The topic of the diploma thesis is the design of monolithic concrete structure CERIT in Brno. There are designed three preliminary variants of the concrete structure for the problematic place in the building. Selected variant is developed in detail design (the concrete wall). The solution comprises statical analysis, text section and drawing documentation.

The thesis deals with a design of a highway bridge with multiple spans. The bridge is constructed for highway D1 and goes across the river Bečva close to the city Přerov. Two different solutions were carried out from which a solution with subsequently prestressed box girder was chosen. Static model and load actions were modelled in program Scia Engineer 2016.0. Design checks were done manually according to corresponding Eurocodes. Load actions from wind, uneven support settling and horizontal actions from transit were neglecte.

This diploma thesis aims to design a structure of pedestrian bridge over the Svratka river. To make a preliminary study of possible bridging, three different outlines were drafted. The cable-stayed variant was selected for further analysis. Two towers, inclined in both their longitudinal and transverse direction, support a cast-in-place post-tensioned concrete deck through stay cables anchored in the tower and the deck. After determining the desired initial state, a finite element analysis was carried out using the Ansys software. The capacity of all main load-bearing elements was checked so it meets the ULS and SLS design criteria in accordance with EN 1992 codes.

The subject of this diploma thesis is the design and the assessment of post-tensioned bridge structure over deep wally, which transfer road D26,5/100 on D1 in Slovakia between Hubová – Ivachnová. Three variants were designed and compared. The most suitable variant of two identical bridges with box cross-section and constant height was further assess in detail.

The subject of this thesis is the design and assessment of the bridge across the expressway and the deep valley in section Hričovské Podhradie - Lietavská Lúčka of highway D1 in Slovakia. The box girder structure with eleven spans was chosen of three variants. For each course there is a separate structure. The design of the bridge is carried out according to limit states including consideration of the impact of construction. The assessment of the construction is carried out using the beam model. The appendix contains structural analysis, drawings and visualization of the bridge.

The diploma thesis is focused on structural design and assessment of lookout tower, which is made of reinforced concrete and steel bracing elements. Structural design was performer in accordance with valid eurocodes and standards. The work is accompanied by construction drawings, drawings of shapes, reinforcement and steel elements, and documents from manufacturers.

The content of the diploma thesis is design urban bridge in Považská Bystrica. From three possible options was selected one, which represents cable stayed bridge-extradosed with four spans. This selected option was elaborated in detail in this diploma thesis. Design procedures and assessments were performed to comply with ultimate limit state and serviceability limit state according to valid europeans standarts. The calculation model was performed in program Midas Civil in logitudinal axis and in SCIA Engineer in transversal axis. Structural assessment were done manually. The part of the diploma thesis are detailed drawings and visualizations.

The presented paper deals with a theoretical analysis of the ultimate limit state. The results of experimental research carried out at the Institute of Metal and Timber Structures headed by Assoc. Prof. Karmazinová and Professor Melcher were applied. The geometrically and materially nonlinear solution based on the Timošenko’s solution is verified by the FEM model in the computer programme system ANSYS. The random influence of initial imperfections is taken into consideration. The FEM model also includes the influence of residual stress. In the parametric study, the influence of residual stress on the cross-section plastification is researched into, its influence on the load carrying capacity limit is, together with the influence of other imperfections, the subject of the stochastic analysis, applying the Latin Hypercube Sampling (LHS). Further on, the study proves a direct effect of the concrete part of the cross-section (combination of materials steel-concrete) on the decrease of load carrying capacity limit of the beam caused by influence of the residual stress of steel. With regard to the importance of time dependent phenomena of the concrete creep for the load carrying capacity, the studies given in the Ph.D. thesis are oriented in this respect. The parametric studies of the influence of the concrete creep having applied the Standard Eurocode 2 provide both a comparison of load carrying capacity limits when using common and high-strength concrete types, and also the variability of load carrying capacities. It follows from the comparison of the statistical analysis outputs according to the design reliability conditions of the Standard EN1990 and of the approach of Eurocode 4 that the Eurocode 4 can be recommended for dimensioning of this member type. According to the studies which we carried out, the design in compliance with Eurocode 4 can be evaluated as the reliable one. A larger set of experimental data is necessary to determine the economy.

This diploma thesis deals with the design of the bridge o the road I/58 over a watercourse and dirt road. The main content is the design and calculation of a continuous bridge structure with two bays. During designing the bridge, I based on Czech and European standards especially ČSN EN 1991 and ČSN EN 1992. A two-beam structure was selected from the developed three variants of bridging. Drawing documentation, construction procedure, visualization and static calculation were prepared for it. The result is an economical bridge structure with high durability and almost maintenance-free operation.

Résumé : Ce projet de maîtrise s’intéresse au comportement ultime d’une structure en acier, contrôlée sismiquement par des amortisseurs élastomères et des contreventements en chevron. Les séismes peuvent causer des dommages considérables quand les infrastructures et les bâtiments ne sont pas construits selon les normes et les techniques appropriées. Par conséquent, réduire l’impact des séismes revient particulièrement à construire des ouvrages sécuritaires en tenant compte bien entendu du paramètre économique. Ainsi Gauron, Girard, Paultre et Proulx ont étudié en 2009, un système de reprise de forces latérales, constitué uniquement de treventements en chevron montés en série avec des amortisseurs en caoutchouc naturel fibré ayant de nombreux avantages. Premièrement, le système reste élastique sous le séisme de design en réduisant les efforts sismiques linéaires par un facteur supérieur à R[indice inférieur d] = 3 par rapport à un cadre conventionnel. Deuxièmement, il est capable de contrôler les déplacements sous la limite du CNBC 2010 (Code National du Bâtiment du Canada 2010), et même de réduire ces derniers dans certains cas. Par conséquent, il permet de réduire les sections des poutres et des poteaux des cadres par rapport à une structure conventionnelle ainsi que les coûts de réparation après un séisme. Toutefois, le comportement à l’état limite ultime d’un tel système, ses limites et ses réserves de sécurité restaient à déterminer. Ainsi, l’objectif global de ce projet de recherche est de déterminer les différents mécanismes de ruine possibles de ce système, d’établir des limites et réserves de sécurité, et de préciser, après avoir formulé certaines recommandations, à quelles conditions il peut être utilisé dans le dimensionnement de nouvelles structures. Pour atteindre les objectifs fixés, deux essais quasi statiques ont été réalisés sur deux cadres en acier dimensionnés avec le système. Des essais dynamiques ont aussi été réalisés afin d’avoir les propriétés viscoélastiques des amortisseurs. Le premier essai a mis en évidence un mécanisme de ruine inattendu et prématuré qui a souligné un défaut majeur dans les connexions des diagonales avec l’amortisseur. Le second essai a révélé un des mécanismes de ruine envisagés initialement où le caoutchouc se déchire après l’initiation du flambement dans la diagonale comprimée. Les résultats expérimentaux ont montré que l’amortisseur constitue le maillon faible du système, et que des efforts parasites peuvent réduire significativement la capacité portante des structures dimensionnées avec un tel système. Dans les deux cas, les résultats ont montré que la méthode de dimensionnement du système tel qu’elle est définie actuellement mérite d’être améliorée. En ce sens, des recommandations relatives au dimensionnement des différents éléments des structures dimensionnées avec le système ont été élaborées, particulièrement en ce qui concerne le caoutchouc et les connexions. // Abstract : This thesis focuses on the ultimate behavior of steel structures, controlled seismically by elastomeric dampers and chevron bracings. Earthquakes can cause considerable damages when infrastructures and buildings are not built considering appropriate standards and technics. Therefore, mitigating the impact of earthquakes means essentially building safe structures by taking account of economic parameters too. Thus Gauron, Girard, Paultre and Proulx studied in 2009 a seismic force resisting system consisting only of chevron braces connected in series with fiber-reinforced natural rubber dampers that offers many benefits. First, the system remains elastic under the design earthquake by reducing linear seismic efforts by a factor of R[subscript d] = 3 compared to a conventional frame. Secondly, it allows to control the displacements under the limits of NBCC 2010 (National Building Code of Canada 2010), and even to reduce them in some cases. Therefore, it allows a reduction of sections of beams and columns of conventional frames and it prevents repairing costs of the structure after an earthquake. However, the ultimate limit state behavior of this system, its limitations and safety reserves have not been determined yet. Thus, the overall objective of this project is to determine the different possible failure mechanisms of the system, to set its limits and safety reserves, and to state after some recommendations, how it can be used in the design of new structures. To achieve these objectives, two quasi static tests were performed on two steel frames designed with the new system. Dynamic tests were also conducted to get the viscoelastic properties of the damping material. The first quasi static test revealed an unexpected and premature failure mechanism that pointed out a major flaw in the connections of the braces with the damper. The second test revealed one of the failure mechanisms originally expected where the rubber tears after buckling of the compression brace. The experimental results have shown that the damper is the weak element in the system, and that additional forces can significantly reduce the structural capacity of structures designed with the system. In both cases, the results have shown that the actual design method of the system should be improved. Thus, recommendations for the design of elements of structures designed with this system have been developed, particularly with regard to the rubber and brace connections.