The subject of this diploma thesis is the use of knowledge of multidimensional regression models in practice. The first part describes the theoretical basis for regression analysis. Then further we focus on modeling theory and nonlinear multidimensional models. The next part describes a real problem. This is the width of kerf of titanium alloy using wire electrical discharge machining (WEDM). We apply most of the theoretical knowledge to this problem, and we use regression analysis using Minitab software. We will analyze the data from different perspectives and create several multidimensional regression models. In the last part we summarize the results obtained by the regression analysis.

This diploma thesis deals with the issue of electroerosion machining of materials used in the aerospace industry. The introductory part presents the layout of aerospace materials and the methods by which they can be machined. The next chapter describes the basic principles of EDM. The experimental part is focused on electroerosive cutting of NIMONIC 263 alloy. The greatest emphasis was placed on determining the influence of the cutting wire material on the rate of contamination of the surface layer of the workpiece. The quality of the machined surface was assessed depending on the used wire and the selected machining parameters.

This marter’s thesis deals with the technology of electrical discharge wire cutting. There is described the basic nature of the electrical erosion, EDM principle and WEDM principle. The main part deals with the application of wire cutting in the manufacture pulley 68-8M-130 with a description of technology on the wire cutter Excetek V 650. At the end of the work is devoted to the statistical evaluation of the precision machined surfaces.

The dissertation is focused on streamlining production on wire electric discharge machine during cutting metal alloys, specifically low-alloy steel quality by CSN 41 4220. The first part contains a study of the current and modern technologies EDM wire cutting. The second part is focused on identifying key parameters to influence the WEDM process, a detailed analysis of the machined surfaces of samples and wire electrodes used for cutting. The result of this work was to explore the possibility, whether by performing planned experiment and subsequent evaluation in the future to determine exactly setting the key parameters influencing the process of WEDM.

My thesis is aimed at the application of wire electical discharge machining technology in the production of woodworking tools. All of this in the conditions of Vydona company. There is a theory of machining method plus a well-aranged division of cutter tools for wood in the introduction. The practical part describes in detail the procedur of cutting shaped plate out of tungsten carbide. As a result of the technical and at the same time the economic evaluation is an establishment of hourly rate for machine.

This thesis deals with technology of electric discharge machining with emphasis on application of the principle of material removal on wire cut electric discharge machine. The main part is concentrated on wire cut electric discharge machining in terms of a small tool making shop. The goal of the thesis is to create a wire cut electric discharge machining workplace in the company with a focus on the production of cutting tools. The thesis defines requirements for each component of cutting tools and strategies for their machining. Machining of model part and subsequent technical - economic evaluation is included in the final part.

This master´s thesis deals with unconventional technology of wire electrical discharge machining. There are described the principles and essence of electrical discharge machining and the principles related to wire electrical discharge machining with emphasis on the application of this technology in terms of medium-sized engineering company. There is also described the complete assembly of technolgy wire cutting and machining on wire cutter Excetek V 650. Then in the work there are statistically evaluated parameters precision machined surfaces, specifically to the belt pulley 116-8M-130. At the end of the work there is the technical-economic evaluation that addresses the hourly cost of machining on wire cutter Excetek V 650.

Fir tree root forms are one way to retain turbine blades in turbine disks. These features are ruled surfaces that span the entire thickness of the disk and are usually machined by broaching. With increasing use of new heat resistant and difficult-to-machine materials, mechanical machining methods exhibit severe problems with tool wear and surface integrity. To mitigate these problems, thermal material removal processes such as Wire Electrical Discharge Machining (WEDM) are being considered in the aerospace industry. Developments in turbine design have led to a root form geometry in the form of an arc across the thickness of the disk in order to decrease the contact stress by increasing the contact area between blade and disk. A curved surface such as this cannot be produced by conventional WEDM as it is not a ruled surface. A novel WEDM process is being developed where an arc shaped curve is formed from an axially moving wire to allow for the production of such curved surfaces. / Thesis / Master of Applied Science (MASc) / Turbine blades are attached to turbine disks with specially shaped, straight slots called Fir Tree Root Forms (FTRF) that can be cut with broaching tools. Broaches wear out quickly because the disk is made of very difficult to cut material and the aerospace industry is starting to use Wire Electric Discharge Machining (WEDM), instead of broaching, to cut these slots since it can easily cut the material used. New turbine disk designs have curved slots, which can not be cut with a straight broach or wire, and a new process is therefore being developed which uses an arc-shaped wire to cut the desired curved shapes.

This master’s thesis deals with technology of wire electrical discharge machining in theoretical and practical level. Theoretical part of the thesis explains in detail the principle of electrical discharge machining, describes functional parts and settings of a current wire EDM machines and also the possibility of using method for production of specific parts. Practical part of the thesis solves manufacturing of gearing on pinion manufactured by wire cutter EXCETEK V650 and statistically evaluates precision parameters on surfaces of the carriers taken by specific technological conditions with the same machine.