Not available / text

In the last decades, population growth has been outpacing transportation infrastructure growth, and today's transportation professionals are challenged to meet the mobility needs of an increasing population. The effectiveness of the transportation system is an essential constituent of people's daily lives as they commute between different points of interest. Studies show that at many highway junctions, congestion continues to worsen, and drivers are experiencing greater delays and higher risk exposures. Engineers have very little resources to handle this increase in population. One solution to resolve and alleviate congestion due to increasing traffic volumes and travel demands relies in implementing alternative designs. This approach will help traffic engineers determine which design will be the most appropriate for a particular location. This study compares and evaluates the Diverging Diamond Interchange (DDI), which is an unconventional design, to Partial Cloverleaf (ParClo) types A4 and B4 interchange designs by evaluating different Measure of Effectiveness (MOEs). Using microsimulation platform AIMSUN, each interchange type was evaluated for low, medium and high traffic flows. The analysis revealed that the DDI with four through lanes performed better than the ParClo A4 for unbalanced conditions, the DDI with six though lanes had similar results as the ParClo B4 for very high volumes. In terms of queue, the DDI design had a much better performance. The results from the analysis help in providing guidelines to the decision makers for selecting the best alternative in terms of performance. / by Borja Galletebeitia. / Thesis (M.S.C.S.)--Florida Atlantic University, 2011. / Includes bibliography. / Electronic reproduction. Boca Raton, Fla., 2011. Mode of access: World Wide Web.

Highway Capacity Manual (HCM) 2010 methodology for freeway operations contain procedures for calculating traffic performance measures both for undersaturated and oversaturated flow conditions. However, one of the limitations regarding oversaturated freeway weaving segments is that the HCM procedures have not been extensively calibrated based on field observations on U.S. freeways. This study validates the HCM2010 methodology for oversaturated freeway weaving segment by comparing space mean speed and density obtained from HCM procedure to those generated by a microsimulation model. A VISSIM model is extensively calibrated and validated based on NGSIM field data for the US 101 Highway. Abundance of the NGSIM data is utilized to calibrate and validate the VISSIM model. Results show that HCM methodology has significant limitations and while in some cases it can reproduce density correctly, the study finds that speeds estimated by the HCM methodology significantly differ from those observed in the field. / by Dusan Jolovic. / Thesis (M.S.C.S.)--Florida Atlantic University, 2012. / Includes bibliography. / Electronic reproduction. Boca Raton, Fla., 2012. Mode of access: World Wide Web.