Spelling suggestions: "subject:"watersupply engineering.our africa"" "subject:"watersupply engineering.our affrica""
1 |
Remote monitoring and evaluation of a photovoltaic (PV) groundwater pumping systemMakhomo, Selbourne Rapoone January 2005 (has links)
Thesis (MTech (Technology))--Cape Peninsula University of Technology, 2005 / Potable water, and especially the accessibility to it, is an essential part of everyday life. Of
particular note, is the challenge that residents of remote rural African villages face in order to
gain access to this basic requirement. Specifically, the rural areas in the Northern Cape
(Province north of Cape Town) region in South Africa is one such example that illustrates
this problem very well. In order to address the requirements for drinkable water, various
types of water pumping technologies have been used. Up to now, the two competing water
pumping systems, diesel and photovoltaic (PV), have been the primary technologies deployed
in selected sites in the Northern Cape.
The manual data collection of water pumping system data in the Northern Cape is fraught
with impracticalities such as travel costs and requirements for skilled personnel. Therefore, as
a preliminary step to accelerate development and testing, a local experimental laboratory PV
water pumping rig was set-up within the Department of Mechanical Engineering at the Cape
University of Technology. A short-term analysis was performed over a period of three weeks
on the rig and the experimental results indicated the following: array efficiency of 16.3%,
system efficiency of 15.0% and an average system efficiency of 1.47%. However, the results
do indicate that long-term monitoring of PV water pumping systems can be suitable in
serving to determine dynamic system performance and system life cycle costs.
The purpose of this project is two-fold - firstly, to present the results on the work done on the
experimental PV system.
|
2 |
Lab-scale assessment and adaptation of wastewater for cultivation of microalgal biomass for biodiesel productionRamanna, Luveshan January 2015 (has links)
Submitted in fulfillment of the requirements of the degree of Master of Applied Science in Biotechnology, Durban University of Technology, 2015. / In light of the world’s declining fossil fuel reserves, the use of microalgal biodiesel has come to the forefront as a potentially viable alternative liquid fuel. The depleting freshwater reserves make the feasibility of this concept questionable. The use of wastewater reduces the requirement for depleting freshwater supplies. This project aimed to determine the viability of municipal domestic wastewater effluent as a substrate for microalgal growth, in order to generate an economical and environmentally friendly source of biofuel. Wastewater effluents from three domestic wastewater treatment plants were characterized in terms of known microalgal nutrients viz., ammonia, phosphate and nitrates. Phosphate concentrations varied throughout the year and were found to be low (< 3 mgL-1) whilst ammonia and nitrate concentrations ranged from 0 to 10 mgL-1 throughout the experimental period. These wastewaters were found to be suitable for cultivating microalgae. The study explored the cultivation of Chlorella sorokiniana on pre- and post-chlorinated domestic wastewater effluent to assess their potential as a medium for high microalgal culture density and lipid production. Post-chlorinated wastewater effluent was found to be superior to pre-chlorinated wastewater effluent, as evident by the higher biomass concentration. This wastewater stream did not contain high concentrations of bacteria when compared to pre-chlorinated wastewater effluent. Nitrogen is an essential nutrient required for regulating the growth and lipid accumulation in microalgae. Cultures growing in post-chlorinated effluent had a lifespan of 18 d. Residual nitrogen in wastewater effluent supported microalgal growth for limited periods. Supplementation using cheap, readily available nitrogen sources was required for optimal biomass and lipid production. Urea, potassium nitrate, sodium nitrate and ammonium nitrate were evaluated in terms of biomass and lipid production of C. sorokiniana. Urea showed the highest biomass yield of 0.216 gL-1 and was selected for further experimentation. Urea concentrations (0–10 gL-1) were assessed for their effect on growth and microalgal physiology using pulse amplitude modulated fluorometry. A concentration of 1.5 gL-1 urea produced 0.218 gL-1 biomass and 61.52 % lipid by relative fluorescence. Physiological stress was evident by the decrease in relative Electron Transport Rate from 10.45 to 6.77 and quantum efficiency of photosystem II charge separation from 0.665 to 0.131. Gas chromatography analysis revealed that C16:0, C18:0, C18:1, C18:2 and C18:3 were the major fatty acids produced by C. sorokiniana. Wastewater effluent has been considered an important resource for economical and sustainable microalgal biomass/lipid production. The study showed that C. sorokiniana was sufficiently robust to be cultivated on wastewater effluent supplemented with urea. The results indicate that supplemented wastewater effluent was an acceptable alternative to conventional media. Using a relatively cheap nitrogen source like urea can certainly improve the techno-economics of large scale biodiesel production.
|
3 |
Neotectonics and its applications for the exploration of groundwater in the fractured Karoo aquifers in the Eastern Cape,South AfricaMadi, Kakaba January 2010 (has links)
This study is part of an NRF sponsored research project entitled “Neotectonics and its applications for the exploration of groundwater in the fractured Karoo aquifers in the Eastern Cape” under the NRF Niche area of Water Resources Management and Sustainable Development in the Eastern Cape Province. The identification of relatively highly productive wells in the Karoo fractured aquifers is extremely difficult. This study aims to identify neotectonic zones and lower stress fields, and apply the results to groundwater exploration in the Eastern Cape Province. The methodologies adopted in this study include: a comprehensive literature review, extensive field mapping and investigation such as road cuts, sampling for laboratory studies, examination of seismic data, study of hot and ordinary springs, and interpretation of aerial photography and satellite images. Three main neotectonic belts were identified in the Eastern Cape (southern neotectonic belt, northern neotectonic belt and eastern neotectonic belt) based on literature review and field interpretations. The southern neotectonic belt (from the Cape Fold Belt to the lower Beaufort Group boundary) is characterized by the reactivation of the Coega-Bavianskloof and Sauer faults, the presence of a hot spring near Fort Beaufort, the slickenlines and discrete slickenlines and specifically the seismic events that were recorded in the Eastern Cape from 1850 to 2007. In this southern neotectonic belt the remote sensing has also revealed the presence of the Fort Beaufort fracture, the quartz veins seen in some dolerites and the different vegetation types along it may indicate that this fracture is possibly a fault; moreover the Quaternary sediments and weathered dolerites indicate that the Fort iii Beaufort fracture is characterized by groundwater circulation and accordingly is a good target for groundwater exploration, this fracture is a post-Karoo structure and possibly a neotectonic feature. In addition, the kaolin deposit, chiefly developed in the Dwyka tillite near Grahamstown is clearly controlled by neotectonic fracture zones. The northern neotectonic belt near the country of Lesotho is marked by the presence of the Senqu seismotectonic regime and hot springs. The Quaternary Amatole-Swaziland (formerly Ciskei-Swaziland) axis of uplift makes the eastern part of the province the third neotectonic zone, the asymmetric meanders of the Mbashe river in the vicinity of Qunu near Mthatha derived possibly from this Quaternary uplift; this asymmetric feature of meanders implies that the river has tried to maintain stability of its valley where tilting occurred. Within these neotectonic belts the central part of the Eastern Cape may be considered a static and inactive belt. A northwesterly trend for the maximum principal compresssional stress predominates in the Eastern Cape and is correlated with the present major structural control of the province. The current stress regime determination was derived from faults, joints and quartz veins only on kaolin deposits. Systematic joints reflect regional tectonic stress trajectories at the time of fracturing. Discharge rates of groundwater from boreholes as provided by the Department of Water and Forestry were used to confirm and predict water exploration targets. The region of Tabankulu (near Kwazulu Natal) in the northern neotectonic belt has remarkable discharge rates of groundwater (11.1 l/s, 4.65 l/s, 6.49 l/s, 42 l/s). The region of Mthatha, nearly surrounding the Amatole-Swaziland axis (former Ciskei-Swaziland iv axis) of uplift which might have generated some new faults, has a number of springs. These two regions should serve as case studies for future research. Apart from these two regions, two others regions can be considered as case studies for future groundwater exploration targets: the Bath Farm hot spring near the Fort Beaufort neotectonic fault and the vicinity of what is known as the Fort Beaufort fracture near Teba and Cimezile villages 20km north west of Fort Beaufort. It is concluded that the study of neotectonics and stress fields may be a useful tool for groundwater exploration in the Karoo fractured aquifers in the Eastern Cape, and in similar regions elsewhere in South Africa and in Africa.
|
4 |
The implementation of the water release module of the WAS program at the Vaalharts Water Users' AssociationJansen van Vuuren, Arno January 2008 (has links)
Thesis (M. Tech) - Central University of Technology, Free State, 2008 / Food and water are two basic human needs. International projections indicate that water shortages will be prevalent among poorer countries where resources are limited and population growth is rapid, such as the Middle East, parts of Asia and Africa. Provisional estimates are that South Africa will run out of surplus usable water by 2025, or soon thereafter. Urban and peri-urban areas will therefore require new infrastructure and inter-basin transfers to provide safe water and adequate sanitation. Due to the high cost of these developments, such water is seen as being used for industrial and public needs only and not for irrigation. Currently, the agricultural water users consume the majority of the water used by humans. Taking cognisance of the before mentioned it is a reality that in the future the irrigation sector will have to sacrifice some of its water for public and industrial usage. This suggests growing conflict between the different water users and the agricultural water users. An attempt by the Department of Water Affairs and Forestry (DWAF) to address this conflict has been the implementation of pilot studies to determine the steps
Water User Associations (WUAs) could take to ensure more effective water use in the future by the agricultural sector. These steps include an increase in irrigation efficiency according to the benchmarks of crop irrigation requirements and more efficient dam and canal management. The Water Administration System (WAS) has been developed to fulfill this exact requirement as it ensures optimal delivery of irrigation water on demand. The program is designed as a management tool for irrigation schemes, WUAs and water management offices to manage their accounts, and also to manage water supply to clients more efficiently through canal networks, pipelines and rivers. The WAS program consists of four modules that are integrated into a single program. Three modules of the WAS program have already been implemented at the Vaalharts irrigation scheme. This scheme has been transformed from a government controlled scheme to a privately owned scheme, and is now known as the Vaalharts Water User’s Association (VHWUA). The main purpose of this study was to implement the fourth module of the WAS program at the VHWUA as only full functionality of the complete program will ensure effective water use at the scheme.
The fourth module calculates the volume of water to be released for all the canals (main canal and all its branches), allowing for lag times, water losses and accruals in order to minimise waste and thus save water. The methodology followed in this study was to first of all develop an understanding of the distribution cycle and the current calculation procedure of the VHWUA. The fourth module was then applied on a typical feeder canal and used to calculate the release volumes in order to compare these results with the current values. The next step was then to verify all data abstracted from the database used by the WAS program to calculate the release volumes. The database consists of information like cross-sectional properties, positioning of the sluices, canal slope, as well as canal capacities. The verification of data was done by field work, by studying existing engineering design drawings, through meetings and consultations with all parties involved in the VHWUA as well as by mathematical calculations. Cross-checking and verification, if necessary, of all above mentioned data were done. After the verification process, the database was updated and another cycle of calculations were run to do the final calibrations. Accurate calibrations were done to the seepage and the lag time coefficient. Some final adjustments were also made to the canal geometry in the database. This was an important part of the study as only a trusted and verified database will deliver correct results, irrespective of the software program used.
After calibration of the database, the fourth module was again applied, but this time water losses were included in the calculations and the results revealed trustworthy and accurate real-time release volumes. The study therefore succeeded in the implementation of the fourth module on a typical feeder canal at the VHWUA. The study was concluded by the compilation of a checklist, which the VHWUA can use to implement the module on the whole scheme. This would enable the VHWUA to implement and apply the complete WAS program, which offers all the benefits and answers in every need of any water management office. Sustainable water resource utilisation can only be achieved through proper management. Applying this most effective management program will ensure a cost effective and optimised process at the VHWUA.
|
Page generated in 0.119 seconds