Spelling suggestions: "subject:"antransmission,"" "subject:"entransmission,""
101 |
Speech signal distortion in single-sideband radio channels due to intermodulationHallak, A. G. January 1983 (has links)
No description available.
|
102 |
Planar transmission line analyses using the Method of LinesKeen, Alan G. January 1991 (has links)
No description available.
|
103 |
Studies of the transmission properties of waveguide dichroic surfacesLangsford, P. E. January 1982 (has links)
No description available.
|
104 |
Reduction of spinning reserve requirements on the Northern Ireland electrical power networkMcIlwaine, Stephen Andrew January 1987 (has links)
No description available.
|
105 |
Transmission line matrix modelling for semiconductor transportChakrabarti, Abhimanyu January 1996 (has links)
No description available.
|
106 |
The miraculous and French society, 950-1100Morison, P. R. January 1983 (has links)
No description available.
|
107 |
Techniques for power system simulation using multiple processorsTaylor, Alistair James Eden January 1990 (has links)
The thesis describes development work which was undertaken to improve the speed of a real-time power system simulator used for the development and testing of control schemes. The solution of large, highly sparse matrices was targeted because this is the most time-consuming part of the current simulator. Major improvements in the speed of the matrix ordering phase of the solution were achieved through the development of a new ordering strategy. This was thoroughly investigated, and is shown to provide important additional improvements compared to standard ordering methods, in reducing path length and minimising potential pipeline stalls. Alterations were made to the remainder of the solution process which provided more flexibility in scheduling calculations. This was used to dramatically ease the run-time generation of efficient code, dedicated to the solution of one matrix structure, and also to reduce memory requirements. A survey of the available microprocessors was performed, which concluded that a special-purpose design could best implement the code generated at run-time, and a design was produced using a microprogrammable floating-point processor, which matched the code produced by the earlier work. A method of splitting the matrix solution onto parallel processors was investigated, and two methods of producing network splits were developed and their results compared. The best results from each method were found to agree well, with a predicted three-fold speed-up for the matrix solution of the C.E.G.B. transmission system from the use of six processors. This gain will increase for the whole simulator. A parallel processing topology of the partitioned network and produce the necessary structures for the remainder of the solution process.
|
108 |
Mathematical modelling of the optimal power dispatch problemAli, Habib K. January 1990 (has links)
This thesis is concerned with the optimum operating conditions in a power system. The various aspects of the problem are modelled and solved as a number of optimization problems applying linear programming techniques. A generalized linear mathematical model has been developed for this purpose. A two-stage formulation is adopted to represent the various problems considered. In each case one power system quantity is chosen as an objective function to be optimized under a number of constraints and operating limits relating to the power system relationships and upper and lower bounds on the variables. These include constraints derived from the power flow equations and transmission network capacity. Limits are also imposed on bus voltage magnitudes and generator outputs. With the appropriate selection of the combination of objective function and constraints, the model can be used to minimize the overall generation cost, the total system losses or the total reactive power generation. The two-stage modelling of the problem also allows optimizing two different objective functions at the same time. Two such combinations are possible. In one case the total system losses can be minimized in the first stage and the generation cost minimized in the second stage. The other combination minimizes the total system reactive power output and the active power generation cost. Using the same model, the problem is then solved using decomposition techniques. These imply breaking up the original problem into a number of smaller problems that can be solved almost independently. The mathematical model has been developed in general terms and the associated computer program is written for a general power system. A sample system of medium size has been used to test the validity of the various aspects of the suggested model and produce numerical results.
|
109 |
Transient analysis of cable systems including the effects of non-linear protective devicesUnver, U. January 1979 (has links)
No description available.
|
110 |
Insulation co-ordination in HVDC transmissionEl-Batal, S. January 1972 (has links)
No description available.
|
Page generated in 0.0591 seconds