The diploma thesis, which belongs to the area of vehicle dynamics, deals with the issue of suspension of trucks cabins. In particular, it focuses on the suspension of a race truck cab such as the Rally Dakar. Includes an overview of truck suspension (especially cabs), driving comfort assessment methods and the impact of vibration on human. To verify the suitability of using different cab suspension concepts, a multibody model was built in program MSC ADAMS. Suitable primary suspension has been found appropriate for this model. Cab suspension was tested for driving safety, but first for driving comfort.

Truck drivers are exposed to vibrations all day as a part of their work. In addition to repetitive motion injuries the constant vibrations add to the fatigue of the driver which in turn can have safety implications. The goal of this research is to lower the vibrations an occupant of a class 8 semitruck cab sleeper is exposed to by improving the ride quality. Unlike prior research in the area of ride comfort that target the chassis or seat suspension, this work focuses on the cab suspension. The current standard in cab suspensions is comprised of some type of spring and passive damper mechanism. Ride improvements can most easily be accomplished by replacing the stock passive dampers with some type of controllable damper; in this case Magneto-Rheological (MR) dampers. MR dampers can change damping characteristics in real time, while behaving like a passive damper in their OFF state. This means that in case of a failure to the power supply, the dampers still retain their functionality and can provide some level of damping. Additionally, MR dampers can be packaged such that they do not require any redesign of mounting bracketry on the cab or the frame, their use as a retrofitable device. The damper controller is based on the skyhook control policy pioneered by Karnopp et al. in the 1970s. A variation on skyhook control is chosen called no-jerk skyhook control. A controller called Hierarchical SemiActive Control (HSAC) is designed and implemented to allow the no-jerk skyhook controller to adapt to the road conditions. It also incorporates an endstop controller to better handle the limited rattle space of the cab suspension. The development and initial testing of the controller prototype is done in simulation using a model of the cab and its suspension. The model is derived from first principles using bond graph modeling. The controller is implemented in Simulink to ease the transition to hardware testing. The realtime prototype controller is tested on a class 8 semitruck in a lab environment using dSPACE and road input at the rear axles. The laboratory results are veried on the road in a series of road tests on a test truck. The road tests showed a need for HSAC controller. The HSAC is implemented on the test truck in a final prototype system. The test results with this system show signfiicant improvements over the stock passive suspension, especially when dealing with transient excitations. The overall research results presented show that significant ride improvements can be achieved from a semiactive cab suspension. / Ph. D.