Sound propagation in very shallow water is one of the issues of the ocean acoustic. Because of close distance to the shore and short range to the bottom, the building of sound propagation model in shallow water is much more difficult than in deep water. Even though, the increasing needs of upper-sea construction engineering and near-shore surveillance make this subject more and more important. This study is to build a high sensitive underwater recording system, use it to collect data and to find out which parameters affect the sound propagation in very shallow water most. The study contains underwater recording system construction, shallow water recording experiment and comparison of OASES simulation results and the collective data. The system is constructed with two ITC6050C hydrophones and data acquisition devices. After several tests of reliability, the system is put in the sea area about 10 m depth. And the two hydrophones were moored 1 m above the bottom and 2.5 m below sea surface separately. The experiment use a moving fishing boat motor noise as sound source and the experimental results are shown as the spectrogram of sound field. The computer simulation uses OASES modules to simulate the experimental area and Pekeris waveguide propagation as the theoretical environment of very shallow water. By comparing the simulation results and the collective data ,the study finds out that the major parameters of sound propagation in the experimental area are the pressure sound speed and the depth of the sound source.