No description available.

The core aim of this research project was to improve understanding of the effects of microstructure and crystallographic texture on the high strain rate plastic deformation behaviour of the industrially important Titanium alloy, Ti-6Al-4V. To facilitate this study, four rolled plates of Ti-6Al-4V, with varying thermo-mechanical processing histories, were provided by TIMET Corp., the world’s largest supplier of Titanium product. To determine the nature of each plate’s microstructure and the crystallographic texture of the dominant α phase, the four Ti-6Al-4V plates were microstructurally characterised using techniques such as optical microscopy and electron backscatter diffraction (EBSD). To determine the effects of the measured microstructures and textures on the strain rate dependent plastic deformation behaviour of the four Ti-6Al-4V plates, uniaxial compression and tension tests were carried out in the three orthogonal material orientations at quasi-static (10^-3 s^-1) and high strain rates (10^3 s^-1) using a standard electro-mechanical test device and split-Hopkinson pressure bars (SHPB), respectively. To provide further understanding of the effects of microstructure and texture on the plastic deformation behaviour of Ti-6Al-4V, this time under complex impact loading conditions, the classic Taylor impact experiment was adapted to include an optical measurement and geometry reconstruction technique. A novel experimental setup was designed that consists of an ultra-high speed camera and mirror arrangement, allowing the Taylor impact specimen to be viewed from multiple angles during the experiment. Using the previously mentioned optical measurement and geometry reconstruction technique, it was then possible to gain valuable, previously unobtainable, data on the deformation history of Taylor impact specimens in-situ, such as the major/minor axes of the anisotropically deforming elliptical specimen cross-sections as a function of time and axial position, true strain as a function of time and axial position, and the true strain rate as a function of axial position. The technique was verified by testing a specimen cut from the in-plane material orientation of a clock-rolled high purity Zirconium plate. The output measurements from a post-deformation image frame were compared with measurements of the recovered specimen made using a coordinate measurement machine (CMM), with analysis showing excellent agreement between the two techniques. The experiment was then carried out on specimens cut from the two orthogonal in-plane material orientations of one of the four Ti-6Al-4V plates. Analysis of the data from these experiments gave significant insight into the plastic deformation behaviour of macroscopically textured Ti-6Al-4V under complex impact loading. Recovered Ti-6Al-4V specimens from the outlined Taylor impact experiments were then sectioned along specific planes and microstructurally characterised using EBSD, with comparisons made between the pre and post-deformation microstructures. From this analysis, and the previously discussed geometry reconstruction technique, insight was gained into the effects of micro-texture on the general anisotropic plastic deformation behaviour of Ti-6Al- 4V plate materials and in particular the role of micro-texture on the formation of deformation twins. Finally, the understanding gained from these experiments, and a detailed review of the literature, was used to inform a novel, physically based material modelling framework, capable of capturing the effects of microstructure and texture on the strain rate and temperature dependent plastic deformation behaviour of Ti-6Al-4V. The model was implemented in the computational software package, MATLAB, and verified by comparison with the mechanical characterisation results from one of the Ti-6Al-4V plates. A number of frameworks are discussed for implementing the new Ti-6Al-4V model within finite element (FE) analysis software packages, such as ABAQUS, LS-DYNA and DEFORM. It is hoped that the new Ti-6Al-4V model can be used to optimise the design of Ti-6Al-4V components and structures for impact loading scenarios.

The optimisation of compressor stage aerofoil and fan blade design remains an important area of titanium alloy research and development for aerospace gas turbines. Such research has important implications for critical and sensitive component integrity and efficiency. In particular, a better understanding of how deformation twinning interacts with microstructural features in titanium alloys is required, because such twinning facilitates plastic deformation at a higher strain rate than dislocations. To investigate this behaviour, commercial purity titanium and the titanium alloy Ti–6Al–4V were subjected to ballistic impact testing at room temperature with a high strain rate of 10³s⁻¹. In addition, a detailed analysis was conducted of three manufacturing processes of Ti–6Al–4V (wt. %) that are likely to cause deformation twinning: metallic shot peening, laser shock peening and deep cold rolling. The results presented in this thesis have furthered the understanding of the role of deformation twinning in the plastic deformation of α-phase titanium. Key findings of the research include the characterisation of deformation twinning types and the conditions that favour certain deformation twinning types. From the analysis of the ballistic testing of commercial purity titanium, the first definitive evidence for the existence of {112‾4} twinning as a rare deformation twinning mode at room temperature in coarse-grained commercial purity titanium is presented. In addition, the ballistic testing results of the Ti–6Al–4V alloy highlighted very different deformation twinning characteristics. Commercial purity titanium deformed plastically by a combination of {101‾2} and {112‾1} tensilve twinning and {112‾4} and {112‾2} compression twinning modes. By contrast, the deformation twinning of Ti–6Al–4V was limited to only the {101‾2} and {112‾1} tensile twinning modes. The two tensile deformation twinning types have very different morphologies in equiaxed fine grained Ti–6Al–4V. {112‾1} deformation twins span multiple grain boundaries and {101‾2} deformation twins reorient entire grains to a twinned orientation. This observation provides evidence for whole grain twinning of equiaxed fine grained Ti–6Al–4V by {101‾2} twinning. Grain boundary interactions between various deformation twinning types and alpha phase grain boundaries in commercial purity titanium and Ti–6Al–4V are reported and analysed. In commercial purity titanium {101‾2} as well as other deformation twinning types were observed interacting across alpha phase boundaries and higher angle alpha phase grain boundaries. The analyses of the manufacturing processes of Ti–6Al–4V highlight the very different dislocation and deformation twinning structures in surfaces processed by these techniques. A notable feature of material processed by laser shock peening is the almost complete absence of deformation twinning, contrasting with the frequent observation of extensive deformation twinning observed in the material processed by metallic shot peening and deep cold rolling. Therefore, the findings suggest that there is a strain rate limit above which deformation twinning is suppressed. The implications of this research are that a better understanding of the conditions that that favour certain deformation twinning types or propagation behaviours will enable more accurate plasticity modelling and better alloy design. This is important for the design and the manufacturing of titanium components and the high strain rate deformation to which titanium components in aerospace gas turbines can be subjected because of bird strike, foreign object debris ingestion or fan blade failures.

A artrose, também chamada de osteoartrose ou osteoartrite (OA), é a terceira doença de maior incidência no Mundo. Nesse trabalho, buscou-se criar uma lesão osteocartilaginosa em joelhos de ratos Wistar machos com seis meses de vida, objetivando constituir um modelo animal para estudo da OA humana e, a partir desse modelo, avaliar biomateriais de forma isolada ou associados entre si e avaliados quanto à sua segurança biológica e potencial de reparação tecidual. Além disto, foi analisado o efeito reparador de células-tronco mesenquimais da polpa do dente de leite humano (MSC) isoladamente e em associação com o biomaterial formado por: Titânio + Poli Vinil Álcool + Ac. Hialurônico, nesse estudo denominado de TRIGEL (TRG). O Ac. Hialurônico (HA), por suas propriedades visco elásticas, o pó de Titânio (Ti), devido às suas propriedades biológicas únicas de ostoeintegração e o polímero Poli Vinil Álcool (PVA), com suas propriedades hidrofílicas, promovendo a formação do Hidrogel, os quais associados entre si formam um compósito, o TRG, que foi aplicado sobre uma lesão padrão no joelho da pata pélvica direita de ratos Wistar machos de seis meses de idade. Para a obtenção da lesão padrão, os animais foram divididos em três grupos de cincoanimais e cada grupo foi submetido a uma intervenção cirúrgica em seus joelhos direitos, utilizando três técnicas cirúrgicas diferentes, a saber: Grupo (I): Remoção cirúrgica dos meniscos medial e lateral mais perfuração do platô tibial seguido da aspiração da medula óssea através dessa perfuração por meio de seringa e agulha. Grupo (II): Remoção dos meniscos mais perfuração, sem aspiração, Grupo (III): Apenas a perfuração. Todos os animais foram autopsiados após 30 dias. Os joelhos dos quinze animais que constituíam os três grupos foram devidamente catalogados e enviados para a empresa Histotech, para a confecção das lâminas, tendo sido eleito, por análise histológica, o Grupo (I), por demonstrar menor reparo tecidual espontâneo. Em tese, o TRG teria as seguintes propriedades: Uma fonte de reparação tecidual (visco terapia) dada pelo HA e a capacidade amortecedora e carreadora de células-tronco do polímero PVA, que se hidrata, formando o hidrogel. O Ti, pela sua propriedade de osteointegração formaria um tampão sobre as áreas de matriz óssea exposta o que possibilitaria o afluxo de novos condrócitos, que também pode ocorrer pela ação das células-tronco. Livrar a superfície articular das áreas com exposição da matriz óssea é fundamental para o bloqueio das proteases que perpetuam a fisiopatologia da OA. Após tratamento estatístico dos diversos ensaios, utilizando-se os diversos biomateriais no tratamento da lesão, o TRG foi o biomaterial que apresentou o melhor resultado de força entre os grupos. No estudo histológico, foi evidenciada a presença de tecido cartilaginoso supra- lesional, o que só ocorreu nos animais dos grupos que receberam: apenas TRG, TRG associado com células-tronco e aquele que recebeu apenas MSCs. No entanto, mais estudos, com animais de maior porte e mais velhos, devem ser realizados para melhor analisar a segurança e o potencial terapêutico do compósito Trigel. / Osteoarthritis, or osteoarthritis (OA) is the third most debilitating disease in the world. In this study, we attempted to create an osteocartilaginous lesion in the knees of six months old male Wistar rats, aiming to constitute an animal model for the study of human OA and to use this model to evaluate the therapeutic potential of biomaterials, which are already well known for their biocompatibility properties in the clinical practice. The biomaterials were used in isolation or associated with each other and then evaluated for their biological safety and tissue repair capacity. Mesenchymal stem cells, obtained from human dental pulp from deciduous teeth (MSC) were evaluated alone and in association with the biomaterial formed by: Titanium + Poly Vinyl Alcohol + Ac. Hyaluronic, here called TRIGEL (TRG). Due to its visco-elastic properties, the Ti powder, due to its unique biological properties of ostointegration and the polymer PVA, with its hydrophylic properties, forming a hydrogel, were associated to form the composite named TRIGEL, (TRG), which was applied to a standard knee injury of the right hind leg of male Wistar rats. In order to elect the standard lesion, the animals were divided into three groups with five animals each and each group underwent a surgical intervention in their right knees, with three different surgical techniques being applied, namely: Group (1): Surgical removal ofmedial and lateral meniscus plus perforation of the tibial plateau, followed by aspiration of the bone marrow through this perforation using syringe and needle. Group (2): Removal of the meniscus plus perforation, without aspiration, Group (3): Drilling only. All groups were autopsied 30 days after the procedure and all groups were autopsied at 30 days post-procedure. The knees of the 15 animals that constituted the three groups were analyzed histologically and Group (1) (meniscus removed, perforated and aspirated), was elected as the standard lesion since it demonstrated less spontaneous tissue repair. TRG has the following properties: HA is used as a source of tissue repair (visco therapy) and hydration of the polymer; PVA, forms a hydrogel\", with damping action and as a stem cells carrier, whereas Ti was used due to its ósseo-integration, which would allow coating of the exposed bone matrix and this intra-osseous osteo-integration response would form an intercalating buffer. The healthy cartilage surfaces around this structural buffer would allow the reception of new chondrocytes or the action of the cells on TRG properties. Freeing the articular surface of the areas with bone matrix exposure is critical for blocking the proteases that perpetuate the pathophysiology of OA. In the various biomaterial tests in the treatment of the standard lesions, TRG was statistically shown to be the one that better mimicked the non-injured group. The histological study demonstrated the presence of a supra-lesional cartilagenous tissue, which only occurred in the groups which received: only TRG, mesenchymal stem cells associated with TRG and that which received only MSCs. However, further studies with larger and older animals should be pursued to better assess the safety and therapeutic potential of the Trigel composite.

O objetivo deste estudo foi avaliar por métodos microbiológicos e microscópia eletrônica de varredura a aderência bacteriana sobre superfície lisa e rugosa (modificada por irradiação a laser) de titânio comercialmente puro (\'Ti\' cp). Os corpos-de-prova eram em forma de discos (12,0 mm x 2,0 mm). Streptococcus mutans ATCC 25175 e Staphylococcus epidermidis ATCC 12228 RP 62A foram às bactérias selecionadas. A topografia das superfícies foram avaliadas por meio de microscópio eletrônico de varredura (MEV). As medidas do ângulo de contato permitiram conhecer a molhabilidade (hidrofobicidade) das superfícies. Os discos de \'Ti\' cp foram incubados em meio de cultura caldo Mueller Hinton inoculado com suspensão bacteriana da ordem de \'10 POT.8\' (UFC)/mL, durante 1, 6, 24, 48 e 72 horas. A cada intervalo de tempo, os discos foram retirados, lavados em solução salina fisiológica e após este procedimento foram colocados em novos tubos contendo 5,0 mL de solução salina fisiológica esterilizada e submetidos ao banho ultrassônico de 40 kHz por oito minutos. A seguir, da suspensão bacteriana resultante foram realizadas diluições seriadas (\'10 POT.-1\'-\'10 POT.-6\'), semeadas em ágar Mueller Hinton e as placas incubadas em estufa bacteriológica a 37 graus Celsius para aguardar o desenvolvimento bacteriano. As colônias crescidas foram contadas, enumeradas e o valor expresso em UFC/mL para cada diluição. Os discos removidos do banho ultrassônico foram preparados para observação por MEV. A medida do ângulo de contato foi realizada em equipamento denominado goniômetro. O resultado da avaliação da viabilidade das células de biofilme de S. mutans sobre superfície lisa em média foi de 1,66 \'+ OU -\' 1,67 x \'10 POT.6\' e sobre superfície rugosa 1,06 \'+ OU -\' 1,07 x \'10 POT.6\' a nível 0,05 as médias não são significantemente diferentes. Em média as células viáveis do biofilme de S. epidermidis sobre superfície lisa foram de 6,68 \'+ OU -\' ) 5,83 x \'10 POT.6\' a nível 0,05 as médias não são significativamente diferentes. As células viáveis do biofilme de S. epidermidis, recuperadas em vários intervalos de tempo (1, 6, 24, 48 e 72h) da superfície rugosa 7,16 \'+ OU -\' 2,34 x \'10 POT.6\' a nível 0,05 são significantemente diferentes. Em relação à molhabilidade a superfície lisa é hidrofóbica, com um ângulo de 75 graus e a superfície rugosa hidrofílica, com um ângulo < 7 graus. Apesar da superfície lisa ser hidrofóbica e a superfície rugosa hidrofílica ambas as superfícies permitiram a aderência bacteriana e formação de biofilme, fato comprovado por MEV e por cultura. Comparando-se as superfícies lisa e rugosa - modificada por meio físico (aplicação de feixe de laser de alta intensidade \'Nd\':YAG) não foi observada redução significante no número de bactérias aderidas à superfície rugosa, o que permite concluir que a modificação de superfície por laser de alta intensidade cria superfície favorável para aderência de S. mutans e S. epidermidis, sem reduzir a aderência bacteriana, o que pode ser fator de risco para adquirir infecção. / The objective of this study was assessed by microbiological methods and the scanning electron microscope on bacterial adhesion to smooth and rough (modified by laser irradiation) of commercially pure titanium (\'Ti\' cp). The bodies-of-proof was in the form of discs (12,0 mm x 2,0 mm). Streptococcus mutans ATCC 25175 and Staphylococcus epidermidis ATCC 12228 RP62A were selected bacteria. The topography of the areas were evaluated by scanning electron microscope (SEM). Measures the angle of contact allowed to know the wettability (hydrophobicity) of the areas. Of \'Ti\' cp discs were incubated in culture media Mueller Hinton broth inoculated with bacterial suspension of approximately \'10 POT.8\' (CFU)/mL, for 1, 6, 24, 48 and 72 hours. Each time, the discs were removed, washed in saline solution and after this procedure were placed into new tubes containing 5.0 mL of sterile saline solution and submitted to the ultrasonic bath for eight minutes of 40 kHz. Then, the resulting bacterial suspension were serially diluted (\'10 POT.-1\'-\'10 POT.-6\'), grown in Mueller Hinton agar plates and incubated in bacteriological incubator at 37 Celsius degrees to await the development blight. The grown colonies were counted, listed and the value expressed in CFU/mL for each dilution. Discs removed from the ultrasonic bath were prepared for observation by SEM. The measure of the angle of contact was made in equipment called goniometer. The result of evaluating the viability biofilm cells of S. mutans on smooth surface was on average of 1,66 \'+ OU -\' 1,67 x \'10 POT.6\' at the 0,05 and on area rugosa 1,06 \'+ OU -\' 1,07 x \'10 POT.6\' at the 0,05 average is not significantly different. On average the cells of the biofilm of S. epidermidis on smooth 6,68 \'+ OU -\' 5,83 x \'10 POT.6\' at the 0,05 average is not significantly surface were different. The cells of the biofilm of S. epidermidis, recovered at various at intervals of time (1, 6, 24, 48 and 72h) of the area rugosa 7,16 \'+ OU -\' 2,34 x \'10 POT.6\' 0,05 are significantly different. In relation to the smooth surface wettability is hydrophobic, with an angle of 75 degrees and the hydrophilic surface rough, with an angle < 7 degrees. Despite the smooth surface is rough hydrophobic and hydrophilic surface areas have both the adhesion and formation of bacterial biofilm, a fact evidenced by SEM and by culture. Comparing the smooth and rough surfaces - modified by the physical environment (application of the laser beam of high intensity \'Nd\': YAG) was not observed a significant reduction in the number of bacteria adhered to the surface rough, which indicates that the modification of surface by high-intensity laser creates favorable surface for adhesion of S. mutans and S. epidermidis, without reducing the bacterial adhesion, which may be a risk factor for acquiring infection.

A artrose, também chamada de osteoartrose ou osteoartrite (OA), é a terceira doença de maior incidência no Mundo. Nesse trabalho, buscou-se criar uma lesão osteocartilaginosa em joelhos de ratos Wistar machos com seis meses de vida, objetivando constituir um modelo animal para estudo da OA humana e, a partir desse modelo, avaliar biomateriais de forma isolada ou associados entre si e avaliados quanto à sua segurança biológica e potencial de reparação tecidual. Além disto, foi analisado o efeito reparador de células-tronco mesenquimais da polpa do dente de leite humano (MSC) isoladamente e em associação com o biomaterial formado por: Titânio + Poli Vinil Álcool + Ac. Hialurônico, nesse estudo denominado de TRIGEL (TRG). O Ac. Hialurônico (HA), por suas propriedades visco elásticas, o pó de Titânio (Ti), devido às suas propriedades biológicas únicas de ostoeintegração e o polímero Poli Vinil Álcool (PVA), com suas propriedades hidrofílicas, promovendo a formação do Hidrogel, os quais associados entre si formam um compósito, o TRG, que foi aplicado sobre uma lesão padrão no joelho da pata pélvica direita de ratos Wistar machos de seis meses de idade. Para a obtenção da lesão padrão, os animais foram divididos em três grupos de cincoanimais e cada grupo foi submetido a uma intervenção cirúrgica em seus joelhos direitos, utilizando três técnicas cirúrgicas diferentes, a saber: Grupo (I): Remoção cirúrgica dos meniscos medial e lateral mais perfuração do platô tibial seguido da aspiração da medula óssea através dessa perfuração por meio de seringa e agulha. Grupo (II): Remoção dos meniscos mais perfuração, sem aspiração, Grupo (III): Apenas a perfuração. Todos os animais foram autopsiados após 30 dias. Os joelhos dos quinze animais que constituíam os três grupos foram devidamente catalogados e enviados para a empresa Histotech, para a confecção das lâminas, tendo sido eleito, por análise histológica, o Grupo (I), por demonstrar menor reparo tecidual espontâneo. Em tese, o TRG teria as seguintes propriedades: Uma fonte de reparação tecidual (visco terapia) dada pelo HA e a capacidade amortecedora e carreadora de células-tronco do polímero PVA, que se hidrata, formando o hidrogel. O Ti, pela sua propriedade de osteointegração formaria um tampão sobre as áreas de matriz óssea exposta o que possibilitaria o afluxo de novos condrócitos, que também pode ocorrer pela ação das células-tronco. Livrar a superfície articular das áreas com exposição da matriz óssea é fundamental para o bloqueio das proteases que perpetuam a fisiopatologia da OA. Após tratamento estatístico dos diversos ensaios, utilizando-se os diversos biomateriais no tratamento da lesão, o TRG foi o biomaterial que apresentou o melhor resultado de força entre os grupos. No estudo histológico, foi evidenciada a presença de tecido cartilaginoso supra- lesional, o que só ocorreu nos animais dos grupos que receberam: apenas TRG, TRG associado com células-tronco e aquele que recebeu apenas MSCs. No entanto, mais estudos, com animais de maior porte e mais velhos, devem ser realizados para melhor analisar a segurança e o potencial terapêutico do compósito Trigel. / Osteoarthritis, or osteoarthritis (OA) is the third most debilitating disease in the world. In this study, we attempted to create an osteocartilaginous lesion in the knees of six months old male Wistar rats, aiming to constitute an animal model for the study of human OA and to use this model to evaluate the therapeutic potential of biomaterials, which are already well known for their biocompatibility properties in the clinical practice. The biomaterials were used in isolation or associated with each other and then evaluated for their biological safety and tissue repair capacity. Mesenchymal stem cells, obtained from human dental pulp from deciduous teeth (MSC) were evaluated alone and in association with the biomaterial formed by: Titanium + Poly Vinyl Alcohol + Ac. Hyaluronic, here called TRIGEL (TRG). Due to its visco-elastic properties, the Ti powder, due to its unique biological properties of ostointegration and the polymer PVA, with its hydrophylic properties, forming a hydrogel, were associated to form the composite named TRIGEL, (TRG), which was applied to a standard knee injury of the right hind leg of male Wistar rats. In order to elect the standard lesion, the animals were divided into three groups with five animals each and each group underwent a surgical intervention in their right knees, with three different surgical techniques being applied, namely: Group (1): Surgical removal ofmedial and lateral meniscus plus perforation of the tibial plateau, followed by aspiration of the bone marrow through this perforation using syringe and needle. Group (2): Removal of the meniscus plus perforation, without aspiration, Group (3): Drilling only. All groups were autopsied 30 days after the procedure and all groups were autopsied at 30 days post-procedure. The knees of the 15 animals that constituted the three groups were analyzed histologically and Group (1) (meniscus removed, perforated and aspirated), was elected as the standard lesion since it demonstrated less spontaneous tissue repair. TRG has the following properties: HA is used as a source of tissue repair (visco therapy) and hydration of the polymer; PVA, forms a hydrogel\", with damping action and as a stem cells carrier, whereas Ti was used due to its ósseo-integration, which would allow coating of the exposed bone matrix and this intra-osseous osteo-integration response would form an intercalating buffer. The healthy cartilage surfaces around this structural buffer would allow the reception of new chondrocytes or the action of the cells on TRG properties. Freeing the articular surface of the areas with bone matrix exposure is critical for blocking the proteases that perpetuate the pathophysiology of OA. In the various biomaterial tests in the treatment of the standard lesions, TRG was statistically shown to be the one that better mimicked the non-injured group. The histological study demonstrated the presence of a supra-lesional cartilagenous tissue, which only occurred in the groups which received: only TRG, mesenchymal stem cells associated with TRG and that which received only MSCs. However, further studies with larger and older animals should be pursued to better assess the safety and therapeutic potential of the Trigel composite.

O objetivo deste estudo foi avaliar por métodos microbiológicos e microscópia eletrônica de varredura a aderência bacteriana sobre superfície lisa e rugosa (modificada por irradiação a laser) de titânio comercialmente puro (\'Ti\' cp). Os corpos-de-prova eram em forma de discos (12,0 mm x 2,0 mm). Streptococcus mutans ATCC 25175 e Staphylococcus epidermidis ATCC 12228 RP 62A foram às bactérias selecionadas. A topografia das superfícies foram avaliadas por meio de microscópio eletrônico de varredura (MEV). As medidas do ângulo de contato permitiram conhecer a molhabilidade (hidrofobicidade) das superfícies. Os discos de \'Ti\' cp foram incubados em meio de cultura caldo Mueller Hinton inoculado com suspensão bacteriana da ordem de \'10 POT.8\' (UFC)/mL, durante 1, 6, 24, 48 e 72 horas. A cada intervalo de tempo, os discos foram retirados, lavados em solução salina fisiológica e após este procedimento foram colocados em novos tubos contendo 5,0 mL de solução salina fisiológica esterilizada e submetidos ao banho ultrassônico de 40 kHz por oito minutos. A seguir, da suspensão bacteriana resultante foram realizadas diluições seriadas (\'10 POT.-1\'-\'10 POT.-6\'), semeadas em ágar Mueller Hinton e as placas incubadas em estufa bacteriológica a 37 graus Celsius para aguardar o desenvolvimento bacteriano. As colônias crescidas foram contadas, enumeradas e o valor expresso em UFC/mL para cada diluição. Os discos removidos do banho ultrassônico foram preparados para observação por MEV. A medida do ângulo de contato foi realizada em equipamento denominado goniômetro. O resultado da avaliação da viabilidade das células de biofilme de S. mutans sobre superfície lisa em média foi de 1,66 \'+ OU -\' 1,67 x \'10 POT.6\' e sobre superfície rugosa 1,06 \'+ OU -\' 1,07 x \'10 POT.6\' a nível 0,05 as médias não são significantemente diferentes. Em média as células viáveis do biofilme de S. epidermidis sobre superfície lisa foram de 6,68 \'+ OU -\' ) 5,83 x \'10 POT.6\' a nível 0,05 as médias não são significativamente diferentes. As células viáveis do biofilme de S. epidermidis, recuperadas em vários intervalos de tempo (1, 6, 24, 48 e 72h) da superfície rugosa 7,16 \'+ OU -\' 2,34 x \'10 POT.6\' a nível 0,05 são significantemente diferentes. Em relação à molhabilidade a superfície lisa é hidrofóbica, com um ângulo de 75 graus e a superfície rugosa hidrofílica, com um ângulo < 7 graus. Apesar da superfície lisa ser hidrofóbica e a superfície rugosa hidrofílica ambas as superfícies permitiram a aderência bacteriana e formação de biofilme, fato comprovado por MEV e por cultura. Comparando-se as superfícies lisa e rugosa - modificada por meio físico (aplicação de feixe de laser de alta intensidade \'Nd\':YAG) não foi observada redução significante no número de bactérias aderidas à superfície rugosa, o que permite concluir que a modificação de superfície por laser de alta intensidade cria superfície favorável para aderência de S. mutans e S. epidermidis, sem reduzir a aderência bacteriana, o que pode ser fator de risco para adquirir infecção. / The objective of this study was assessed by microbiological methods and the scanning electron microscope on bacterial adhesion to smooth and rough (modified by laser irradiation) of commercially pure titanium (\'Ti\' cp). The bodies-of-proof was in the form of discs (12,0 mm x 2,0 mm). Streptococcus mutans ATCC 25175 and Staphylococcus epidermidis ATCC 12228 RP62A were selected bacteria. The topography of the areas were evaluated by scanning electron microscope (SEM). Measures the angle of contact allowed to know the wettability (hydrophobicity) of the areas. Of \'Ti\' cp discs were incubated in culture media Mueller Hinton broth inoculated with bacterial suspension of approximately \'10 POT.8\' (CFU)/mL, for 1, 6, 24, 48 and 72 hours. Each time, the discs were removed, washed in saline solution and after this procedure were placed into new tubes containing 5.0 mL of sterile saline solution and submitted to the ultrasonic bath for eight minutes of 40 kHz. Then, the resulting bacterial suspension were serially diluted (\'10 POT.-1\'-\'10 POT.-6\'), grown in Mueller Hinton agar plates and incubated in bacteriological incubator at 37 Celsius degrees to await the development blight. The grown colonies were counted, listed and the value expressed in CFU/mL for each dilution. Discs removed from the ultrasonic bath were prepared for observation by SEM. The measure of the angle of contact was made in equipment called goniometer. The result of evaluating the viability biofilm cells of S. mutans on smooth surface was on average of 1,66 \'+ OU -\' 1,67 x \'10 POT.6\' at the 0,05 and on area rugosa 1,06 \'+ OU -\' 1,07 x \'10 POT.6\' at the 0,05 average is not significantly different. On average the cells of the biofilm of S. epidermidis on smooth 6,68 \'+ OU -\' 5,83 x \'10 POT.6\' at the 0,05 average is not significantly surface were different. The cells of the biofilm of S. epidermidis, recovered at various at intervals of time (1, 6, 24, 48 and 72h) of the area rugosa 7,16 \'+ OU -\' 2,34 x \'10 POT.6\' 0,05 are significantly different. In relation to the smooth surface wettability is hydrophobic, with an angle of 75 degrees and the hydrophilic surface rough, with an angle < 7 degrees. Despite the smooth surface is rough hydrophobic and hydrophilic surface areas have both the adhesion and formation of bacterial biofilm, a fact evidenced by SEM and by culture. Comparing the smooth and rough surfaces - modified by the physical environment (application of the laser beam of high intensity \'Nd\': YAG) was not observed a significant reduction in the number of bacteria adhered to the surface rough, which indicates that the modification of surface by high-intensity laser creates favorable surface for adhesion of S. mutans and S. epidermidis, without reducing the bacterial adhesion, which may be a risk factor for acquiring infection.