five poems organized by themes that fit into chapters titled ―Heart and Mind, ―Family, and ―The World
|
3 |
Jovian orbit capture and eccentricity reduction using electrodynamic tether propulsionSchadegg, Maximilian Michael 29 April 2014 (has links)
The use of electrodynamic tethers for propulsion and power generation is attractive for missions to the outer planets, which are traditionally handicapped by large propellant requirements, large times of flight, and a scarcity of power available. The proposed electrodynamic tether propulsion scheme is shown to be capable at reducing or eliminating these mission constraints. In this work, the orbital dynamics of a spacecraft using electrodynamic tether propulsion during the mission phases of capture, apojove pump-down and perijove pump-up in the Jovian system are investigated.
The main result is the mapped design space involving mission duration, tether length and minimum perijove radius. Phase-free flyby sequences and bang-bang control laws are also included, which provide performance upper bounds for a given mission architecture. It is found to be advantageous to utilize in-bound only flybys of the Galilean moons during capture, and few, if any, out-bound only flybys during apojove pump-down. The electrodynamic tether system is also shown to be capable of lowering the spacecraft’s orbit to a Europa-Ganymede Hohmann orbit with a total flight time after entering Jupiter’s sphere of influence of just under two years. The benefits of leveraging solar third body perturbations, ballistic flyby tours, and adding a secondary propulsion system are also considered. / text
|
4 |
Optimal Electrodynamic Tether Phasing and Orbit-Raising ManeuversBitzer, Matthew Scott 17 June 2009 (has links)
We present optimal solutions for a point-mass electrodynamic tether (EDT) performing phasing and orbit-raising maneuvers. An EDT is a conductive tether on the order of 20 km in length and uses a Lorentz force to provide propellantless thrust. We develop the optimal equations of motion using Pontryagin's Minimum Principle. We find numerical solutions using a global, stochastic optimization method called Adaptive Simulated Annealing. The method uses Markov chains and the system's cost function to narrow down the search space. Newton's Method brings the error in the residual to below a specific tolerance. We compare the EDT solutions to similar constant-thrust solutions and investigate the patterns in the solution space. The EDT phasing maneuver has invariance properties similar to constant-thrust phasing maneuvers. Analyzing the solution space reveals that the EDT is faster at performing phasing maneuvers but slower at performing orbit-raising maneuvers than constant-thrust spacecraft. Also several bifurcation lines occur in the solution spaces for all maneuvers studied. / Master of Science
|
5 |
Non-linear Dynamic Modelling and Optimal Control of Aerial Tethers for Remote Delivery and Capture of PayloadsSgarioto, Daniel Emmanuel, s9908712@student.rmit.edu.au January 2006 (has links)
Many potentially useful applications that broadly fall under the umbrella of payload transportation operations have been proposed for aerial towed-cable (ATC) systems, namely the precise capture and delivery of payloads. There remain outstanding issues concerning the dynamics and control of ATC systems that are inhibiting the near-term demonstration of these applications. The development of simplified representations of ATC systems that retain the important dynamics, yet are simple enough for use in control system development is limited. Likewise, little research exists into the development of controllers for ATC systems, especially the development of towing strategies and cable-based control techniques for rendezvous and payload transportation. Thus, this thesis presents novel research into the development of control strategies and simulation facilities that redress these two major anomalies, thereby overcoming a number of hitherto unresolved issues. The primary objective of this thesis is to develop innovative non-linear optimal control systems to manoeuvre a cable towed beneath an aircraft to transport payloads both to and from surface locations. To appropriately satisfy this objective, accurate and efficient modelling capabilities are proposed, yielding the equations of motion for numerous models of the ATC system. A series of techniques for improving the representativeness of simple dynamical models were developed. The benefits of using these procedures were shown to be significant and possible without undue complexity or computational expense. Use of such techniques result in accurate simulations and allow representative control systems to be designed. A series of single and multi-phase non-linear optimal control problems for ATC systems are then formally proposed, which were converted into non-linear programming problems using direct transcription for expedient solution. The possibility of achieving accurate, numerous instantaneous rendezvous of the cable tip with desired surface locations on the ground, in two and three-dimensions, is successfully demonstrated. This was achieved through the use of deployment and retrieval control of the cable and/or aircraft manoeuvring. The capability of the system to safely and accurately transport payloads to and from the surface via control of the cable and/or aircraft manoeuvring is also established. A series of parametric studies were conducted to establish the impact that various parameters have on the ability of the system to perform various rendezvous and payload transportation operations. This allowed important insights into to the nature of the system to be examined. In order for the system to perform rendezvous and payload transportation operations in the presence of wind gusts, a number of simple closed loop optimal feedback controllers were developed. These feedback controllers are based on the linear quadratic regulator control methodology. A preliminary indication of the robustness of ATC systems to wind gusts is provided for through a succession of parametric investigations. The performance of the closed-loop system demonstrates that precise and robust control of the ATC system can be achieved for a wide variety of operating conditions. The research presented in this thesis will provide a solid foundation for further advancing the development of aerial tether payload transportation technology.
|
Page generated in 0.179 seconds