Spelling suggestions: "subject:"vanadium steel."" "subject:"wanadium steel.""
1 |
The effect of very high temperature deformation on the hot ductility of a V-microalloyed steel /Rezaeian, Ahmad. January 2008 (has links)
No description available.
|
2 |
Dissolution of high melting point additions in liquid steelArgyropoulos, Stavros A. January 1981 (has links)
The kinetics of dissolution of titanium and vanadium in liquid steel has been studied. Two periods were distinguished: the steel shell period and the free dissolution period. / In the case of titanium, it is shown that the customary frozen shell of steel encases the cylinder following its initial immersion. Premature internal dissolution then begins as a result of liquid eutectic of Fe(,0.3) Ti(,0.7) composition forming at the inner steel shell boundary. This phenomenon triggers an exothermic dissolution and erosion of the inner steel shell. The net result is considerable shortened shell melting times. During the free dissolution period, the temperature of the titanium dissolving at the interface increases and the dissolution process becomes self-accelerating. / During the steel shell period with pure vanadium and ferrovanadium alloys, no reaction was observed between the steel shell and vanadium. For low grade ferrovanadium alloys, the dissolution proceeds via a heat transfer mechanism. On the other hand, for high grades, ferrovanadium mass transfer mechanisms dominate. / A simplified mathematical model of the process has been developed to describe the coupled heat and mass transfer phenomena involved in the various systems studied.
|
3 |
The behavior of iron and manganese sulfides during the solidification and processing of steels containing vanadium, titanium, and zirconiumHarris, Kenneth Wesley, January 1969 (has links)
Thesis (M.S.)--University of Wisconsin--Madison, 1969. / eContent provider-neutral record in process. Description based on print version record. Includes bibliographical references.
|
4 |
Dissolution of high melting point additions in liquid steelArgyropoulos, Stavros A. January 1981 (has links)
No description available.
|
5 |
Effect of molybdenum on dynamic precipitation and recrystallization in niobium and vanadium bearing steelsBacroix, Brigitte. January 1982 (has links)
No description available.
|
6 |
Effect of molybdenum on dynamic precipitation and recrystallization in niobium and vanadium bearing steelsBacroix, Brigitte. January 1982 (has links)
No description available.
|
7 |
The viability of beneficiating vanadium pentoxide to ferrovanadium in South AfricaCorbett, Lance, Brendan January 1992 (has links)
A research report submitted to the Faculty of Mining Engineering.
University of Witwatersrand, Johannesburg, in partial fulfillment of the
requirements for the degree of Master of Science in Engineering / Hlstorically South Africa has enjoyed a privileged position with its vast natural resource
base in that it has.not needed to generate wealth but has merely explored this base, The
only true way to create wealth, is to add value to a commodity by means of beneficiation,
South Africa is the world's largest producer of vanadium accounting for approximately 70% of the western world's requirements. Unfortunately the South African producers of vanadium mainly export vanadium in the form of slag and pentoxide, instead or ferrovanadium and other prime alloys. ( Abbreviation abstract) / AC 2018
|
Page generated in 0.0848 seconds