Thesis (MS)--Montana State University--Bozeman, 2009. / Typescript. Chairperson, Graduate Committee: Ahmed Al-Kaisy. Includes bibliographical references (leaves 83-85).

This thesis focuses on shared use lane facilities and road user understanding. Shared use lanes (sharrows) are a common solution for road facilities that are too narrow to accommodate a full bicycle lane and where the local jurisdiction wants to reduce dooring crashes. In recent years, engineers have focused on incorporating sustainable transportation into new or reconstructed infrastructure improvements. Bicycle transportation connectivity, as an example, is essential to efficient bicycle commuting. Sharrows pavement marking is a well-engineered design but without education road users do not use it properly resulting in an increased risk of being in a crash. / Graduation date: 2012

A before and after comparison of vehicle occupancy distributions for the Atlanta, GA I-85 HOV to High Occupancy Toll (HOT) lane conversion scheduled for summer 2011, will assess the changes in vehicle and passenger throughput associated with lane conversion. The field deployment plans and data collection methodologies developed for the HOT evaluation were the result of a comprehensive literature review, an examination of previous data collection methods, an evaluation of the physical characteristics of the I-85 corridor, and the testing of a variety of equipment/manpower strategies. The case study in this thesis evaluates the established vehicle occupancy methodology for consistency across multiple observers during parallel data collection efforts. The differences noted in exact matches and consistency across the use of the "uncertain" values developed for field implementation is specifically assessed. Results from this study are the first step in assessing the validity of the data collection methods used on the HOT corridor and will yield recommendations for improving the methodology for future occupancy studies. A separate assessment of the accuracy of the methodology is also being conducted by the research team and will be published under a separate cover.

The conversion of high-occupancy vehicle (HOV) lanes to high-occupancy toll (HOT) lanes is currently being implemented in metro Atlanta on a demonstration basis and is under consideration for more widespread adoption throughout the metro region. Further conversion of HOV lanes to HOT lanes is a major policy decision that depends on knowledge of the likely impacts, including the equity of the new HOT lane. Rather than estimating these impacts using modeling or surveys, this study collects revealed preference data in the form of observed vehicle license plate data and vehicle occupancy data from users of the HOV corridor. Building on a methodology created in Spring 2011, researchers created a new methodology for matching license plate data to vehicle occupancy data that required extensive post-processing of the data. The new methodology also presented an opportunity to take an in-depth look at errors in both occupancy and license plate data (in terms of data collection efforts, processing, and the vehicle registration database). Characteristics of individual vehicles were determined from vehicle registration records associated with the license plate data collected during AM and PM peak periods immediately prior to the HOV lanes conversion to HOT lanes. More than 70,000 individual vehicle license plates were collected for analysis, and over 3,500 records are matched to occupancy values. Analysis of these data have shown that government and commercial vehicle were more prevalent in the HOV lane, while hybrid and alternative fuel vehicles were much less common in either lane than expected. Vehicle occupancy data from the first four quarters of data collection were used to create the distribution of occupancy on the HOV and general purpose lane, and then the matched occupancy and license plate data were examined. A sensitivity analysis of the occupancy data established that the current use of uncertain occupancy values is acceptable and that bus and vanpool occupancy should be considered when determining the average occupancy of all vehicles on the HOV lane. Using a bootstrap analysis, vehicle values were compared to vehicle occupancy values and the results found that there is no correlation between vehicle value and vehicle occupancy. A conclusions section suggests possible impacts of the findings on policy decisions as Georgia considers expanding the HOT network. Further research using these data, and additional data that will be collected after the HOT lane opens, will include emissions modeling and a study of changes in vehicle characteristics associated with the HOT lane conversion.

As bicycle transportation has increased, especially among commuters, so have the types of bicycle infrastructure facilities increased. This report focuses on the application of several of these innovative bicycle infrastructure treatments in three different scenarios: shared-lane facilities, bicycle-specific facilities, and high-conflict area treatments. The focus treatments include the sharrow, Sharrow Bicycle Priority Lane, Green Bicycle Priority Lane, Bicycles May Use Full Lane sign, green bike lane, bike-box, green lane in a conflict area, and elephant's footprint markings. The goal of this report is to gather how well bicyclists understand their meaning, how they would use each, and which treatments are most preferred among bicyclists. Data for this study was gathered in the form of an online survey administered to 1000 bicyclists of varying levels and purposes from different regions of the country. The survey gathers general rider characteristics, asks how each bicyclist would use each treatment in different traffic speed and volume scenarios, and finally each respondent rates each of the treatments in order of preference. Using the survey results, the effectiveness of each treatment is analyzed in detail by different population segments of those surveyed. Bicyclist riding characteristics and route choice factors are also examined in detail to better understand the sampled population of riders. The results are discussed and conclusions to the effectiveness of each treatment are made.

The objective of this dissertation is to develop a Multi-Camera Lane Departure Warning (MCLDW) system and a framework to evaluate it. A Lane Departure Warning (LDW) system is a safety feature that is included in a few luxury automobiles. Using a single camera, it performs the task of informing the driver if a lane change is imminent. The core component of an LDW system is a lane detector, whose objective is to find lane markers on the road. Therefore, we start this dissertation by explaining the requirements of an ideal lane detector, and then present several algorithmic implementations that meet these requirements. After selecting the best implementation, we present the MCLDW methodology. Using a multi-camera setup, MCLDW system combines the detected lane marker information from each camera's view to estimate the immediate distance between the vehicle and the lane marker, and signals a warning if this distance is under a certain threshold. Next, we introduce a procedure to create ground truth and a database of videos which serve as the framework for evaluation. Ground truth is created using an efficient procedure called Time-Slicing that allows the user to quickly annotate the true locations of the lane markers in each frame of the videos. Subsequently, we describe the details of a database of driving videos that has been put together to help establish a benchmark for evaluating existing lane detectors and LDW systems. Finally, we conclude the dissertation by citing the contributions of the research and discussing the avenues for future work.

The dissertation deals with application of simulated swept paths of vehicles to road designs. Using software which generates simulated swept paths makes new demands on the designer, but Czech regulations do not stipulate the appropriate method of applying swept paths. The theoretical part of the dissertation analyses the theory of how a vehicle moves when passing through a horizontal road curve and a method of calculating a necessary extent of widening the road. The practical part compares swept paths generated by various software programs and differences between them. In order to verify the shapes and dimensions of the swept paths generated, the swept path of a real vehicle was measured. This swept path was then compared with the one generated, and the differences between them were evaluated. One of the software programs was chosen as a reference program, and its output was applied to a road design pursuant to valid regulations. The results obtained within the dissertation were used to develop certified methodology titled: „Methodology of widening road lanes in horizontal curves and of application of vehicles’ swept paths “.

Dissertation describes new methodology of design turbo-roundabouts in Czech Republic. Especially innovative is approach to the design of traffic lanes with regards to standard vehicles and widening of traffic lanes according to their dimensions. Innovative is also approach to road signs, where details of current signs are modified, however, these details are important for drivers’ better understanding while driving through turbo-roundabouts. Dissertation fills legislative, but also technical, blank spot during turbo-roundabouts design and I believe that it will benefit particularly designers of these intersections.

This master´s thesis deals with depiction aplication of camera like sensitive element for assisting system of car. It was proposed, how find a road, a lane and a obstacle on roadways. Only one camera was aplication for it. Solution is realized by methods, that are based on color and gradient of image. It applies simple methods and methods with mathematical model. Result is sum of method and its test and comparing. Realization of my program is present at resume of this thesis.