Thesis (Sc.D.)--Massachusetts Institute of Technology, Dept. of Civil Engineering, 1980. / MICROFICHE COPY AVAILABLE IN ARCHIVES AND ENGINEERING. / Includes bibliographies. / by Mostafa Ameen Foda. / Sc.D.

No description available.

A new wave-kinetic numerical method for the propagation of optical waves in weakly inhomogeneous media is discussed, and it is applied to several canonical problems: the propagation of beam and plane waves through a weak 3-D ( or 2-D ) Gaussian eddy. The numerical results are also compared to those from a Monte-Carlo simulation and the first Born approximation. Within the validity of the Liouville approximation, the Wigner distribution function ( WDF ) is conserved along the conventional ray trajectories, and, thus, by discretizing the input WDF with Gaussian beamlets, we can represent the output WDF as a sum of Gaussians, from which irradiance can be obtained by analytical integration of each Gaussian with respect to wavevector. Although each Gaussian beamlet propagates along a geometrical optics ray trajectory, it can correctly describe diffraction effects, and the propagation of optical waves through caustics or ray crossings. The numerical results agree well with either the Monte-Carlo method or the first Born approximation in regions where one or both of these are expected to be valid. / M.S.

No description available.

The present research is concerned with developing analysis methods for analyzing and exploring finite-amplitude elastic wave propagation through periodic media. Periodic arrangements of materials with high acoustic impedance contrasts can be employed to control wave propagation. These systems are often termed phononic crystals or metamaterials, depending on the specific design and purpose. Design of these systems usually relies on computation and analysis of dispersion band structures which contain information about wave propagation speed and direction. The location and influence of complete (and partial) band gaps is a particularly interesting characteristic. Wave propagation is prohibited for frequencies that correspond to band gaps; thus, periodic systems behave as filters, wave guides, and lenses at certain frequencies. Controlling these behaviors has typically been limited to the manufacturing stage or the application of external stimuli to distort material configurations. The inclusion of nonlinear elements in periodic unit cells offers an option for passive tuning of the dispersion band structure through amplitude-dependence. Hence, dispersion analysis methods which may be utilized in the design of nonlinear phononic crystals and metamaterials are required. The approach taken herein utilizes Bloch wave-based perturbation analysis methods for obtaining closed-form expressions for dispersion amplitude-dependence. The influence of material and geometric nonlinearities on the dispersion relationship is investigated. It is shown that dispersion shifts result from both self-action (monochromatic excitation) and wave-interaction (multi-frequency excitation), the latter enabling dynamic anisotropy in periodic media. A particularly novel aspect of this work is the ease with which band structures of discretized systems may be analyzed. This connection enables topology optimization of unit cells with nonlinear elements. Several important periodic systems are considered including monoatomic lattices, multilayer materials, and plane stress matrix-inclusion configurations. The analysis methods are further developed into a procedure which can be implemented numerically with existing finite-element analysis software for analyzing geometrically-complex materials.

A 6-Degree Of Freedom (DOF) numeric model and computer simulation along with the 1/10th scale physical model of the Rapidly Deployable Stable Platform (RDSP) are being developed at Florida Atlantic University in response to military needs for ocean platforms with improved sea keeping characteristics. The RDSP is a self deployable spar platform with two distinct modes of operation enabling long distance transit and superior seakeeping. The focus of this research is the development of a Dynamic Position (DP) and motion mitigation system for the RDSP. This will be accomplished though the validation of the mathematical simulation, development of a novel propulsion system, and implementation of a PID controller. The result of this research is an assessment of the response characteristics of the RDSP that quantifies the performance of the propulsion system coupled with active control providing a solid basis for further controller development and operational testing. / by Sean P. Marikle. / Thesis (M.S.C.S.)--Florida Atlantic University, 2009. / Includes bibliography. / Electronic reproduction. Boca Raton, Fla., 2009. Mode of access: World Wide Web.

Vertebrates are the most prodigious vocalizing animals in existence, and the most diverse methods of acoustic communication among vertebrates can be found in the ocean. Relatively many teleost fish are gifted with the ability to communicate acoustically, and the family of serranidae often performs this as a function of the swim bladder. Epinephelus Guttatus (E. guttatus), or more commonly the red hind grouper, is equipped with a drum shaped swim bladder acting as a monopole under typical ocean conditions. This configuration allows for what is understood to be omnidirectional projection of tones approximately centered between 40 and 440 Hz and spanning anywhere from 40 to 200 Hz of bandwidth and modulation effects based on observed data provided by researchers. Prior studies on many other fish show correlation in acoustic communication profile with length, size and sexual identity. In the red hind, sexual dimorphism leads to an inherent female identity in all juvenile fish which converts to male according to environmental factors, recommending at least consistent organs across both sexes be assumed even if not in use. Much research has been performed on male fish vocalization in terms of spectral content. Communication in fish is a complex multi-modal process, with acoustic communication being important for many of the species, particularly those in the littoral regions of the worlds’ oceans. If identifying characteristics of the red hind vocalization can be isolated based on detection, classification, tracking and localizing methodologies, then these identifying characteristics may indeed lead to passive feature identification that allows for estimation of individual fish mass. Hypotheses based on vector, cyclostationary and classical tonal mechanics are presented for consideration. A battery of test data collection events, applying pre-recorded fish vocalizations to a geolocated undersea sound source were conducted. The results are supplied with the intent of validating hypothesis in a non-expert system manner that shows how a series of biological metrics may be assessed for detection, classification, localization and mass estimation for an individual vocalizing red hind grouper / Includes bibliography. / Dissertation (Ph.D.)--Florida Atlantic University, 2017. / FAU Electronic Theses and Dissertations Collection

A motion compensated ADV system was evaluated to determine its ability to make measurements necessary for characterizing the variability of the ambient current in the Gulf Stream. The impact of IMU error relative to predicted turbulence spectra was quantified, as well as and the ability of the motion compensation approach to remove sensor motion from the ADV measurements. The presented data processing techniques are shown to allow the evaluated ADV to be effectively utilized for quantifying ambient current fluctuations from 0.02 to 1 Hz (50 to 1 seconds) for dissipation rates as low as 3x10-7. This measurement range is limited on the low frequency end by IMU error, primarily by the calculated transformation matrix, and on the high end by Doppler noise. Inshore testing has revealed a 0.37 Hz oscillation inherent in the towfish designed and manufactured as part of this project, which can nearly be removed using the IMU. / Includes bibliography. / Thesis (M.S.)--Florida Atlantic University, 2014. / FAU Electronic Theses and Dissertations Collection

Accurate modeling and simulation of wave propagation in dispersive dielectrics such as water, human tissue and sand, among others, has a variety of applications. For example in medical imaging, electromagnetic waves are used to interrogate human tissue in a non-invasive manner to detect anomalies that could be cancerous. In non-destructive evaluation of materials, such interrogation is used to detect defects in these materials. In this thesis we present the construction and analysis of two novel operator splitting methods for Maxwell's equations in dispersive media of Debye type which are used to model wave propagation in polar materials like water and human tissue. We construct a sequential and a symmetrized operator splitting scheme which are first order, and second order, respectively, accurate in time. Both schemes are second order accurate in space. The operator splitting methods are shown to be unconditionally stable via energy techniques. Their accuracy and stability properties are compared to established schemes like the Yee or FDTD scheme and the Crank-Nicolson scheme. Finally, results of numerical simulations are presented that confirm the theoretical analysis. / Graduation date: 2012 / Access restricted to the OSU Community at author's request from June 20, 2012 - Dec. 20, 2012

Many hydrocarbon reservoirs have sufficient porosity but low permeability (for example, tight gas sands and coal beds). However, such reservoirs are often naturally fractured. The fracture patterns in these reservoirs can control flow and transport properties, and therefore, play an important role in drilling production wells. On the scale of seismic wavelengths, closely spaced parallel fractures behave like an anisotropic media, which precludes the response of individual fractures in the seismic data. There are a number of fracture parameters which are needed to fully characterize a fractured reservoir. However, seismic data may reveal only certain fracture parameters and those are fracture orientation, crack density and fracture infill. Most of the widely used fracture characterization methods such as Swave splitting analysis or amplitude vs. offset and azimuth (AVOA) analysis fail to render desired results in laterally varying media. I have conducted a systematic study of the response of fractured reservoirs with laterally varying elastic and fracture properties, and I have developed a scheme to invert for the fracture parameters. I have implemented a 3D finite-difference method to generate multicomponent synthetic seismic data in general anisotropic media. I applied the finite-difference algorithm in both Standard and Rotated Staggered grids. Standard Staggered grid is used for media having symmetry up to orthorhombic (isotropic, transversely isotropic, and orthorhombic), whereas Rotated Staggered grid is implemented for monoclinic and triclinic media. I have also developed an efficient and accurate ray-bending algorithm to compute seismic traveltimes in 3D anisotropic media. AVOA analysis is equivalent to the first-order Born approximation. However, AVOA analysis can be applied only in a laterally uniform medium, whereas the Born-approximation does not pose any restriction on the subsurface structure. I have developed an inversion scheme based on a ray-Born approximation to invert for the fracture parameters. Best results are achieved when both vertical and horizontal components of the seismic data are inverted simultaneously. I have also developed an efficient positivity constraint which forbids the inverted fracture parameters to be negative in value. I have implemented the inversion scheme in the frequency domain and I show, using various numerical examples, that all frequency samples up to the Nyquist are not required to achieve desired inversion results.