Orientador: Antonio Celso Fonseca de Arruda / Dissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Engenharia Mecanica / Made available in DSpace on 2018-08-06T20:39:40Z (GMT). No. of bitstreams: 1 Novaes_AlexandreBenedito_M.pdf: 2452563 bytes, checksum: 94c8f5f390d6f6ec81d9a33c048027cb (MD5) Previous issue date: 2006 / Resumo: Neste trabalho, são apresentados diferentes modelos de Estações para Inspeção Técnica Veicular, de maneira a dar opções de adequar, o mais racionalmente possível, a sua instalação em diferentes regiões do país, dependendo da densidade de veículos, criando condições de minimizar custos da inspeção e ao mesmo tempo mantendo, também, uma distância adequada ao usuário. As propostas consideram Estações de diferentes produções, desde a alta (370 veículos/dia) até a baixa (15 veículos/dia), com o objetivo de ser uma ferramenta para avaliação de custos. Os equipamentos propostos e a metodologia da inspeção estão baseados em experiência internacional, com adequações à realidade brasileira. A seleção correta do modelo de Estação a ser utilizado tem fundamental importância no levantamento do valor final da inspeção,permitindo a determinação de custos de investimento e custeio / Abstract: This work presents different models of Stations for Technical Vehicular Inspection in order to provide options to adequate, as rationally as possible, their installation in different regions of the country, depending upon the density of vehicles and thus creating conditions to minimize costs with inspection and at the same time keeping an adequate distance from users. These proposals consider Stations of different productions, from the highest (370 vehicles per day), to the lowest (15 vehicles per day), with the scope of being a tool for evaluation of costs. The equipments suggested and the methodology of inspection are based on an international experience adequate to brasilian reality. The correct selection ofthe Station models to be utilized have fundamental importance in the evaluation of the final value of inspection, permitting this way to determine costs of investment and daily expenses / Mestrado / Materiais e Processos de Fabricação / Mestre em Engenharia Mecânica

No description available.

The National Institute for Occupational Safety and Health (NIOSH) has shown that carbon monoxide (CO) exposure levels which can induce carboxyhemoglobin (COHb) formation in excess of 5 percent can result in serious health consequences. In Dade County, Florida county vehicle inspectors are routinely exposed to CO on the job. To evaluate CO exposure levels, a Ecolyzer direct reading CO meter was placed in inspection lanes in 10 Dade County vehicle inspection stations. The results of this study indicate that in 3 stations, an 8-hour time-weighted exposure to carbon monoxide will induce inspector COHb levels in excess of 5 percent, and all stations have work sites where inspectors encounter ceiling exposure levels which may alter their predicted level of COHb formation. Although CO exposure in Dade County vehicle inspection stations was found to be influenced by several factors, the extent and severity of exposure can be reduced by engineering and administrative controls.

Indiana University-Purdue University Indianapolis (IUPUI) / Pedestrian Automatic Emergency Braking (PAEB) system for avoiding/mitigating pedestrian crashes have been equipped on some passenger vehicles. At present, there are many e orts for the development of common standard for the performance evaluation of PAEB. The Transportation Active Safety Institute (TASI) at Indiana University-Purdue University-Indianapolis has been studying the problems and ad- dressing the concerns related to the establishment of such a standard with support from Toyota Collaborative Safety Research Center (CSRC). One of the important components in the PAEB evaluation is the development of standard testing facili- ties at night, in which 70% pedestrian crash social costs occurs [1]. The test facility should include representative low-illuminance environment to enable the examination of sensing and control functions of di erent PAEB systems. This thesis work focuses on modeling low-illuminance driving environment and describes an approach to recon- struct the lighting conditions. The goal of this research is to characterize and model light sources at a potential collision case at low-illuminance environment and deter- mine possible recreation of such environment for PAEB evaluation. This research is conducted in ve steps. The rst step is to identify lighting components that ap- pear frequently on a low-illuminance environment that a ect the performance of the PAEB. The identi ed lighting components include ambient light, same side/opposite side light poles, opposite side car headlight. Next step is to collect all potential pedes- trian collision cases at night with GPS coordinate information from TASI 110 CAR naturalistic driving study video database. Thirdly, since ambient lighting is relatively random and lack of a certain pattern, ambient light intensity for each potential col- lision case is de ned and processed as the average value of a region of interest on all video frames in this case. Fourth step is to classify interested light sources from the selected videos. The temporal pro le method, which compressing region of interest in video data (x,y,t) to image data (x,y), is introduced to scan certain prede ned region on the video. Due to the fact that light sources (except ambient light) impose distinct light patterns on the road, image patterns corresponding to speci c light sources can be recognized and classi ed. All light sources obtained are stamped with GPS coordinates and time information which are provided in corresponding data les along with the video. Lastly, by grouping all light source information of each repre- sentative street category, representative light description of each street category can be generated. Such light description can be used for lighting construction of PAEB test facility.

Fundação Araucária de Apoio ao Desenvolvimento Científico e Tecnológico do Paraná / Este trabalho tem como objetivo desenvolver uma abordagem para auxiliar as montadoras na obtenção de informações sobre os problemas e falhas que ocorrem nos veículos durante o seu uso pelos motoristas, relacionando os dados obtidos com a leitura da telemetria do veículo, assim como as percepções do motorista sobre uma determinada falha. A exploração de técnicas que auxiliam o diagnóstico automotivo é um problema a ser discutido na engenharia. As técnicas de diagnóstico devem fornecer suporte à grande gama de sistemas que surgirão nos próximos anos. Assim, é possível também utilizar a conectividade que os celulares e veículo dispõem na atualidade, com o intuito de evoluir o produto oferecido e melhorar a experiência do cliente enquanto dirige. A inclusão do cliente no processo de diagnóstico, visa permitir que os projetistas identifiquem pontos que podem ser melhorados no carro, mesmo que não apresentem erro aparente. A opinião do cliente pode ser considerada, uma vez que ele é incluído no processo como um novo “sensor" (o mais inteligente e importante de todos) capaz de reportar suas percepções. Considerando este fato, a motivação deste trabalho se encontra em: (i) Procurar alternativas para aplicar de maneira eficiente a conectividade dos veículos no processo de diagnóstico; (ii)Permitir que as montadoras possam obter informações mais concretas dos veículos que comercializam. O objeto é fornecer um sistema de interface entre o usuário e o carro auxiliando a realização dos diagnósticos preventivos mais completos do que apenas usando a telemetria. Neste projeto busca-se que haja uma interação maior com o motorista, e que a experiência das montadoras possa entrar no processo de diagnóstico. Mesmo que o cliente não tenha tanta intimidade com o funcionamento do veículo, o sistema deve orientar o motorista no processo. A entrada de dados do cliente é realizada por texto ou comando de voz. Para a análise desta entrada de dados do cliente foi realizado um estudo de mineração de dados em bases que a montadora já possuía. Estas bases são entrevistas telefônicas nas quais a montadora pergunta ao cliente problemas percebidos no carro, e então as respostas são transcritas para a base. O estudo de mineração de dados foi realizado para a criação do classificador que é responsável por receber os dados de entrada do cliente e classifica-lo em um determinado problema ligado à multimídia ou relacionado ao motor do veículo. O software contido no celular será responsável por solicitar ao sistema de sensores do veículo as leituras necessárias para que o cliente obtenha as informações que deseja. Foi realizado um experimento no qual analistas de diagnóstico responderam a um questionário que buscava analisar se o sistema proposto realmente influenciava no processo de diagnóstico, fazendo com que a solução dos problemas no veículo seja realizada em menos etapas, se comparado com o processo atual. Os resultados mostraram que a abordagem diminuiu o número de etapas necessárias para a obtenção do diagnóstico correto. Dos três estudos de caso realizados, as etapas necessárias para se chegar ao diagnóstico apropriado diminuiu em uma etapa para o primeiro estudo de caso, diminuiu uma etapa para o segundo estudo de caso, e três etapas a menos para o terceiro estudo de caso. Com estes resultados foi possível demonstrar que a abordagem proposta influiu no processo de diagnóstico aplicado atualmente pelas montadoras e concessionárias analisadas. / The goal of this project is to develop an approach to assist automakers in obtaining information about the problems and failures that occur in the vehicles during their use by drivers, relating the data obtained by reading the telemetry of the vehicle, as well as the perceptions of the driver about a particular failure. The exploration of techniques to optimize automotive diagnosis is a problem to be discussed in Engineering. Diagnostic techniques should support the wide range of systems that will emerge in the coming years. Thus, it is also possible to use the connectivity that mobile phones and vehicles have today, in order to evolve the product offered and improve the customer experience while driving. The customer inclusion in the diagnostic process aims to allow engineers identifies points to be improved in the car, even if they dont present an apparent error. The customer opinion should be considered, since he/she is included in the process as a new "sensor"(the most intelligent and important of all) able to report his/her perceptions. Considering this fact, the motivation of this research is: (i) search for alternatives to efficiently apply vehicle connectivity in the diagnostic process, (ii) enable automakers to obtain more concrete information on the vehicles they sell. The object is provide an interface between the user and the car helping them to perform a more complete preventive diagnoses than only using telemetry. In this project it is sought that there is a greater interaction with the driver, and the experience of the automakers could be included the diagnostic process. Even if the customer isnt so accustomed with the operation of the vehicle, the system must guide the driver by the process. The customer input data is performed by text or voice command. The analysis of this customer input data, a data mining study was performed based on a base that automaker already had. These bases are telephone interviews in which the automaker asks the customer for perceived problems in the car, and then the answers are transcribed to the base. The data mining study was performed to create one classifier which was responsible for receiving the input data from the customer and sorting it into a particular problem related with the multimídia or related to the motor of the vehicle. The software contained in the mobile phone will be responsible asking to the vehicle sensor system for the readings necessary for the customer can to obtain the information he/she wants. An experiment was carried out in which diagnostic analysts answered a questionnaire that sought to analyze whether the proposed system actually influenced the diagnostic process, so the solution of the problems in the vehicle was performed on less steps compared to the current process. The results showed the approach reduced the number of steps required to obtain the correct diagnosis. Of the three case studies performed, the steps required to arrive at appropriate diagnosis decreased in one step to the first case study, one step to the second case study decreased, and three less steps to the third case study . With these results it was possible to demonstrate that the proposed approach influenced the diagnostic process currently applied by the automakers and concessionaires analyzed.