In a wireless fading relay system with multicast/broadcast transmission, one of the most crucial challenges is the optimization of a transmission rate under multiuser channel diversity. Previously reported solutions for mitigating the vicious effect due to multi-user channel diversity have been mainly based on superposition coded multicast, where an optimal power allocation to each layer of modulated signals is determined. Many previous studies investigated a harmonic interplay between the successively re nable (SR) content source and a layered modulation via superposition coding (SPC) over the multicast/broadcast channels. By jointly considering the successive re nement characteristic at the source and the dependency of the layered modulation at the channel, a graceful fexibility can be achieved on a group of users with di erent channel realizations. Here most of the receivers are supposed to obtain the base quality layer information modulated in a lower rate, while the receivers with better channel realizations will obtain more information by re ning the base quality layer information using the enhancement quality layer information. In particular, the optimal power allocation for a SR source over a fading relay channel using broadcast/multicast strategy can be determined such that the minimum distortion of total received information is produced. However, a quality layer of data in a successively refined source may not be decodable if there is any loss of channel codewords, even if the corresponding longterm channel realization is su cient for decoding. To overcome this problem, one of the previous studies introduced a framework of coded video multicast, where multiple description coding (MDC) is applied to an SR content source and is further mapped into a layered modulation via SPC at the channel. Up till now, there has not been a rigorous proof provided on the bene t of manipulating the two coding techniques, (i.e. MDC and SPC), nor has any systematic optimization approach been developed for quantifying the parameter selection. Cooperative relaying in wireless networks has recently received much attention. Because the received signal can be severely degraded due to fading in wireless communications, time, frequency and spatial diversity techniques are introduced to overcome fading. Spatial diversity is typically envisioned as having multiple transmit and/or receive antennas. Cooperation can be used here to provide higher rates and results in a more robust system. Recently proposed cooperation schemes, which take into account the practical constraint that the relay cannot transmit and receive at the same time, include amplify-forward(AF), decode-forward(DF), and compress-forward(CF). In this study, in a fading relay scenario, a proposed framework is investigated to tackle the task of layered power allocation, where an in-depth study is conducted on achieving an optimal power allocation in SPC, such that the information distortion perceived at the users can be minimized. This thesis provides a comprehensive formulation on the information distortion at the receivers and a suite of solution approaches for the developed optimization problem by jointly considering MDC and SPC parameter selection over the fading relay channel.

In a wireless fading relay system with multicast/broadcast transmission, one of the most crucial challenges is the optimization of a transmission rate under multiuser channel diversity. Previously reported solutions for mitigating the vicious effect due to multi-user channel diversity have been mainly based on superposition coded multicast, where an optimal power allocation to each layer of modulated signals is determined. Many previous studies investigated a harmonic interplay between the successively re nable (SR) content source and a layered modulation via superposition coding (SPC) over the multicast/broadcast channels. By jointly considering the successive re nement characteristic at the source and the dependency of the layered modulation at the channel, a graceful fexibility can be achieved on a group of users with di erent channel realizations. Here most of the receivers are supposed to obtain the base quality layer information modulated in a lower rate, while the receivers with better channel realizations will obtain more information by re ning the base quality layer information using the enhancement quality layer information. In particular, the optimal power allocation for a SR source over a fading relay channel using broadcast/multicast strategy can be determined such that the minimum distortion of total received information is produced. However, a quality layer of data in a successively refined source may not be decodable if there is any loss of channel codewords, even if the corresponding longterm channel realization is su cient for decoding. To overcome this problem, one of the previous studies introduced a framework of coded video multicast, where multiple description coding (MDC) is applied to an SR content source and is further mapped into a layered modulation via SPC at the channel. Up till now, there has not been a rigorous proof provided on the bene t of manipulating the two coding techniques, (i.e. MDC and SPC), nor has any systematic optimization approach been developed for quantifying the parameter selection. Cooperative relaying in wireless networks has recently received much attention. Because the received signal can be severely degraded due to fading in wireless communications, time, frequency and spatial diversity techniques are introduced to overcome fading. Spatial diversity is typically envisioned as having multiple transmit and/or receive antennas. Cooperation can be used here to provide higher rates and results in a more robust system. Recently proposed cooperation schemes, which take into account the practical constraint that the relay cannot transmit and receive at the same time, include amplify-forward(AF), decode-forward(DF), and compress-forward(CF). In this study, in a fading relay scenario, a proposed framework is investigated to tackle the task of layered power allocation, where an in-depth study is conducted on achieving an optimal power allocation in SPC, such that the information distortion perceived at the users can be minimized. This thesis provides a comprehensive formulation on the information distortion at the receivers and a suite of solution approaches for the developed optimization problem by jointly considering MDC and SPC parameter selection over the fading relay channel.

No description available.

<p>Motivated by current applications in multihop transmission and ad hoc networks, the classical three-node relay channel consisting of a source-destination pair and a relay has received significant attention. One of the crucial aspects of the relay channel is the design of proper relaying protocols, i.e., how the relay should take part into transmission. The thesis addresses this problem and provides a partial answer to that.</p><p>In this thesis, we propose and study two novel relaying protocols. The first one is based on constellation rearrangement (CR) and is suitable for higher-order modulation schemes. With CR, the relay uses a bit-symbol mapping that is different from the one used by the source. We find the optimal bit-symbol mappings for both the source and the relay and the associated optimal detectors, and show that the improvement over conventional relaying with Gray mapping at the source and the relay can amount to a power gain of several dB. This performance improvement comes at no additional power or bandwidth expense, and at virtually no increase in complexity. The second one is a half-duplex decode-and-forward (DF) relaying scheme based on partial repetition (PR) coding at the relay. With PR, if the relay decodes the received message successfully, it re-encodes the message using the same channel code as the one used at the source, but retransmits only a fraction of the codeword. We analyze the proposed scheme and optimize the cooperation level (i.e., the fraction of the message that the relay should transmit). We compare our scheme with conventional repetition in which the relay retransmits the entire decoded message, and with parallel coding, and additionally with dynamic DF. The finite SNR analysis reveals that the proposed partial repetition can provide a gain of several dB over conventional repetition. Surprisingly, the proposed scheme is able to achieve the same performance as that of parallel coding for some relay network configurations, but at a much lower complexity.</p><p>Additionally, the thesis treats the problem of resource allocation for collaborative transmit diversity using DF protocols with different type of CSI feedback at the source. One interesting observation that emerges is that the joint powerbandwidth allocation only provides marginal gain over the relaying protocols with optimal bandwidth allocation. </p>

We consider a two-way relay channel in which two transmitters want to exchange information through a central relay. The relay observes a superposition of the trans- mitted signals from which a function of the transmitted messages is computed for broadcast. We consider the design of codebooks which permit the recovery of a function at the relay and derive information-theoretic bounds on the rates for reliable decoding at the relay. In the spirit of compute-and-forward, we present a multilevel coding scheme that permits reliable computation (or, decoding) of a class of functions at the relay. The function to be decoded is chosen at the relay depending on the channel realization. We define such a class of reliably computable functions for the proposed coding scheme and derive rates that are universally achievable over a set of channel gains when this class of functions is used at the relay. We develop our framework with general modulation formats in mind, but numerical results are presented for the case where each node transmits using 4-ary and 8-ary modulation schemes. Numerical results demonstrate that the flexibility afforded by our proposed scheme permits substantially higher rates than those achievable by always using a fixed function or considering only linear functions over higher order fields. Our numerical results indicate that it is favorable to allow the relay to attempt both compute-and-forward and decode-and-forward decoding. Indeed, either method considered separately is suboptimal for computation over general channels. However, we obtain a converse result when the transmitters are restricted to using identical binary linear codebooks generated uniformly at random. We show that it is impossible for this code ensemble to achieve any rate higher than the maximum of the rates achieved using compute-and-forward and decode-and-forward decoding. Finally, we turn our attention to the design of low density parity check (LDPC) ensembles which can practically achieve these information rates with joint-compute- and-forward message passing decoding. To this end, we construct a class of two-way erasure multiple access channels for which we can exactly characterize the performance of joint-compute-and-forward message passing decoding. We derive the processing rules and a density evolution like analysis for several classes of LDPC ensembles. Utilizing the universally optimal performance of spatially coupled LDPC ensembles with message passing decoding, we show that a single encoder and de- coder with puncturing can achieve the optimal rate region for a range of channel parameters.

Physical layer network coding (PNC) was proposed under the two-way relay hannel (TWRC) scenario, where two sources exchange information aided by a relay. PNC allows the two sources to transmit to the relay simultaneously, where superimposed signals at the relay can be mapped to network-coded symbols and then be broadcast to both sources instead of being treated as interference. Concurrent transmissions using PNC achieve a higher spectrum efficiency compared to time division and network coding solutions. Existing research mainly focused on the symmetric PNC designs, where the same channel coding and modulation configurations are applied by both sources. When the channel conditions of the two source-relay links are asymmetric or unequal amount of data are exchanged, heterogeneous modulation PNC designs are necessary. In additional, the design and optimization of multi-hop PNC, where multiple relays forming a multi-hop path between the two sources, remains an open issue. The above issues motivate the study of this dissertation. This dissertation investigates the design of heterogeneous modulation physical layer network coding (HePNC), the integration of channel error control coding into HePNC, the combination of HePNC with hierarchical modulation, and the design and generalization of multi-hop PNC. The contributions of this dissertation are four-fold. First, under the asymmetric TWRC scenario, where the channel conditions of the two source-relay links are asymmetric, we designed a HePNC protocol, including the optimization of the adaptive mapping functions and the bit-symbol labeling, to minimize the end-to-end BER. In addition, we developed an analytical framework to derive the BER of HePNC. HePNC can substantially enhance the throughput compared to the existing symmetric PNC under the asymmetric TWRC scenario. Second, we investigated channel coded HePNC and integrated the channel error control coding into HePNC in a link-to-link coding, where the relay tries to decode the superimposed codewords in the multi-access stage. A full-state sum-product decoding algorithm is proposed at the relay based on the repeat-accumulate codes to guarantee reliable end-to-end communication. Third, we proposed hierarchical modulation PNC (H-PNC) under asymmetric TWRC, where additional data exchange between the relay and the source with the relatively better channel condition is achieved in addition to that between the two end sources, benefiting from superimposing the additional data flow on the PNC transmission. When the relay also has the data exchange requirement with the source with a better source-relay channel, H-PNC outperforms HePNC and PNC in terms of the system sum throughput. Fourth, we designed and generalized multi-hop PNC, where multiple relays located in a linear topology are scheduled to support the data exchange between two end sources. The impact of error propagation and mutual interference among the nodes are addressed and optimized. The proposed designs outperform the existing ones in terms of end-to-end BER and end-to-end throughout. / Graduate

No description available.

This dissertation studies a number of important issues that arise in multiple-input multiple-out wireless systems. First, wireless systems equipped with multiple-transmit multiple-receive antennas are considered where an energy-based antenna selection is performed at the receiver. Three different situations are considered: (i) selection over iid MIMO fading channel, (ii) selection over spatially correlated fading channel, and (iii) selection for space-time coded OFDM systems. In all cases, explicit upper bounds are derived and it is shown that using the proposed antenna selection, one can achieve the same diversity order as that attained by full-complexity MIMO systems. Next, joint source-channel coding problem for MIMO antenna systems is studied and a turbo-coded multiple description code for multiple antenna transmission is developed. Simulations indicate that by the proposed iterative joint source-channel decoding that exchanges the extrinsic information between the source code and the channel code, one can achieve better reconstruction quality than that can be achieved by the single-description codes at the same rate. The rest of the dissertation deals with wireless networks. Two problems are studied: channel coding for cooperative diversity in wireless networks, and distributed detection in wireless sensor networks. First, a turbo-code based channel code for three-terminal full-duplex wireless relay channels is proposed where both the source and the relay nodes employ turbo codes. An iterative turbo decoding algorithm exploiting the information arriving from both the source and relay nodes is proposed. Simulation results show that the proposed scheme can perform very close to the capacity of a wireless relay channel. Next the parallel and serial binary distributed detection problem in wireless sensor networks is investigated. Detection strategies based on single-bit and multiple-bit decisions are considered. The expressions for the detection and false alarm rates are derived and used for designing the optimal detection rules at all sensor nodes. Also, an analog approach to the distributed detection in wireless sensor networks is proposed where each sensor nodes simply amplifies-and-forwards its sufficient statistics to the fusion center. This method requires very simple processing at the local sensor. Numerical examples indicate that the analog approach is superior to the digital approach in many cases.

Los canales múltiple-entrada-múltiple-salida (MIMO) han sido ampliamente propuestos para superar los desvanecimientos aleatorios de canal en comunicaciones inalámbricas no selectivas en frecuencia. Basados en equipar tanto transmisores como receptores con múltiple antenas, sus ventajas son dobles. Por un lado, permiten al transmisor: i) concentrar la energía transmitida en una dirección-propia determinada, o ii) codificar entre antenas con el fin de superar desvanecimientos no conocidos de canal. Por otro lado, facilitan al receptor el muestreo de la señal en el dominio espacial. Esta operación, seguida por la combinación coherente de muestras, aumenta la relación señal a ruido de entrada al receptor. De esta forma, el procesado multi-antena es capaz de incrementar la capacidad (y la fiabilidad) de la transmisión en escenarios con alta dispersión.Desafortunadamente, no siempre es posible emplazar múltiples antenas en los dispositivos inalámbricos, debido a limitaciones de espacio y/o coste. Para estos casos, la manera más apropiada de explotar el procesado multi-antena es mediante retransmisión, consistente en disponer un conjunto de repetidores inalámbricos que asistan la comunicación entre un grupo de transmisores y un grupo de receptores, todos con una única antena. Con la ayuda de los repetidores, por tanto, los canales MIMO se pueden imitar de manera distribuida. Sin embargo, la capacidad exacta de las comunicaciones con repetidores (así como la manera en que este esquema funciona con respeto al MIMO equivalente) es todavía un problema no resuelto. A dicho problema dedicamos esta tesis.En particular, la presente disertación tiene como objetivo estudiar la capacidad de canales Gaussianos asistidos por múltiples repetidores paralelos. Dos repetidores se dicen paralelos si no existe conexión directa entre ellos, si bien ambos tienen conexión directa con la fuente y el destino de la comunicación. Nos centramos en el análisis de tres canales ampliamente conocidos: el canal punto-a-punto, el canal de múltiple-acceso y el canal de broadcast, y estudiamos su mejora de funcionamiento con repetidores. A lo largo de la tesis, se tomarán las siguientes hipótesis: i) operación full-duplex en los repetidores, ii) conocimiento de canal tanto en transmisión como en recepción, y iii) desvanecimiento sin memoria, e invariante en el tiempo.En primer lugar, analizamos el canal con múltiples repetidores paralelos, en el cual una única fuente se comunica con un único destino en presencia de N repetidores paralelos. Derivamos límites inferiores de la capacidad del canal por medio de las tasas de transmisión conseguibles con distintos protocolos: decodificar-y-enviar, decodificar-parcialmente-y-enviar, comprimir-y-enviar, y repetición lineal. Asimismo, con un fin comparativo, proveemos un límite superior, obtenido a través del Teorema de max-flow-min-cut. Finalmente, para el número de repetidores tendiendo a infinito, presentamos las leyes de crecimiento de todas las tasas de transmisión, así como la del límite superior.A continuación, la tesis se centra en el canal de múltiple-acceso (MAC) con múltiples repetidores paralelos. El canal consiste en múltiples usuarios comunicándose simultáneamente con un único destino en presencia de N repetidores paralelos. Derivamos una cota superior de la región de capacidad de dicho canal utilizando, de nuevo, el Teorema de max-flow-min-cut, y encontramos regiones de tasas de transmisión conseguibles mediante: decodificar-y-enviar, comprimir-y-enviar, y repetición lineal. Asimismo, se analiza el valor asintótico de dichas tasas de transmisión conseguibles, asumiendo el número de usuarios creciendo sin límite. Dicho estudio nos permite intuir el impacto de la diversidad multiusuario en redes de acceso con repetidores.Finalmente, la disertación considera el canal de broadcast (BC) con múltiples repetidores paralelos. En él, una única fuente se comunica con múltiples destinos en presencia de N repetidores paralelos. Para dicho canal, derivamos tasas de transmisión conseguibles dado: i) codificación de canal tipo dirty paper en la fuente, ii) decodificar-y-enviar, comprimir-y-enviar, y repetición lineal, respectivamente, en los repetidores. Además, para repetición lineal, demostramos que la dualidad MAC-BC se cumple. Es decir, la región de tasas de transmisión conseguibles en el BC es igual a aquélla del MAC con una limitación de potencia suma. Utilizando este resultado, se derivan algoritmos de asignación óptima de recursos basados en teoría de optimización convexa. / Multiple-input-multiple-output (MIMO) channels are extensively proposed as a means to overcome the random channel impairments of frequency-flat wireless communications. Based upon placing multiple antennas at both the transmitter and receiver sides of the communication, their virtues are twofold. On the one hand, they allow the transmitter: i) to concentrate the transmitted power onto a desired eigen-direction, or ii) tocode across antennas to overcome unknown channel fading. On the other hand, they permit the receiver to sample the signal on the space domain. This operation, followed by the coherent combination of samples, increases the signal-to-noise ratio at the input of the detector. In fine, MIMO processing is able to provide large capacity (and reliability) gains within rich-scattered scenarios.Nevertheless, equipping wireless handsets with multiple antennas is not always possible or worthwhile. Mainly, due to size and cost constraints, respectively. For these cases, the most appropriate manner to exploit multi-antenna processing is by means of relaying. This consists of a set of wireless relay nodes assisting the communication between a set of single-antenna sources and a set of single-antenna destinations. With the aid of relays, indeed, MIMO channels can be mimicked in a distributed way. However, the exact channel capacity of single-antenna communications with relays (and how this scheme performs with respect to the equivalent MIMO channel) is a long-standing open problem. To it we have devoted this thesis.In particular, the present dissertation aims at studying the capacity of Gaussian channels when assisted by multiple, parallel, relays. Two relays are said to be parallel if there is no direct link between them, while both have direct link from the source and towards the destination. We focus on three well-known channels: the point-to-point channel, the multi-access channel and the broadcast channel, and study their performance improvement with relays. All over the dissertation, the following assumptions are taken: i) full-duplex operation at the relays, ii) transmit and receive channel state information available at all network nodes, and iii) time-invariant, memory-less fading.Firstly, we analyze the multiple-parallel relay channel, where a single source communicates to a single destination in the presence of N parallel relays. The capacity of the channel is lower bounded by means of the achievable rates with different relaying protocols, i.e. decode-and-forward, partial decode-and-forward, compress-and-forward and linear relaying. Likewise, a capacity upper bound is provided for comparison, derived using the max-flow-min-cut Theorem. Finally, for number of relays growing to infinity, the scaling laws of all achievable rates are presented, as well as the one of the upper bound.Next, the dissertation focusses on the multi-access channel (MAC) with multiple-parallel relays. The channel consists of multiple users simultaneously communicating to a single destination in the presence of N parallel relay nodes. We bound the capacity region of the channel using, again, the max-flow-min-cut Theorem and find achievable rate regions by means of decode-and-forward, linear relaying and compress-and-forward. In addition, we analyze the asymptotic performance of the obtained achievable sum-rates, given the number of users growing without bound. Such a study allows us to grasp the impact of multi-user diversity on access networks with relays.Finally, the dissertation considers the broadcast channel (BC) with multiple parallel relays. This consists of a single source communicating to multiple receivers in the presence of N parallel relays. For the channel, we derive achievable rate regions considering: i) dirty paper encoding at the source, and ii) decode-and-forward, linear relaying and compress-and-forward, respectively, at the relays. Moreover, for linear relaying, we prove that MAC-BC duality holds. That is, the achievable rate region of the BC is equal to that of the MAC with a sum-power constraint. Using this result, the computation of the channel's weighted sum-rate with linear relaying is notably simplified. Likewise, convex resource allocation algorithms can be derived.

abstract: There are many wireless communication and networking applications that require high transmission rates and reliability with only limited resources in terms of bandwidth, power, hardware complexity etc.. Real-time video streaming, gaming and social networking are a few such examples. Over the years many problems have been addressed towards the goal of enabling such applications; however, significant challenges still remain, particularly, in the context of multi-user communications. With the motivation of addressing some of these challenges, the main focus of this dissertation is the design and analysis of capacity approaching coding schemes for several (wireless) multi-user communication scenarios. Specifically, three main themes are studied: superposition coding over broadcast channels, practical coding for binary-input binary-output broadcast channels, and signalling schemes for two-way relay channels. As the first contribution, we propose an analytical tool that allows for reliable comparison of different practical codes and decoding strategies over degraded broadcast channels, even for very low error rates for which simulations are impractical. The second contribution deals with binary-input binary-output degraded broadcast channels, for which an optimal encoding scheme that achieves the capacity boundary is found, and a practical coding scheme is given by concatenation of an outer low density parity check code and an inner (non-linear) mapper that induces desired distribution of "one" in a codeword. The third contribution considers two-way relay channels where the information exchange between two nodes takes place in two transmission phases using a coding scheme called physical-layer network coding. At the relay, a near optimal decoding strategy is derived using a list decoding algorithm, and an approximation is obtained by a joint decoding approach. For the latter scheme, an analytical approximation of the word error rate based on a union bounding technique is computed under the assumption that linear codes are employed at the two nodes exchanging data. Further, when the wireless channel is frequency selective, two decoding strategies at the relay are developed, namely, a near optimal decoding scheme implemented using list decoding, and a reduced complexity detection/decoding scheme utilizing a linear minimum mean squared error based detector followed by a network coded sequence decoder. / Dissertation/Thesis / Ph.D. Electrical Engineering 2011