The Varina-Enon Bridge is a cable-stayed, precast, segmental, post-tensioned box girder bridge located in Richmond, Virginia. Inspectors noticed flexural cracking in July of 2012 that prompted concerns regarding long-term prestress losses in the structure. Prestress losses could impact the future performance, serviceability, and flexural strength of the bridge. Accurately quantifying prestress losses is critical for understanding and maintaining the structure during its remaining service life. Long-term prestress losses are estimated in the Varina-Enon Bridge using two methods. The first utilizes a time-dependent staged-construction analysis in a finite element model of the full structure to obtain predicted prestress losses using the CEB-FIP '90 code expressions for creep and shrinkage. The second method involves collecting data from instrumentation installed in the bridge that is used to back-calculate the effective prestress force. The prestress losses predicted by the finite element model were 44.9 ksi in Span 5, 47.8 ksi in Span 6, and 45.3 ksi in Span 9. The prestress losses estimated from field data were 50.0 ksi in Span 5, 48.0 ksi in Span 6, and 46.7 ksi in Span 9. The field data estimates were consistently greater than the finite element model predictions, but the discrepancies are relatively small. Therefore, the methods used to estimate the effective prestress from field data are validated. In addition, long-term prestress losses in the Varina-Enon Bridge are not significantly greater than expected. / Master of Science / Post-tensioned concrete uses stressed steel strands to apply a precompression force to concrete structures. This popular building technology can be used to create lighter, stiffer structures. Over time, the steel strands experience a reduction in force known as prestress losses. Accurately quantifying prestress losses is critical for understanding and maintaining a structure during its remaining service life. The Varina-Enon Bridge is a cable-stayed, prestressed box girder bridge located in Richmond, Virginia. Inspectors noticed cracking in July of 2012 that prompted concerns regarding long-term prestress losses in the structure. Prestress losses were estimated using two methods. The first method utilized a computer model of the full bridge. The second method used data from sensors installed on the bridge to back calculate prestress losses. It was found that the prestress losses estimated from field data were slightly greater than, but closely aligned with, the computer model results. Therefore, it was concluded that the Varina-Enon Bridge has not experienced significantly more prestress losses than expected.

To make sound decisions about the remaining life of a structure, the precise calculation of the prestress losses is very important. In post-tensioned structures, the prestress losses due to creep and shrinkage can cause serviceability issues and can reduce flexural capacity. The Varina-Enon Bridge is a cable-stayed, precast, segmental, post-tensioned box girder bridge located in Richmond, Virginia. Observation of flexural cracks in the bridge by inspectors promoted a study regarding long-term prestress losses in the structure. For understanding and sustaining the structure throughout its remaining service life, accurately quantifying prestress losses is important. Two approaches are used to predict long-term prestress losses on the Varina-Enon Bridge. The first approach involves a finite element computer model of the bridge which run a timedependent staged-construction analysis to obtain predicted prestress losses using the CEB-FIP '90 code expressions for creep and shrinkage. The second approach involves the compilation of data from instrumentation mounted in the bridge to back calculate the effective prestress force. The analysis using the computer model predicted the prestress losses as 44.6 ksi in Span 5, 47.9 ksi in Span 6, 45.3 ksi in Span 9, and 45.9 ksi in Span 11. The prestress losses estimated from field data were 50.0 ksi in Span 5, 48.0 ksi in Span 6, 46.7 ksi in Span 9, and 49.1 ksi in Span 11. It can be seen that relative to the results of field data estimations, the finite element analyses underestimated prestress loss, but given the degree of uncertainty in each form of estimation, the results are considered to fit well. / Master of Science / In order to apply a precompression force to concrete structures, post-tensioned concrete employs stressed steel strands. To construct lighter, stiffer structures, this popular building technology can be used. The steel strands undergo a reduction in force known as prestress losses over time. To make good decisions about the remaining life of a structure, the precise calculation of the prestress losses is very important. The Varina-Enon Bridge is a post-tensioned concrete box-girder bridge in Richmond Virginia. In July of 2012, observation of flexural cracks in the bridge by the inspectors promoted a study regarding long-term prestress losses in the structure. Two techniques are used to predict long-term prestress losses for this bridge. A computer model of the bridge is used in the first method to calculate losses using the design code. In order to measure prestress losses, the second technique used data from sensors mounted on the bridge. It was found that the estimation of losses closely matched those predicted at the time of the bridge construction and the computer model results. Based on this the final conclusion is made that the prestress loss in the Varina-Enon Bridge is not significantly more than expected.