No / This paper presents results of the relationship between the degree of saturation and the matric suction head at static equilibrium and during dynamic flow of water using a Buchner funnel and a fully instrumented two-dimensional tank, respectively. The major influences of the dynamic flow on the relationships between the suction head and the degree of saturation are highlighted and discussed. The experimental results show that dynamic flow of water strongly affects the volume of entrapped air. The results also reveal that any scanning curve can be described as two parts, namely, transition and coinciding. The transition curve starts from the recent reversal degree of saturation and continues up to the previous reversal degree of saturation. The shape of the transition curve and the amount of hysteresis are not only a function of the reversal degree of saturation but are also a function of the saturation path history. The experimental results are used to examine the validity of the proposed analytical model by Parker and Lenhard in 1987 for describing the relationships between the degree of saturation and the matric suction head. It was found that Parker and Lenhard¿s model provides a good prediction of the relations provided that care should be taken for the value of the reversal degree of saturation at zero suction head.

The effect of compaction pressure on subsequent soil behaviour during isotropic consolidation has been investigated by conducting controlled-suction triaxial tests on samples of an unsaturated compacted silty soil. A comprehensive set of laboratory experiments was carried out in a double-walled triaxial apparatus on samples of unsaturated soil that were prepared using two different compaction pressures. The axis translation technique was used for creating the desired suctions in the samples. In the experiments, the soil samples were subjected to isotropic consolidation under constant suctions. The results show that different compaction pressures produce different fabrics in a soil and therefore affect the behaviour of the soil. The results also show that the value of yield stress and the location of the loading¿collapse (LC) yield curve are functions of soil fabric. Furthermore, it is shown that the slopes of normal consolidation lines for densely and loosely compacted samples differ in unsaturated conditions but are the same in saturated soils. A comparison is made between the behaviour of the dense and loose samples, and the difference in the behaviour is explained.

No description available.

No description available.

No / Accidental spills of hydrocarbons, such as Light Non-Aqueous Phase Liquids (LNAPLs), are one of the most common sources of subsurface contamination. Migration of LNAPL in a porous medium is influenced by various factors such as the number of fluids present in the unsaturated/saturated zones and the proportion of pores occupied by each fluid. The results for relationship between matric suction and degree of saturation are presented in this paper for water¿air, water¿LNAPL and LNAPL¿air systems in a sand. A simple and reliable setup using Buchner funnel was designed to obtain these relations. It was found that the relationship between matric suction head and degree of saturation is hysteretic for all the fluid systems (water¿air, water¿LNAPL and LNAPL¿air). Furthermore, the amount of hysteresis depended upon the fluid system, with the maximum hysteresis occurring for water¿air system. The results suggest that the amount of trapped air depends upon the reversal degree of saturation from drying to wetting.

Thesis (Ph. D.)--West Virginia University, 2006. / Title from document title page. Document formatted into pages; contains xi, 183 p. : ill. (some col.). Vita. Includes abstract. Includes bibliographical references.

Thesis (Ph. D.)--West Virginia University, 1999. / Title from document title page. Document formatted into pages; contains x, 125 p. : ill. Vita. Includes abstract. Includes bibliographical references.

Thesis (Ph. D.)--West Virginia University, 2009. / Title from document title page. Document formatted into pages; contains viii, 141 p. : ill. (some col.). Includes abstract. Includes bibliographical references.

Esta tese tem por objetivo analisar o comportamento mecânico de um solo coluvionar de arenito não saturado (Solo AV) em condições indeformadas e remoldados. Sua localização é na divisa dos estados de Santa Catarina e Rio Grande do Sul. Os corpos de prova foram moldados com o mesmo índice de vazios na condição indeformada e na condição remoldada com o intuito de se avaliar o papel da estrutura deste solo. Para este estudo foi modificado o equipamento triaxial com sucção controlada, apresentado por Pereira (2006), inserindo os medidores de deslocamentos locais nos corpos de prova (sensores de efeito Hall). A partir dos medidores de deformação locais foi possível observar a influência da sucção nos módulos de deformabilidade do solo AV para a condição remoldada. Foram determinadas as envoltórias de resistência ao cisalhamento para os ensaios na condição não saturada para corpos de prova indeformados e remoldados. Na condição não saturada observou-se que o ângulo de atrito interno (’) é influenciado pelo nível de sucção e tensão normal líquida aplicada. As envoltórias no plano tensão cisalhante versus sucção são não lineares e resultam, para baixos valores de sucção, em valores de b sempre superiores a ’. Os resultados indicaram que os corpos de prova indeformados, na condição saturada, apresentaram parâmetros e resistência ao cisalhamento superiores aos corpos de prova remoldados. Entretanto, para a condição não saturada, os corpos de prova remoldados apresentaram resistência ao cisalhamento superiores a dos corpos de prova indeformados. Os resultados dos ensaios do hollow cylinder indicaram que a magnitude da tensão principal intermediária influencia na resistência ao cisalhamento obtida. Pela variação da direção da tensão principal maior observou-se um comportamento anisotrópico nos corpos de prova remoldados. Em termos de parâmetros de resistência ao cisalhamento os ensaios triaxiais e hollow cylinder apresentaram resultados consistentes, de acordo com a literatura. Os principais modelos de previsão de resistência ao cisalhamento existentes, baseados em dados básicos do Solo AV, não apresentaram um bom ajustes para as condições de moldagem. Baseado em análises estatísticas, foi possível obter duas equações de ajuste, sendo uma linear exponencial para a condição indeformada e uma parabólica para a condição remoldada. / This thesis aims to analyze the mechanical behavior of an unsaturated sandstone colluvium soil (Soil AV) in undisturbed and remolded conditions. The colluvium is located on the border of the states of Santa Catarina and Rio Grande do Sul. The specimens were prepared with the same void ratio for undisturbed and remolded conditions in order to evaluate the soil structure. For this study the triaxial apparatus with suction-controll, presented by Pereira (2006), was improved by inserting local displacement traducers (Hall effect sensors). These tranducers allowed the evaluation of the influence of the suction on the Young’s modulus for the soil AV in the remolded condition. Shear strength envelopes were determined based on tests on unsaturated condition on undisturbed and remolded specimens. For the unsaturated condition, it was noted that the internal friction angle ('’) is influenced by the level of suction and net normal stress applied. The shear envelopes on the shear stress versus suction plane are nonlinear and showed b higher than ’, for low suction values. The results showed that undisturbed specimens in saturated conditions presented shear strength parameters and shear strength higher than the remolded specimens. However, in the unsaturated condition the remolded specimens showed higher shear strength than undisturbed specimens. The Hollow Cylinder test results indicated that the intermediate principal stress has influence on shear strength of the soil. By varying the direction of major principal stress it was noticed an anisotropic behavior in the remolded specimens. In terms of shear strength parameters triaxial and hollow cylinder tests presented consistent results as it was observed in the literature. Some of the models used to predict the shear strength, based on basic parameters of the soil AV, have not shown good matches for both, undisturbed and remolded conditions. Based on statistical analysis, it was possible to obtain two adjustment equations being a linear exponential to the undisturbed conditions and a parabolic for the remolded condition.

Esta tese tem por objetivo analisar o comportamento mecânico de um solo coluvionar de arenito não saturado (Solo AV) em condições indeformadas e remoldados. Sua localização é na divisa dos estados de Santa Catarina e Rio Grande do Sul. Os corpos de prova foram moldados com o mesmo índice de vazios na condição indeformada e na condição remoldada com o intuito de se avaliar o papel da estrutura deste solo. Para este estudo foi modificado o equipamento triaxial com sucção controlada, apresentado por Pereira (2006), inserindo os medidores de deslocamentos locais nos corpos de prova (sensores de efeito Hall). A partir dos medidores de deformação locais foi possível observar a influência da sucção nos módulos de deformabilidade do solo AV para a condição remoldada. Foram determinadas as envoltórias de resistência ao cisalhamento para os ensaios na condição não saturada para corpos de prova indeformados e remoldados. Na condição não saturada observou-se que o ângulo de atrito interno (’) é influenciado pelo nível de sucção e tensão normal líquida aplicada. As envoltórias no plano tensão cisalhante versus sucção são não lineares e resultam, para baixos valores de sucção, em valores de b sempre superiores a ’. Os resultados indicaram que os corpos de prova indeformados, na condição saturada, apresentaram parâmetros e resistência ao cisalhamento superiores aos corpos de prova remoldados. Entretanto, para a condição não saturada, os corpos de prova remoldados apresentaram resistência ao cisalhamento superiores a dos corpos de prova indeformados. Os resultados dos ensaios do hollow cylinder indicaram que a magnitude da tensão principal intermediária influencia na resistência ao cisalhamento obtida. Pela variação da direção da tensão principal maior observou-se um comportamento anisotrópico nos corpos de prova remoldados. Em termos de parâmetros de resistência ao cisalhamento os ensaios triaxiais e hollow cylinder apresentaram resultados consistentes, de acordo com a literatura. Os principais modelos de previsão de resistência ao cisalhamento existentes, baseados em dados básicos do Solo AV, não apresentaram um bom ajustes para as condições de moldagem. Baseado em análises estatísticas, foi possível obter duas equações de ajuste, sendo uma linear exponencial para a condição indeformada e uma parabólica para a condição remoldada. / This thesis aims to analyze the mechanical behavior of an unsaturated sandstone colluvium soil (Soil AV) in undisturbed and remolded conditions. The colluvium is located on the border of the states of Santa Catarina and Rio Grande do Sul. The specimens were prepared with the same void ratio for undisturbed and remolded conditions in order to evaluate the soil structure. For this study the triaxial apparatus with suction-controll, presented by Pereira (2006), was improved by inserting local displacement traducers (Hall effect sensors). These tranducers allowed the evaluation of the influence of the suction on the Young’s modulus for the soil AV in the remolded condition. Shear strength envelopes were determined based on tests on unsaturated condition on undisturbed and remolded specimens. For the unsaturated condition, it was noted that the internal friction angle ('’) is influenced by the level of suction and net normal stress applied. The shear envelopes on the shear stress versus suction plane are nonlinear and showed b higher than ’, for low suction values. The results showed that undisturbed specimens in saturated conditions presented shear strength parameters and shear strength higher than the remolded specimens. However, in the unsaturated condition the remolded specimens showed higher shear strength than undisturbed specimens. The Hollow Cylinder test results indicated that the intermediate principal stress has influence on shear strength of the soil. By varying the direction of major principal stress it was noticed an anisotropic behavior in the remolded specimens. In terms of shear strength parameters triaxial and hollow cylinder tests presented consistent results as it was observed in the literature. Some of the models used to predict the shear strength, based on basic parameters of the soil AV, have not shown good matches for both, undisturbed and remolded conditions. Based on statistical analysis, it was possible to obtain two adjustment equations being a linear exponential to the undisturbed conditions and a parabolic for the remolded condition.