With growing awareness of climate change and an increased interest in renewable energy, resources like offshore wind are projected to grow in the near future. One key issue within offshore wind is how to stabilize the floating system when it experiences large wind and wave forces that impact its performance and shorten its operating life. Researchers have been exploring structural control methods and creating modeling tools to evaluate the performance of the control methods. One such tool is OpenFAST, the industry standard for modeling wind turbine dynamics, and the goal of this paper is to build upon the existing capabilities of OpenFAST. Inerter-based structural control methods offer arguably better performance than traditional vibration absorbers, and the configuration proposed in this paper also offers the ability to use a generator as an element in the structural controller. This allows extra energy to be generated along with the improvement in vibration absorption. Through this study, this inerter-based control method is explored through the lens of an established modeling tool to provide the validation for the model to explore which load cases the inerter performs best in and what design considerations must be made. In addition, the energy harvesting potential of the inerter system is evaluated and shown to increase the system's capabilities especially under stormy ocean conditions. / Master of Science / With growing awareness of climate change and an increased interest in renewable energy, resources like offshore wind are projected to grow in the near future. One key issue within offshore wind is how to stabilize the floating system when it experiences large wind and wave forces which impact its performance and shorten its lifespan. Researchers have been exploring several methods and creating modeling tools to evaluate the performance of control methods. One such tool is OpenFAST, the industry standard for modeling wind turbine dynamics, and the goal of this paper is to build upon the existing capabilities of OpenFAST. Structural control methods based on an element called an inerter offer arguably better performance than traditional vibration absorbers. The design in this paper also offers the ability to use an electrical generator as an element in the structural controller. This allows extra energy to be generated along with the reduced vibrations. Through this study, this inerter-based control method is explored through the lens of an established modeling tool to provide validation for the model. Another goal is to explore which scenarios the inerter performs best and what design considerations must be made for future development. In addition, the energy harvesting potential of the inerter system is evaluated and shown to increase the system's capabilities.

Over the past decade, offshore wind has positioned itself as one of the most promising renewable energy markets. While this field is currently dominated by fixed-bottom wind turbines located within a limited depth range, floating turbines are showing promise as a way to capture the more developed wind profiles available in deeper waters. Currently, the main challenge with floating offshore wind is that the systems experience larger ultimate loads compared to fixed bottom turbines. These larger loads are caused by the increased motion inherent with floating structures. This study looks to analyze the effects that traditional and inerter based structural control methods can have on vibration reduction of floating offshore wind turbines. Models are developed adding tuned mass dampers (TMD) and tuned inerter dampers (TID) into the three main columns of a semisubmersible platform. Results showed that for free decay tests, heave and pitch root mean square (RMS) values were reduced significantly by the addition of passive structural control. The inerter based structural control consistently outperformed traditional TMD and also allowed for similar performance with significantly reduced physical mass values. For regular wave excitation both control methods resulted in significant reductions to the heave and pitch RMS values compared to the baseline, with the TID outperforming the TMD . And for an irregular wave analysis, it was found that both control configurations were still able to provide meaningful reductions to the baseline model. / Master of Science / Over the past decade, offshore wind has positioned itself as one of the most promising renewable energy markets. While this field is currently dominated by fixed-bottom wind turbines located within a limited depth range, floating turbines are showing promise as a way to capture the more developed wind profiles available in deeper waters. Currently, the main challenge with floating offshore wind is that the systems experience larger ultimate loads compared to fixed bottom turbines. These larger loads are caused by the increased motion inherent with floating structures. This study looks to analyze the effects that traditional and enhanced motion reduction technology can have on floating offshore wind turbines. Models are developed adding the traditional and enhanced motion reduction technology into the three main columns of a semisubmersible platform. Results showed that for several different tests, the motion reduction technology has a positive effect on the turbines. For test dropping the system from a set height, the motion reduction technology allowed the system to come to rest much faster. Moreover, the enhanced technology performed better than the traditional technology. The same results were found when the system was excited by simulated waves.