by Shaun Hurley. / Thesis (M.S.C.S.)--Florida Atlantic University, 2011. / Includes bibliography. / Electronic reproduction. Boca Raton, Fla., 2011. Mode of access: World Wide Web. / The study presents a reliability-based fatigue life prediction model for the ocean current turbine rotor blades. The numerically simulated bending moment ranges based on the measured current velocities off the Southeast coast line of Florida over a one month period are used to reflect the short-term distribution of the bending moment ranges for an idealized marine current turbine rotor blade. The 2-parameter Weibull distribution is used to fit the short-term distribution and then used to obtain the long-term distribution over the design life. The long-term distribution is then used to determine the number of cycles for any given bending moment range. The published laboratory test data in the form of an ε-N curve is used in conjunction with the long-term distribution of the bending moment ranges in the prediction of the fatigue failure of the rotor blade using Miner's rule. The first-order reliability method is used in order to determine the reliability index for a given section modulus over a given design life. The results of reliability analysis are then used to calibrate the partial safety factors for load and resistance.

The success of harnessing energy from ocean current will require a reliable structural design of turbine blade that is used for energy extraction. In this study we are particularly focusing on the fatigue life of a 3m length ocean current turbine blade. The blade consists of sandwich construction having polymeric foam as core, and carbon/epoxy as face sheet. Repetitive loads (Fatigue) on the blade have been formulated from the randomness of the ocean current associated with turbulence and also from velocity shear. These varying forces will cause a cyclic variation of bending and shear stresses subjecting to the blade to fatigue. Rainflow Counting algorithm has been used to count the number of cycles within a specific mean and amplitude that will act on the blade from random loading data. Finite Element code ANSYS has been used to develop an S-N diagram with a frequency of 1 Hz and loading ratio 0.1 Number of specific load cycles from Rainflow Counting in conjunction with S-N diagram from ANSYS has been utilized to calculate fatigue damage up to 30 years by Palmgren-Miner's linear hypothesis. / by Mohammad Wasim Akram. / Thesis (M.S.C.S.)--Florida Atlantic University, 2010. / Includes bibliography. / Electronic reproduction. Boca Raton, Fla., 2010. Mode of access: World Wide Web.

A comprehensive study was performed to overcome the design issues related to Ocean Current Turbine (OCT) blades. Statistical ocean current models were developed in terms of the probability density function, the vertical profile of mean velocity, and the power spectral density. The models accounted for randomness in ocean currents, tidal effect, and ocean depth. The proposed models gave a good prediction of the velocity variations at the Florida Straits of the Gulf Stream. A novel procedure was developed to couple Fluid-Structure Interaction (FSI) with blade element momentum theory. The FSI effect was included by considering changes in inflow velocity, lift and drag coefficients of blade elements. Geometric non-linearity was also considered to account for large deflection. The proposed FSI analysis predicted a power loss of 3.1 % due to large deflection of the OCT blade. The method contributed to saving extensive computational cost and time compared to a CFD-based FSI analysis. The random ocean current loadings were calculated by considering the ocean current turbulence, the wake flow behind the support structure, and the velocity shear. The random ocean current loadings had large probability of high stress ratio. Fatigue tests of GFRP coupons and composite sandwich panels under such random loading were performed. Fatigue life increased by a power function for GFRP coupons and by a linearlog function for composite sandwich panels as the mean velocity decreased. To accurately predict the fatigue life, a new fatigue model based on the stiffness degradation was proposed. Fatigue life of GFRP coupons was predicted using the proposed model, and a comparison was made with experimental results. As a summary, a set of new design procedures for OCT blades has been introduced and verified with various case studies of experimental turbines. / Includes bibliography. / Dissertation (Ph.D.)--Florida Atlantic University, 2017. / FAU Electronic Theses and Dissertations Collection

MoSiB alloys show promise as the next-generation turbine blade material due to their high-temperature strength and oxidation resistance afforded by a protective borosilicate surface layer. Powder processing and reactive synthesis of these alloys has proven to be a viable method and offers several advantages over conventional melt processing routes. Microstructures obtained have well-dispersed intermetallics in a continuous matrix of molybdenum solid-solution (Mo-ss). However, bend testing of pure Mo and Mo-ss samples has shown that, while the powder processing route can produce ductile Mo metal, the hardening effect of Si and B in solid-solution renders the matrix brittle. Testing at elevated temperatures (200°C) was performed in order to determine the ductile-to-brittle transition temperature of the metal as an indication of ductility. Methods of ductilizing the Mo-ss matrix such as annealing and alloying additions have been investigated.