The Glacier Creek volcanogenic massive sulfide (VMS) deposit is hosted within Late Triassic, oceanic back-arc or intra-arc, rift-related, bimodal volcanic rocks (Hyd or Tats Group) of the allochthonous Alexander terrane known as the Alexander Triassic Metallogenic Belt (ATMB). The deposit presently consists of four tabular massive sulfide lenses with a resource of 4.75 Mt. at 1.84% Cu, 4.57% Zn, 0.15% Pb, 0.28 g/t Au and 29.07 g/t Ag. A deposit-scale thrust fault offsets stratigraphy along the axial surface of a deposit-scale anticline. The massive sulfide lenses are barite-rich and are divided into 6 main ore-types based on mineral assemblages. There is a large range of sphalerite compositions, with low-Fe sphalerite dominant throughout the lenses and high-Fe sphalerite at the top and bottom of the lenses in pyrrhotite-rich zones. Lenses contain anomalous Sb, Hg and Tl. Gangue minerals include barite, quartz, barian-muscovite, calcite, albite, highly subordinate chlorite and locally hyalophane and celsian. Overlying massive sulfide is a tuffaceous hydrothermal sediment with anomalous REE patterns and local hyalophane. The general footwall to all four lenses is a thick unit of coherent to volcaniclastic feldspar-phyric basalt containing extensive lateral alteration. Four alteration facies are recognized based on mineral assemblages. Mass balance calculations for the footwall indicate general gains of S, Fe, Si and K with coincident loss of Ca, Na and Mg, along with trace element gains of Tl, Sb, Hg, Ba, Zn, Cu, As and loss of Sr with increased alteration intensity. Short wavelength infrared (SWIR) spectroscopy shows a general decrease in Na, K and Al content of muscovite and increase of Fe+Mg and Ba content towards ore. Integrated petrographic, mineral, chemical and sulfur-isotope data suggest a transition during deposit formation, from high-temperature, acidic, reduced hydrothermal fluids mixing with oxidized, SO4-rich seawater, to later cooler, low fO2-fS2 conditions of formation and a lack of SO4 in seawater.

The Glacier Creek volcanogenic massive sulfide (VMS) deposit is hosted within Late Triassic, oceanic back-arc or intra-arc, rift-related, bimodal volcanic rocks (Hyd or Tats Group) of the allochthonous Alexander terrane known as the Alexander Triassic Metallogenic Belt (ATMB). The deposit presently consists of four tabular massive sulfide lenses with a resource of 4.75 Mt. at 1.84% Cu, 4.57% Zn, 0.15% Pb, 0.28 g/t Au and 29.07 g/t Ag. A deposit-scale thrust fault offsets stratigraphy along the axial surface of a deposit-scale anticline. The massive sulfide lenses are barite-rich and are divided into 6 main ore-types based on mineral assemblages. There is a large range of sphalerite compositions, with low-Fe sphalerite dominant throughout the lenses and high-Fe sphalerite at the top and bottom of the lenses in pyrrhotite-rich zones. Lenses contain anomalous Sb, Hg and Tl. Gangue minerals include barite, quartz, barian-muscovite, calcite, albite, highly subordinate chlorite and locally hyalophane and celsian. Overlying massive sulfide is a tuffaceous hydrothermal sediment with anomalous REE patterns and local hyalophane. The general footwall to all four lenses is a thick unit of coherent to volcaniclastic feldspar-phyric basalt containing extensive lateral alteration. Four alteration facies are recognized based on mineral assemblages. Mass balance calculations for the footwall indicate general gains of S, Fe, Si and K with coincident loss of Ca, Na and Mg, along with trace element gains of Tl, Sb, Hg, Ba, Zn, Cu, As and loss of Sr with increased alteration intensity. Short wavelength infrared (SWIR) spectroscopy shows a general decrease in Na, K and Al content of muscovite and increase of Fe+Mg and Ba content towards ore. Integrated petrographic, mineral, chemical and sulfur-isotope data suggest a transition during deposit formation, from high-temperature, acidic, reduced hydrothermal fluids mixing with oxidized, SO4-rich seawater, to later cooler, low fO2-fS2 conditions of formation and a lack of SO4 in seawater.

The giant Kidd Creek Mine is an Archean Cu-Zn-Ag deposit in the Abitibi Greenstone belt, located in the Superior Province of Canada and is one of the largest known base metal massive sulfide mines in the world with a tonnage of 170.7 Mt (Past production, Resource and Reserve). The massive sulfides in Mine D comprise a number of ore lenses that are interpreted to be the downplunge continuation of the Central orebody from the upper mine. These are referred to as the West, Main, and South lenses. The massive sulfides overlie a silicified rhyolitic unit at the top of a mixed assemblage of rhyolite flows, volcaniclastic sediments and ultramafic flows. The sheared nature of the fragmental units in the hanging wall of the deposit, at depth, illustrates the greater deformation that has occurred than in the upper mine. Metal zonation and the distribution of Cu stringer mineralization suggest that the West and Main lenses may be part of a single massive sulfide body (Main orebody) that has been structurally dismembered. The South Lens is a detached body, separated by late faults. The large Cu stringer zone beneath the West and Main lenses has a thickness of up to 150 metres, and is much broader and structurally remobilized in Mine D partially due to a newly identified series of vertically trending offset faults, that extends along the entire length of the massive sulfide bodies. A number of features of the North, Central and South orebodies in the upper part of the mine (e.g., Se-rich halo around Cu-rich zones) have been recognized in Mine D and provide an important framework for correlating the deep orebodies with the upper levels of the mine. Drilling below the current mine levels indicates that the massive sulfide and Cu stringer zones continue below 10,200 feet (3109 m) and highlight the remarkable continuity of the deposit downplunge with no end in sight. Two main ore suites have been recognized in the upper part of the mine and in Mine D: a low-temperature, polymetallic assemblage of Zn, Ag, Pb, Cd, Sn, Sb, As, Hg, ±Tl, ±W, and a higher-temperature suite of Cu, Co, As, Bi, Se, In, ±Ni. More than 25 different ore minerals and ore-related gangue minerals are present, including Co-As-sulfides, Cu-Sn-sulfides, Ag-minerals, and selenides. The massive ores consist mainly of pyrite, pyrrhotite, sphalerite, magnetite and chalcopyrite, together with minor galena, tetrahedrite, arsenopyrite, and native silver with a quartz and siderite gangue. Despite the high Ag content of the ores, the majority of the massive sulfides are remarkably Au poor except for a local gold zone that has been recognized in the deep mine in association with high-temperature mineralization. The trace elements in the ores exhibit strong zonation and diverse mineralogy. Spectacular albite porphyroblasts, up to 1 cm in size occur in the most Cu-rich ores of Mine D which are coincident with the peak of regional metamorphism and likely represent higher metamorphic or hydrothermal temperatures. Overall the orebodies have remained remarkably similar downplunge. However, unlike the upper part of the mine, pyrrhotite is dominantly hexagonal, only tetrahedrite was observed as the dominant sulfosalt, and magnetite occurs as both blebby porphyroblasts and as abundant intergrowths with sphalerite-chalcopyrite ores and siderite. These characteristics suggest that the deep mine has been subjected to higher metamorphic temperatures, possibly related to depth of burial, and that the original hydrothermal fluids may of had a lower H2S/CO2 and/or higher temperatures.

The Glacier Creek volcanogenic massive sulfide (VMS) deposit is hosted within Late Triassic, oceanic back-arc or intra-arc, rift-related, bimodal volcanic rocks (Hyd or Tats Group) of the allochthonous Alexander terrane known as the Alexander Triassic Metallogenic Belt (ATMB). The deposit presently consists of four tabular massive sulfide lenses with a resource of 4.75 Mt. at 1.84% Cu, 4.57% Zn, 0.15% Pb, 0.28 g/t Au and 29.07 g/t Ag. A deposit-scale thrust fault offsets stratigraphy along the axial surface of a deposit-scale anticline. The massive sulfide lenses are barite-rich and are divided into 6 main ore-types based on mineral assemblages. There is a large range of sphalerite compositions, with low-Fe sphalerite dominant throughout the lenses and high-Fe sphalerite at the top and bottom of the lenses in pyrrhotite-rich zones. Lenses contain anomalous Sb, Hg and Tl. Gangue minerals include barite, quartz, barian-muscovite, calcite, albite, highly subordinate chlorite and locally hyalophane and celsian. Overlying massive sulfide is a tuffaceous hydrothermal sediment with anomalous REE patterns and local hyalophane. The general footwall to all four lenses is a thick unit of coherent to volcaniclastic feldspar-phyric basalt containing extensive lateral alteration. Four alteration facies are recognized based on mineral assemblages. Mass balance calculations for the footwall indicate general gains of S, Fe, Si and K with coincident loss of Ca, Na and Mg, along with trace element gains of Tl, Sb, Hg, Ba, Zn, Cu, As and loss of Sr with increased alteration intensity. Short wavelength infrared (SWIR) spectroscopy shows a general decrease in Na, K and Al content of muscovite and increase of Fe+Mg and Ba content towards ore. Integrated petrographic, mineral, chemical and sulfur-isotope data suggest a transition during deposit formation, from high-temperature, acidic, reduced hydrothermal fluids mixing with oxidized, SO4-rich seawater, to later cooler, low fO2-fS2 conditions of formation and a lack of SO4 in seawater.

The giant Kidd Creek Mine is an Archean Cu-Zn-Ag deposit in the Abitibi Greenstone belt, located in the Superior Province of Canada and is one of the largest known base metal massive sulfide mines in the world with a tonnage of 170.7 Mt (Past production, Resource and Reserve). The massive sulfides in Mine D comprise a number of ore lenses that are interpreted to be the downplunge continuation of the Central orebody from the upper mine. These are referred to as the West, Main, and South lenses. The massive sulfides overlie a silicified rhyolitic unit at the top of a mixed assemblage of rhyolite flows, volcaniclastic sediments and ultramafic flows. The sheared nature of the fragmental units in the hanging wall of the deposit, at depth, illustrates the greater deformation that has occurred than in the upper mine. Metal zonation and the distribution of Cu stringer mineralization suggest that the West and Main lenses may be part of a single massive sulfide body (Main orebody) that has been structurally dismembered. The South Lens is a detached body, separated by late faults. The large Cu stringer zone beneath the West and Main lenses has a thickness of up to 150 metres, and is much broader and structurally remobilized in Mine D partially due to a newly identified series of vertically trending offset faults, that extends along the entire length of the massive sulfide bodies. A number of features of the North, Central and South orebodies in the upper part of the mine (e.g., Se-rich halo around Cu-rich zones) have been recognized in Mine D and provide an important framework for correlating the deep orebodies with the upper levels of the mine. Drilling below the current mine levels indicates that the massive sulfide and Cu stringer zones continue below 10,200 feet (3109 m) and highlight the remarkable continuity of the deposit downplunge with no end in sight. Two main ore suites have been recognized in the upper part of the mine and in Mine D: a low-temperature, polymetallic assemblage of Zn, Ag, Pb, Cd, Sn, Sb, As, Hg, ±Tl, ±W, and a higher-temperature suite of Cu, Co, As, Bi, Se, In, ±Ni. More than 25 different ore minerals and ore-related gangue minerals are present, including Co-As-sulfides, Cu-Sn-sulfides, Ag-minerals, and selenides. The massive ores consist mainly of pyrite, pyrrhotite, sphalerite, magnetite and chalcopyrite, together with minor galena, tetrahedrite, arsenopyrite, and native silver with a quartz and siderite gangue. Despite the high Ag content of the ores, the majority of the massive sulfides are remarkably Au poor except for a local gold zone that has been recognized in the deep mine in association with high-temperature mineralization. The trace elements in the ores exhibit strong zonation and diverse mineralogy. Spectacular albite porphyroblasts, up to 1 cm in size occur in the most Cu-rich ores of Mine D which are coincident with the peak of regional metamorphism and likely represent higher metamorphic or hydrothermal temperatures. Overall the orebodies have remained remarkably similar downplunge. However, unlike the upper part of the mine, pyrrhotite is dominantly hexagonal, only tetrahedrite was observed as the dominant sulfosalt, and magnetite occurs as both blebby porphyroblasts and as abundant intergrowths with sphalerite-chalcopyrite ores and siderite. These characteristics suggest that the deep mine has been subjected to higher metamorphic temperatures, possibly related to depth of burial, and that the original hydrothermal fluids may of had a lower H2S/CO2 and/or higher temperatures.

[Truncated abstract. Formulae and special characters can only be approximated here. Please see the pdf version of this abstract for an accurate representation.] The 3.24 Ga Panorama VMS District, located in the Pilbara Craton of Western Australia, is exposed as a cross-section through subvolcanic granite intrusions and a coeval submarine volcanic sequence that hosts Zn-Cu mineralization. The near-complete exposure across the district, the very low metamorphic grade, and the remarkable preservation of primary igneous and volcanic textures provides an unparalleled opportunity to examine the P-T-X-source evolution of a VMS ore-forming system and to assess the role of the subvolcanic intrusions as heat sources and/or metal contributors to the overlying VMS hydrothermal system. Detailed mapping of the Panorama VMS District has revealed seven major vein types related to the VMS hydrothermal system or to the subvolcanic intrusions. (1) Quartz-chalcopyrite veins, hosted in granophyric granite immediately beneath the granite-volcanic contact, formed prior to main stage VMS hydrothermal convection, and were precipitated from mixed H2OCO 2-NaCl-KCl fluids with variable salinities (2.5 to 8.5 wt% NaCl equiv). (2) Quartz-sericite veins, ubiquitous across the top 50m of the volcanic sequence, were formed from an Archean seawater with a salinity of 9.7 to 11.2 wt% NaCl equiv at temperatures of 90° to 135°C. These veins formed synchronous with the regional feldspar-sericite-quartz-ankerite alteration during seawater recharge into the main stage VMS hydrothermal convection cells. (3) Quartz-pyrite veins hosted in granophyric granite, and (4) quartz-carbonate-pyrite veins hosted in andesitebasalt, also formed from relatively unevolved Archean seawater (5.5 to 10.1 wt% NaCl equiv; 150° to 225°C), but during the collapse of the VMS hydrothermal system when cool, unmodified seawater invaded the top of the subvolcanic intrusions. (5) Quartz-topaz-muscovite greisen, (6) quartz-chlorite-chalcopyrite vein greisen, and (7) hydrothermal Cu-Zn-Sn veins are hosted in the subvolcanic intrusions. Primary H2O-NaCl-CaCl2 fluid inclusions in the vein greisens were complex high temperature hypersaline inclusions (up to 590°C and up to 56 wt% NaCl equiv). The H2O-CO2-NaCl fluid inclusions in the Cu-Zn-Sn veins have variable salinities, ranging from 4.9 to 14.1 wt% NaCl equiv, and homogenization temperatures ranging from 160° to 325°C. The hydrothermal quartz veins and magmatic metasomatic phases in the subvolcanic intrusions were formed from a magmatic-hydrothermal fluid that had evolved through wallrock reactions, cooling, and finally mixing with seawater-derived VMS hydrothermal fluids.