The topic of diploma thesis is to design a cast-in-place tank of sewage plant. The tank has circular shape without ceiling slab and will be completely covered in by soil on sides. The tank is a simple construction with complex relation of foundation. It means the construction will be founded according to second geotechnical category. The tank has to be designed as waterproof construction, which is reached by making white tank system. Calculation was made according to ultimate limit state and limit crack width was assessed according to European standards.

This thesis deals with the design and static assessment of a concrete part of a sewage treatment plant. Specifically, the calculation and assessment of the base plate, external walls, internal walls and ceiling slabs, elaboration of shape and reinforcement drawings of selected structural element. The concrete part of the Sewage disposal plant is all below ground level. Static system and the calculation of internal forces was carried out in Scia Engineer 2011 - student version.

Diploma thesis is focused on solving highway bridge over deep valley. From three studies has been chosen cell box girder with transverse overhangs.The static calculation contains limit states assessment, design of precast and time discetization analysis verification. Structure design contains temporary and pernament situations assessment according to EC. Last part of project is drawnings and visualization.

The thesis deals with the static solution of monolitic reinforced concrete concstruction of hotel building. Subject of the solutions is reinforced concrete monolithic point – supported ceiling slab, columns, foundations and staircase. Assesment of these structures by the first ultimate state – carrying capacity.

The subject of the diploma thesis is the design and static analysis of roof structure. It is prestressed roof shell (membrane) supported by a cable. The whole thesis is divided into several separated units according to task's specification. The text section describes the introduction to the issue of presstressed suspension cable constructions and displays their possible shapes, types and realizations. There is also technical report of solved shell, which was written on the base of the documents, drawn drawings and structural (static) analysis.

The Master´s thesis is focused on the assessment basic parts of the story building. All construction is made from reinforced concrete. The columns, flat plate slabs, flanges and stairways are between the design constructions. The thesis includes working-out of static calculation, drawing shape, reinforcement drawing of all design constructions and results from computer sofware.

This thesis mainly deals with modeling and static analysis of the ceiling structure in the basic environment of ANSYS. The first part is focused on verifying correctness of the model most stressed parts of the structure with a simple hand-static calculation by the process of stress on a continuous beam. The main part is devoted to modeling composite structure, element types, specifying loads and boundary conditions by ANSYS FEM program. In the end, there are the results of stress and deflection presented, and the structure is evaluated at the ultimate limit state and serviceability limit state.

The aim of the thesis is the assessment of steel structure roofing winter stadium in Jihlava city and design of the variant solution of load bearing steel structure of the roof. The ground plan dimensions are 60 x 84 m The current structure is composite of truss main girders with parabolic lower chords, and purlins . Axial distances of main girders are 12 m and are supported on concrete columns. The alternative proposed solution uses arched truss main girders and truss purlins. They are supported on existing concrete columns. All load bearing members of existing and new design structure – main girders, purlins, roof bracing - have been evaluated according to actual normative rules. It is evident that the static assessment of the existing structure is satisfied from viewpoint of ultimate and serviceability limit states. The static assessment of the new structure is satisfied from the viewpoint of both limit states.

The aim of the thesis is the design and assessment of selected elements of a new build multi-storey office building. The supporting structure of monolithic reinforced concrete skeleton is modeled SCIA Engineer and burdened set load cases and combinations. The outputs of the internal forces of the calculation program are dimensioned selected elements. Selected elements include locally supported slab, columns, column shoes, basement wall and footing still. The thesis is selected reinforced concrete elements assessed on the ultimate limit state. The output of this work is static calculation of individual elements. Another part of the output consists of drawings solved elements.

In this master’s thesis I study statical solution of new office building. The load – bearing elements are appraised according to ultimate limit state. Structural analysis contains of dimensioning ceiling plate with ribs, the most stressed support column and footing. There will be applied computer simulation to finding out values of internal forces. The solution is checked by simple method of replacement frames. The main purpose of this thesis consists of elaboration structural analysis, drawing up the technical report and creation design documents of load – bearing elements.