A new visual registration algorithm (Adaptive Iterative Closest Keypoint, AICK) is tested and evaluated as a positioning tool on a Micro Aerial Vehicle (MAV). Captured frames from a Kinect like RGB-D camera are analyzed and an estimated position of the MAV is extracted. The hope is to find a positioning solution for GPS-denied environments. This thesis is focused on an indoor office environment. The MAV is flown manually, capturing in-flight RGB-D images which are registered with the AICK algorithm. The result is analyzed to come to a conclusion if AICK is viable or not for autonomous flight based on on-board positioning estimates. The result shows potential for a working autonomous MAV in GPS-denied environments, however there are some surroundings that have proven difficult. The lack of visual features on e.g., a white wall causes problems and uncertainties in the positioning, which is even more troublesome when the distance to the surroundings exceed the RGB-D cameras depth range. With further work on these weaknesses we believe that a robust autonomous MAV using AICK for positioning is plausible. / En ny visuell registreringsalgoritm (Adaptive Iterative Closest Keypoint, AICK) testas och utvärderas som ett positioneringsverktyg på en Micro Aerial Vehicle (MAV). Tagna bilder från en Kinect liknande RGB-D kamera analyseras och en approximerad position av MAVen beräknas. Förhoppningen är att hitta en positioneringslösning för miljöer utan GPS förbindelse, där detta arbete fokuserar på kontorsmiljöer inomhus. MAVen flygs manuellt samtidigt som RGB-D bilder tas, dessa registreras sedan med hjälp av AICK. Resultatet analyseras för att kunna dra en slutsats om AICK är en rimlig metod eller inte för att åstadkomma autonom flygning med hjälp av den uppskattade positionen. Resultatet visar potentialen för en fungerande autonom MAV i miljöer utan GPS förbindelse, men det finns testade miljöer där AICK i dagsläget fungerar undermåligt. Bristen på visuella särdrag på t.ex. en vit vägg inför problem och osäkerheter i positioneringen, ännu mer besvärande är det när avståndet till omgivningen överskrider RGB-D kamerornas räckvidd. Med fortsatt arbete med dessa svagheter är en robust autonom MAV som använder AICK för positioneringen rimlig.

We present a system that estimates the motion of a robot relying solely on images from onboard omnidirectional camera (visual odometry). Compared to other visual odometry hardware, ours is unusual in utilizing high resolution, low frame-rate (1 to 3 Hz) omnidirectional camera mounted on a robot that is propelled using continuous tracks. We focus on high precision estimates in scenes, where objects are far away from the camera. This is achieved by utilizing omnidirectional camera that is able to stabilize the motion estimates between camera frames that are known to be ill-conditioned for narrow field of view cameras. We employ feature based-approach for estimation camera motion. Given our hardware, possibly high ammounts of camera rotation between frames can occur. Thus we use techniques of feature matching rather than feature tracking.

We present a system that estimates the motion of a robot relying solely on images from onboard omnidirectional camera (visual odometry). Compared to other visual odometry hardware, ours is unusual in utilizing high resolution, low frame-rate (1 to 3 Hz) omnidirectional camera mounted on a robot that is propelled using continuous tracks. We focus on high precision estimates in scenes, where objects are far away from the camera. This is achieved by utilizing omnidirectional camera that is able to stabilize the motion estimates between camera frames that are known to be ill-conditioned for narrow field of view cameras. We employ feature based-approach for estimation camera motion. Given our hardware, possibly high ammounts of camera rotation between frames can occur. Thus we use techniques of feature matching rather than feature tracking.

<div>For either entertainment or documenting purposes, people are starting to record their life using egocentric cameras, mounted on either a person or a vehicle. Our target is to improve the utility of these egocentric videos. </div><div><br></div><div>For egocentric videos with an entertainment purpose, we aim to enhance the viewing experience to improve overall enjoyment. We focus on First-Person Videos (FPVs), which are recorded by wearable cameras. People record FPVs in order to share their First-Person Experience (FPE). However, raw FPVs are usually too shaky to watch, which ruins the experience. We explore the mechanism of human perception and propose a biometric-based measurement called the Viewing Experience (VE) score, which measures both the stability and the First-person Motion Information (FPMI) of a FPV. This enables us to further develop a system to stabilize FPVs while preserving their FPMI. Experimental results show that our system is robust and efficient in measuring and improving the VE of FPVs.</div><div><br></div><div>For egocentric videos whose goal is documentation, we aim to build a system that can centrally collect, compress and manage the videos. We focus on Dash Camera Videos (DCVs), which are used by people to document the route they drive each day. We proposed a system that can classify videos according to the route they drove using GPS information and visual information. When new DCVs are recorded, their bit-rate can be reduced by jointly compressing them with videos recorded on the similar route. Experimental results show that our system outperforms other similar solutions and the standard HEVC particularly in varying illumination.</div><div><br></div><div>The First-Person Video viewing experience topic and the Dashcam Video compression topic are two representations of applications rely on Visual Odometers (VOs): visual augmentation and robotic perception. Different applications have different requirement for VOs. And the performance of VOs are also influenced by many different factors. To help our system and other users that also work on similar applications, we further propose a system that can investigate the performance of different VOs under various factors. The proposed system is shown to be able to provide suggestion on selecting VOs based on the application.</div>

O problema da localização consiste em estimar a posição de um robô com relação a algum referencial externo e é parte essencial de sistemas de navegação de robôs e veículos autônomos. A localização baseada em odometria visual destaca-se em relação a odometria de encoders na obtenção da rotação e direção do movimento do robô. Esse tipo de abordagem é também uma escolha atrativa para sistemas de controle de veículos autônomos em ambientes urbanos, onde a informação visual é necessária para a extração de informações semânticas de placas, semáforos e outras sinalizações. Neste contexto este trabalho propõe o desenvolvimento de um sistema de odometria visual utilizando informação visual de uma câmera monocular baseado em reconstrução 3D para estimar o posicionamento do veículo. O problema da escala absoluta, inerente ao uso de câmeras monoculares, é resolvido utilizando um conhecimento prévio da relação métrica entre os pontos da imagem e pontos do mundo em um mesmo plano. / The localization problem consists of estimating the position of the robot with regards to some external reference and it is an essential part of robots and autonomous vehicles navigation systems. Localization based on visual odometry, compared to encoder based odometry, stands out at the estimation of rotation and direction of the movement. This kind of approach is an interesting choice for vehicle control systems in urban environment, where the visual information is mandatory for the extraction of semantic information contained in the street signs and marks. In this context this project propose the development of a visual odometry system based on structure from motion using visual information acquired from a monocular camera to estimate the vehicle pose. The absolute scale problem, inherent with the use of monocular cameras, is achieved using som previous known information regarding the metric relation between image points and points lying on a same world plane.

Extrair informação de profundidade a partir de imagens bidimensionais é um importante problema na área de visão computacional. Diversas aplicações se beneficiam desta classe de algoritmos tais como: robótica, a indústria de entretenimento, aplicações médicas para diagnóstico e confecção de próteses e até mesmo exploração interplanetária. Esta aplicação pode ser dividida em duas etapas interdependentes: a estimação da posição e orientação da câmera no momento em que a imagem foi gerada, e a estimativa da estrutura tridimensional da cena. Este trabalho foca em técnicas de visão computacional usadas para estimar a trajetória de um veículo equipado com uma câmera, problema conhecido como odometria visual. Para obter medidas objetivas de eficiência e precisão, e poder comparar os resultados obtidos com o estado da arte, uma base de dados de alta precisão, bastante utilizada pela comunidade científica foi utilizada. No curso deste trabalho novas técnicas para rastreamento de detalhes, estimativa de posição de câmera, cálculo de posição 3D de pontos e recuperação de escala são propostos. Os resultados alcançados superam os mais bem ranqueados trabalhos na base de dados escolhida até o momento da publicação desta tese. / Recovering three-dimensional information from bi-dimensional images is an important problem in computer vision that finds several applications in our society. Robotics, entertainment industry, medical diagnose and prosthesis, and even interplanetary exploration benefit from vision based 3D estimation. The problem can be divided in two interdependent operations: estimating the camera position and orientation when each image was produced, and estimating the 3D scene structure. This work focuses on computer vision techniques, used to estimate the trajectory of a vehicle equipped camera, a problem known as visual odometry. In order to provide an objective measure of estimation efficiency and to compare the achieved results to the state-of-the-art works in visual odometry a high precision popular dataset was selected and used. In the course of this work new techniques for image feature tracking, camera pose estimation, point 3D position calculation and scale recovery are proposed. The achieved results outperform the best ranked results in the popular chosen dataset.

Research efforts on the development of autonomous vehicles date back to the 1920s and recent announcements indicate that those cars are close to becoming commercially available. However, the most successful prototypes that are currently being demonstrated rely on an expensive set of sensors. This study investigates the use of an affordable vision system as a planner for the Robocart, an autonomous golf cart prototype developed by the Wireless Innovation Laboratory at WPI. The proposed approach relies on a stereo vision system composed of a pair of Raspberry Pi computers, each one equipped with a Camera Module. They are connected to a server and their clocks are synchronized using the Precision Time Protocol (PTP). The server uses timestamps to obtain a pair of simultaneously captured images. Images are processed to generate a disparity map using stereo matching and points in this map are reprojected to the 3D world as a point cloud. Then, an occupancy grid is built and used as input for an A* graph search that finds a collision-free path for the robot. Due to the non-holonomic constraints of a car-like robot, a Pure Pursuit algorithm is used as the control method to guide the robot along the computed path. The cameras are also used by a Visual Odometry algorithm that tracks points on a sequence of images to estimate the position and orientation of the vehicle. The algorithms were implemented using the C++ language and the open source library OpenCV. Tests in a controlled environment show promising results and the interfaces between the server and the Robocart have been defined, so that the proposed method can be used on the golf cart as soon as the mechanical systems are fully functional.

Un grand nombre d'applications de robotique embarquées pourrait bénéficier d'une détection explicite des objets mobiles. A ce jour, la majorité des approches présentées repose sur la classification, ou sur une analyse structurelle de la scène (la V-Disparité est un bon exemple de ces approches). Depuis quelques années, nous sommes témoins d'un intérêt croissant pour les méthodes faisant collaborer activement l'analyse structurelle et l'analyse du mouvement. Ces deux processus sont en effet étroitement liés. Dans ce contexte, nous proposons, à travers de travail de thèse, deux approches différentes. Si la première fait appel à l'intégralité de l'information stéréo/mouvement, la seconde se penche sur le cas des capteurs monoculaires, et permet de retrouver une information partielle.La première approche présentée consiste en un système innovation d'odométrie visuelle. Nous avons en effet démontré que le problème d'odométrie visuelle peut être posé de façon linéaire, alors que l'immense majorité des auteurs sont contraint de faire appel à des méthodes d'optimisation non-linéaires. Nous avons également montré que notre approche permet d'atteindre, voire de dépasser le niveau de performances présenté par des système matériels haut de gamme (type centrale inertielle). A partir de ce système d'odométrie visuelle, nous définissons une procédure permettant de détecter les objets mobiles. Cette procédure repose sur une compensation de l'influence de l'égo-mouvement, puis une mesure du mouvement résiduel. Nous avons ensuite mené une réflexion de fond sur les limitations et les sources d'amélioration de ce système. Il nous est apparu que les principaux paramètres du système de vision (base, focale) ont un impact de premier plan sur les performances du détecteur. A notre connaissance, cet impact n'a jamais été décrit dans la littérature. Il nous semble cependant que nos conclusions peuvent constituer un ensemble de recommandations utiles à tout concepteur de système de vision intelligent.La seconde partie de ce travail porte sur les systèmes de vision monoculaire, et plus précisément sur le concept de C-Vélocité. Alors que la V-Disparité a défini une transformée de la carte de disparité permettant de mettre en avant certains plans de l'image, la C-Vélocité défini une transformée du champ de flot optique, et qui utilise la position du FoE, qui permet une détection facile de certains plans spécifiques de l'image. Dans ce travail, nous présentons une modification de la C-Vélocité. Au lieu d'utiliser un a priori sur l'égo-mouvement (la position du FoE) afin d'inférer la structure de la scène, nous utilisons un a priori sur la structure de la scène afin de localiser le FoE, donc d'estimer l'égo-mouvement translationnel. Les premiers résultats de ce travail sont encourageants et nous permettent d'ouvrir plusieurs pistes de recherches futures. / Many embedded robotic applications could benefit from an explicit detection of mobile objects. To this day, most approaches rely on classification, or on some structural scene analysis (for instance, V-Disparity). During the last few years, we've witnessed a growing interest for collaboration methods, that use actively btw structural analysis and motion analysis. These two processes are, indeed, closely related. In this context, we propose, through this study, two novel approaches that address this issue. While the first one use information from stereo and motion, the second one focuses on monocular systems, and allows us to retrieve a partial information.The first presented approach consists in a novel visual odometry system. We have shown that, even though the wide majority of authors tackle the visual odometry problem as non-linear, it can be shown to be purely linear. We have also shown that our approach achieves performances, as good as, or even better than the ones achieved by high-end IMUs. Given this visual odometry system, we then define a procedure allowing us to detect mobile objects. This procedure relies on a compensation of the ego-motion and a measure of the residual motion. We then lead a reflexion on the causes of limitation and the possible sources of improvement of this system. It appeared that the main parameters of the vision system (baseline, focal length) have a major impact on the performances of our detector. To the best of our knowledge, this impact had never been discussed, prior to our study. However, we think that our conclusion could be used as a set of recommendations, useful for every designer of intelligent vision system.the second part of this work focuses on monocular systems, and more specifically on the concept of C-Velocity. When V-Disparity defined a disparity map transform, allowing an easy detection of specific planes, C-Velocity defines a transform of the optical flow field, using the position of the FoE, allowing an easy detection of specific planes. Through this work, we present a modification of the C-Velocity concept. Instead of using a priori knowledge of the ego-motion (the position of the FoE) in order to determine the scene structure, we use a prior knowledge of the scene structure in order to localize the FoE, thus the translational ego-motion. the first results of this work are promising, and allow us to define several future works.

We present a system that estimates the motion of a robot relying solely on images from onboard omnidirectional camera (visual odometry). Compared to other visual odometry hardware, ours is unusual in utilizing high resolution, low frame-rate (1 to 3 Hz) omnidirectional camera mounted on a robot that is propelled using continuous tracks. We focus on high precision estimates in scenes, where objects are far away from the camera. This is achieved by utilizing omnidirectional camera that is able to stabilize the motion estimates between camera frames that are known to be ill-conditioned for narrow field of view cameras and the fact that low frame-rate of the imaging system allows us to focus computational resources on utilizing high resolution images. We employ feature based-approach for estimation camera motion. Given our hardware, possibly high ammounts of camera rotation between frames can occur. Thus we use techniques of feature matching rather than feature tracking.

Visual Simultaneous Localization And Mapping (SLAM) allows for three dimensionalreconstruction from a camera’s output and simultaneous positioning of the camera withinthe reconstruction. With use cases ranging from autonomous vehicles to augmentedreality, the SLAM field has garnered interest both commercially and academically. A SLAM system performs odometry as it estimates the camera’s movement throughthe scene. The incremental estimation of odometry is not error free and exhibits driftover time with map inconsistencies as a result. Detecting the return to a previously seenplace, a loop, means that this new information regarding our position can be incorporatedto correct the trajectory retroactively. Loop detection can also facilitate relocalization ifthe system loses tracking due to e.g. heavy motion blur. This thesis proposes an odometric system making use of bundle adjustment within akeyframe based stereo SLAM application. This system is capable of detecting loops byutilizing the algorithm FAB-MAP. Two aspects of this system is evaluated, the odometryand the capability to relocate. Both of these are evaluated using the EuRoC MAV dataset,with an absolute trajectory RMS error ranging from 0.80 m to 1.70 m for the machinehall sequences. The capability to relocate is evaluated using a novel methodology that intuitively canbe interpreted. Results are given for different levels of strictness to encompass differentuse cases. The method makes use of reprojection of points seen in keyframes to definewhether a relocalization is possible or not. The system shows a capability to relocate inup to 85% of all cases when a keyframe exists that can project 90% of its points intothe current view. Errors in estimated poses were found to be correlated with the relativedistance, with errors less than 10 cm in 23% to 73% of all cases. The evaluation of the whole system is augmented with an evaluation of local imagedescriptors and pose estimation algorithms. The descriptor SIFT was found to performbest overall, but demanding to compute. BRISK was deemed the best alternative for afast yet accurate descriptor. Conclusions that can be drawn from this thesis is that FAB-MAP works well fordetecting loops as long as the addition of keyframes is handled appropriately.