International Telemetering Conference Proceedings / October 23-26, 2000 / Town & Country Hotel and Conference Center, San Diego, California / A thinned array sensor system develops error voltages for steering dish antennas from signals arriving over a broad range of angles, thereby eliminating need for a priori knowledge of signal location.

International Telemetering Conference Proceedings / October 22-25, 2001 / Riviera Hotel and Convention Center, Las Vegas, Nevada / Multiple same-frequency signals including direct/multipath signals are distinguished and individually tracked by measuring phase differences between sum and error channels of thinned array systems.

<p>In this thesis, we develop methods for addressing the deficiencies of array processing with linear thinned arrays. Our methods are designed for array systems mounted on moving platforms and exploit synthetic aperture processing techniques. In particular, we use array motion to decrease the sidelobe levels and increase the degrees of freedom available from thinned array systems. In this work, we consider two application areas 1) passive SONAR and 2) ultrasound imaging. </p><p>Synthetic aperture processing is a methodology for exploiting array motion and has been successfully used in practice to increase array resolution. By spatially sampling along the path of the array virtual sensors can be realized and coherently fused to the existing array. The novel contribution of this work is our application of synthetic aperture processing. Here our goal is not to increase array resolution, instead we propose to use the synthetic aperture process to expand the spatial covariance and spatial frequency sensing capabilities of thinned array system.</p><p> </p><p>In the passive sensing case, we use a class of thinned arrays know as co-prime linear sensor arrays for source localization. The class of co-prime arrays provides roughly half the aperture worth of spatial covariances and with modest array motion can be extended to the full aperture of the array. The amount of motion required to produce a full set of spatial covariances is shown to be a function of the co-prime array parameters and is only a fraction of the total aperture of the array. The full set of spatial covariances can be used to form a spatial covariance matrix with dimension equal to that of a uniform array. With a spatial covariance matrix in hand one can perform signal processing tasks as if the array were fully populated. Three methods for spatial covariance matrix estimation are compared in different source localization scenarios. In the work presented here, we demonstrate the benefits of our approach for achieving reduced sidelobe levels and extending the source localization capabilities above the limits of the static co-prime array. </p><p>In the active sensing case, we develop a framework for incorporating motion using thinned arrays for ultrasound imaging. In this setting, array motion is used to augment the spatial frequency sensing capabilities of the thinned array system. Here we develop an augmentation strategy based on using quarter-wavelength array translations to fill-in missing spatial frequencies not measured by the static thinned array. The quarter-wavelength translation enables the thinned array system to sample missing spatial frequencies and increase the redundancy of other spatial frequencies sampled by the array. We compare the level of redundancy in sampling the spatial frequencies achieved by the thinned arrays post translation to different levels of sample redundancy derived from pruning the transmit/receive events of a uniform array. In this manner, we are able to examine how the level of spatial frequency redundancy afforded by different thinned arrays compare over the full redundancy range of the uniform array. While artificially pruning the uniform array does not necessarily create realizable arrays, it provides the means to compare image quality at different spatial frequency redundancy levels. In this work, we are able to conclude that images formed from thinned arrays using the translated synthetic aperture process are capable of approximating images formed from the corresponding uniform array. In particular, the systems considered in this work have approximately one-third of the active sensors when compared to the uniform array. </p><p>In both application areas, the use of thinned arrays offers a reduction in the cost to deploy and maintain a given array system. The feature that makes it possible to overcome the spatial sampling deficiencies of thinned array systems is motion and it is at the core of the performance gains in these applications.</p> / Dissertation

A 94.8 GHz interferometric imaging system utilizing aperture synthesis and tomography is developed for the Center for Advanced Sensor and Communication Antennas. Whereas typical interferometer designs employ multiple antennas to synthesize an aperture for image reconstruction, this unique interferometer will reproduce a scene's brightness temperature with only two antennas. To achieve this, the aperture synthesis is done with one antenna remaining stationary while the second antenna is moved at discrete increments along two controlled tracks. The two signals received by the antennas are cross-correlated to produce measured visibility function samples. The visibility samples reconstruct the scene brightness temperature through an inverse Fourier transform relationship.