Spelling suggestions: "subject:"liebe actionfunction"" "subject:"liebe functionaction""
1 |
Cylinder-by-Cylinder Torque Model of an SI-Engine for Real-Time Applications / Cylinderindividuell Momentmodell för RealtidstillämpningarHashemzadeh Nayeri, Mohit January 2005 (has links)
<p>In recent years Hardware-in-the-Loop HiL, has gained more and more</p><p>popularity within the vehicle industry. This is a more cost effective research alternative, as opposed to the tests done the traditional way, since in HiL testing the idea is to test the hardware of interest, such as an electronic control unit, in a simulated (or partially simulated) environment which closely resembles the real-world environment.</p><p>This thesis is ordered by Daimler Chrysler AG and the objective of this thesis is the developing of a cylinder-by-cylinder model for the purpose of emulation of misfire in a four-stroke SI-engine. This purpose does not demand a precise modelling of the cylinder pressure but rather an adequate modelling of position and amplitude of the torque produced by each cylinder. The model should be preferebly computaionally tractable so it can be run on-line. Therefore, simplifications are made such as assuming the rule of a homogenous mixture, pressure and temperature inside the cylinder at all steps, so the pressure model can be analytical and able to cope with the real-time demand of the HiL. The model is implemented in Simulink and simulated with different sample rates and an improvement is to be seen as the sample rate is decreased.</p>
|
2 |
Cylinder-by-Cylinder Torque Model of an SI-Engine for Real-Time Applications / Cylinderindividuell Momentmodell för RealtidstillämpningarHashemzadeh Nayeri, Mohit January 2005 (has links)
In recent years Hardware-in-the-Loop HiL, has gained more and more popularity within the vehicle industry. This is a more cost effective research alternative, as opposed to the tests done the traditional way, since in HiL testing the idea is to test the hardware of interest, such as an electronic control unit, in a simulated (or partially simulated) environment which closely resembles the real-world environment. This thesis is ordered by Daimler Chrysler AG and the objective of this thesis is the developing of a cylinder-by-cylinder model for the purpose of emulation of misfire in a four-stroke SI-engine. This purpose does not demand a precise modelling of the cylinder pressure but rather an adequate modelling of position and amplitude of the torque produced by each cylinder. The model should be preferebly computaionally tractable so it can be run on-line. Therefore, simplifications are made such as assuming the rule of a homogenous mixture, pressure and temperature inside the cylinder at all steps, so the pressure model can be analytical and able to cope with the real-time demand of the HiL. The model is implemented in Simulink and simulated with different sample rates and an improvement is to be seen as the sample rate is decreased.
|
3 |
Modely přestupu tepla a přívodu tepla pro zážehové motory / Heat transfer models for spark-ignition enginesPtáček, Martin January 2020 (has links)
The subject of this diploma thesis is the creation of a spark ignition thermodynamics model using pressure data measured on the actual engine. The model made in Matlab programming language combines Wiebe function for fuel energy release and Woschni correlation for heat transfer between in-cylinder gasses and cylinder walls. The created model contains compression and expansion stroke only, that's why are conditions at the start of compression and total heat addition calculated by measured pressure data from Skoda 1.0 MPI engine. Creation of transparent model by Matlab scripts enables other users to understand the basics of „zero-dimensional“ thermodynamics models properly, which are used by number of commercial solvers such as GT-Power simulation software. First part of this thesis deals with fundamental laws of heat addition and heat transfer, description of equations for its modelling and application. The major section is devoted to Matlab model, where defined input parameters are mentioned, description of model operation and model parameters influence study. Next parts develops issues of combustion pressure measurement and creation of engine simulation by GT-Power software used for comparison with Matlab model. In the thesis conclusion are simulations and actual engine data differences discussed.
|
Page generated in 0.0598 seconds