This thesis assessed the use of radar as a remote technique for monitoring seabirds in offshore locations.  The study site was in the Moray Firth, Scotland, at the Beatrice oil field, where two 5 MW wind turbines were installed in the summers of 2006 and 2007.  An S-band marine surveillance radar, equipped with commercially available automatic detection and tracking software was installed on the Beatrice Alpha platform to collect ornithological data.  Significant amounts of radar clutter were also recorded in this offshore environment, so bespoke filters were developed, to remove non-avian tracks from the dataset.  Filtered data showed temporal patterns in avian activity at the site, which could be linked to existing knowledge of the use of the site by seabirds.  Flight directions during the breeding season indicated that birds using the site were also attending colonies at the East Caithness cliffs SPA to the north west.  The flight speed parameter included in models of collision between birds and wind turbines was evaluated empirically using radar data.  Ground speed, which is influenced by wind was  highly variable, and was on average 0.707 ms^-1 slower than airspeed, increasing the collisions risk relative to the model’s predictions for many birds. Boat-based visual surveys were used to investigate the impact of turbine installation on the abundance and distribution of birds at the site during the breeding season.  No effect of turbine installation was detected, but environmental variation was shown to have a significant impact on bird abundance.  This demonstrates the difficulty of designing impact studies that can detect the faint signal of an impact, against background variability inherent in marine environments.

Recent advances in innovative energy storage devices such as supercapacitors have made battery-supercapacitor hybrid energy storage systems technically attractive. However the field of hybrid energy storage system control is relatively new, involving the major challenge of developing control techniques optimised for improved battery-life or other performance metrics. This thesis presents the design and analysis of an actively controlled hybrid energy storage system. Detailed information is given regarding the system implementation and dynamic controls developed as a part of the research. Novel use of the sliding-mode or hysteretic current-controlled DC/DC converter is shown to provide a versatile and robust power electronic building block for the power-control hardware implementation. Current state of the art in the field has converged around a frequency-domain approach to the overall power sharing strategy within hybrid energy storage systems employing batteries and high-power, low-energy density storage such as supercapacitors, with benefits in terms of reduced battery current maxima and an (un-quantified) increase in battery life having been reported. This research extends previous studies by considering the frequency-domain approach in further detail and providing quantitative simulation results confirming how an estimated increase in battery cycle-life of ~18% can be achieved. A systematic simulation framework used for the development and assessment of novel hybrid energy storage system control strategies is described and demonstrated in the context of a remote wind power application. The hardware design of all systems considered is described in detail and demonstrated by experiment.

Fossil fuel will eventually become exhausted. Also, fossil fuels produce large amounts of carbon dioxide, which cannot only bring environment pollution, but can also cause global warming. Therefore, clean and renewable energy sources should be investigated. In this project, renewable wind power was considered. Wind energy is free, clean and available in large quantities, although it is difficult to use due to its stochastic variability. Energy storage can reduce this variability allowing energy production to match energy demand. In this study, different kinds of energy storage approaches were introduced, compared, and simulated by using half hourly wind data from the Met Office, UK, and half hourly load data from the University of Bath, UK. Hydrogen has higher mass energy density than all other energy storage methods. It is seen as a versatile energy carrier of the future, complementary to electricity and with the potential to replace fossil fuels due to its zero carbon emissions and abundance in nature. On the other hand, because hydrogen is the lightest element under normal conditions; the same amount of hydrogen must occupy a huge volume compared to other elements. The mature technology for converting hydrogen into electricity has high cost and low efficiency. These are big issues that limit the usage of hydrogen energy storage methods. Using wind and load data, a new algorithm was developed and used for sizing the wind turbine, and energy storage requirements. The traditional way to supply energy is distributing electricity, but in this PhD research, there are some discussions about a new method, hydrogen transport-hydrogen pipeline. From the results of the comparison and algorithm, a practical hydrogen energy storage system for the University of Bath network was proposed and designed. In the proposed design the energy from a wind turbine was directed to the load and the remaining excess power was used to produce hydrogen by water electrolysis. The hydrogen was stored in a high pressure compressed tank, and finally a hydrogen fuelled combined cycle gas turbine was used to convert the hydrogen to electricity. In this thesis, the dynamics of the complete hydrogen cycle energy storage and recovery mechanism are discussed, identifying potential applications such as power smoothing, peak lopping and extending power system controller ranges. The results of calculations of the payback time and revenue verify the feasibility of the designed hydrogen energy storage system. The main objective of the PhD was to design a practical hydrogen energy storage system for micro-grid applications. During this research, hydrogen energy storage was investigated to show that it does solve the problems arising from renewable energy.

Digitized by Kansas Correctional Industries

<p>The topic of this thesis is the study of energy storage systems operating with wind power plants. The motivation for applying energy storage in this context is that wind power generation is intermittent and generally difficult to predict, and that good wind energy resources are often found in areas with limited grid capacity. Moreover, energy storage in the form of hydrogen makes it possible to provide clean fuel for transportation. The aim of this work has been to evaluate how local energy storage systems should be designed and operated in order to increase the penetration and value of wind power in the power system. Optimization models and sequential and probabilistic simulation models have been developed for this purpose.</p><p>Chapter 3 presents a sequential simulation model of a general windhydrogen energy system. Electrolytic hydrogen is used either as a fuel for transportation or for power generation in a stationary fuel cell. The model is useful for evaluating how hydrogen storage can increase the penetration of wind power in areas with limited or no transmission capacity to the main grid. The simulation model is combined with a cost model in order to study how component sizing and choice of operation strategy influence the performance and economics of the wind-hydrogen system. If the stored hydrogen is not used as a separate product, but merely as electrical energy storage, it should be evaluated against other and more energy efficient storage options such as pumped hydro and redox flow cells. A probabilistic model of a grid-connected wind power plant with a general energy storage unit is presented in chapter 4. The energy storage unit is applied for smoothing wind power fluctuations by providing a firm power output to the grid over a specific period. The method described in the chapter is based on the statistical properties of the wind speed and a general representation of the wind energy conversion system and the energy storage unit. This method allows us to compare different storage solutions.</p><p>In chapter 5, energy storage is evaluated as an alternative for increasing the value of wind power in a market-based power system. A method for optimal short-term scheduling of wind power with energy storage has been developed. The basic model employs a dynamic programming algorithm for the scheduling problem. Moreover, different variants of the scheduling problem based on linear programming are presented. During on-line operation, the energy storage is operated to minimize the deviation between the generation schedule and the actual power output of the wind-storage system. It is shown how stochastic dynamic programming can be applied for the on-line operation problem by explicitly taking into account wind forecast uncertainty. The model presented in chapter 6 extends and improves the linear programming model described in chapter 5. An operation strategy based on model predictive control is developed for effective management of uncertainties. The method is applied in a simulation model of a wind-hydrogen system that supplies the local demand for electricity and hydrogen. Utilization of fuel cell heat and electrolytic oxygen as by-products is also considered. Computer simulations show that the developed operation method is beneficial for grid-connected as well as for isolated systems. For isolated systems, the method makes it possible to minimize the usage of backup power and to ensure a secure supply of hydrogen fuel. For grid-connected wind-hydrogen systems, the method could be applied for maximizing the profit from operating in an electricity market.</p><p>Comprehensive simulation studies of different example systems have been carried out to obtain knowledge about the benefits and limitations of using energy storage in conjunction with wind power. In order to exploit the opportunities for energy storage in electricity markets, it is crucial that the electrical efficiency of the storage is as high as possible. Energy storage combined with wind power prediction tools makes it possible to take advantage of varying electricity prices as well as reduce imbalance costs. Simulation results show that the imbalance costs of wind power and the electricity price variations must be relatively high to justify the installation of a costly energy storage system. Energy storage is beneficial for wind power integration in power systems with high-cost regulating units, as well as in areas with weak grid connection.</p><p>Hydrogen can become an economically viable energy carrier and storage medium for wind energy if hydrogen is introduced into the transportation sector. It is emphasized that seasonal wind speed variations lead to high storage costs if compressed hydrogen tanks are used for long-term storage. Simulation results indicate that reductions in hydrogen storage costs are more important than obtaining low-cost and high-efficient fuel cells and electrolyzers. Furthermore, it will be important to make use of the flexibility that the hydrogen alternative offers regarding sizing, operation and possibly the utilization of oxygen and heat as by-products.</p><p>The main scientific contributions from this thesis are the development of</p><p>- a simulation model for estimating the cost and energy efficiency of wind-hydrogen systems,</p><p>- a probabilistic model for predicting the performance of a gridconnected wind power plant with energy storage,</p><p>- optimization models for increasing the value of wind power in electricity markets by the use of hydrogen storage and other energy storage solutions and the system knowledge about wind energy and energy storage that has been obtained by the use of these models.</p> / Paper 1 is reprinted with kind permission of ACTA Press. Paper 2 is reprinted with kind permission of Elsevier/ Science Direct. http://www.elsevier.com, http://www.sciencedirect.com Paper 3 is reprinted with kind permission of IEEE.

<p>During our study trip to Tanzania we discovered one of the great issues for farmers to be need of running water. So we asked ourselves: How can water from Lake Victoria be transported to the small scale farmer’s household and farm in the most optimized way? During the stay in North West of Tanzania we made field trips to the rural areas in Mara Region in order to understand the farmers who are the potential users. We performed semi structured interviews and observations during the whole field study. We also came to the conclusion that wind is a good source of power which can be used to pump water. The wind comes in from Lake Victoria in the same direction everyday. So therefore we decided to construct a water pumping wind power station for small scale farmers.</p>

This thesis presents and examines the concept that the output of a wound-rotor induction generator (WRIG) can be limited by means of linking to external impedances for wind-turbine generating system application. An 80kW-WRIG is simulated as a model to examine the control of the output power vs. speed characteristic. Model of WRIG derived from per phase equivalent circuit is organized, then it is estimated how much external impedances affect the characteristic of output power for it to approach to a typical wind-turbine curve. Practical tests are performed using 80kW-WRIG in testing lab to validate the simulation data. In addition, a smaller WRIG, connected on same shaft as 80kW-WRIG, is designed to extend the range of wind speed. Also external impedances with smaller WRIG are chosen to extract optimum power from wind-turbine. Finally, passively controlled tandem WRIGs are shown to have the capability to optimize wind-turbine energy extraction when controlled entirely by external impedances. / Graduation date: 2003

The purpose of this work is to develop a maximum power tracking control strategy for variable speed wind turbine systems. Modern wind turbine control systems are slow, and they depend on the design parameters of the turbine and use wind and/or rotor speed measurements as control variable inputs. The dependence on the accuracy of the measurement devices makes the controller less reliable. The proposed control scheme is based on the stiff system concept and provides a fast response and a dynamic solution to the complicated aerodynamic system. This control scheme provides a response to the wind changes without the knowledge of wind speed and turbine parameters. The system consists of a permanent magnet synchronous machine (PMSM), a passive rectifier, a dc/dc boost converter, a current controlled voltage source inverter, and a microcontroller that commands the dc/dc converter to control the generator for maximum power extraction. The microcontroller will also be able to control the current output of the three-phase inverter. In this work, the aerodynamic characteristics of wind turbines and the power conversion system topology are explained. The maximum power tracking control algorithm with a variable step estimator is introduced and the modeling and simulation of the wind turbine generator system using the MATLAB/SIMULINK® software is presented and its results show, at least in principle, that the maximum power tracking algorithm developed is suitable for wind turbine generation systems.

The purpose of this work is to develop a maximum power tracking control strategy for variable speed wind turbine systems. Modern wind turbine control systems are slow, and they depend on the design parameters of the turbine and use wind and/or rotor speed measurements as control variable inputs. The dependence on the accuracy of the measurement devices makes the controller less reliable. The proposed control scheme is based on the stiff system concept and provides a fast response and a dynamic solution to the complicated aerodynamic system. This control scheme provides a response to the wind changes without the knowledge of wind speed and turbine parameters. The system consists of a permanent magnet synchronous machine (PMSM), a passive rectifier, a dc/dc boost converter, a current controlled voltage source inverter, and a microcontroller that commands the dc/dc converter to control the generator for maximum power extraction. The microcontroller will also be able to control the current output of the three-phase inverter. In this work, the aerodynamic characteristics of wind turbines and the power conversion system topology are explained. The maximum power tracking control algorithm with a variable step estimator is introduced and the modeling and simulation of the wind turbine generator system using the MATLAB/SIMULINK® software is presented and its results show, at least in principle, that the maximum power tracking algorithm developed is suitable for wind turbine generation systems.

The topic of this thesis is the study of energy storage systems operating with wind power plants. The motivation for applying energy storage in this context is that wind power generation is intermittent and generally difficult to predict, and that good wind energy resources are often found in areas with limited grid capacity. Moreover, energy storage in the form of hydrogen makes it possible to provide clean fuel for transportation. The aim of this work has been to evaluate how local energy storage systems should be designed and operated in order to increase the penetration and value of wind power in the power system. Optimization models and sequential and probabilistic simulation models have been developed for this purpose. Chapter 3 presents a sequential simulation model of a general windhydrogen energy system. Electrolytic hydrogen is used either as a fuel for transportation or for power generation in a stationary fuel cell. The model is useful for evaluating how hydrogen storage can increase the penetration of wind power in areas with limited or no transmission capacity to the main grid. The simulation model is combined with a cost model in order to study how component sizing and choice of operation strategy influence the performance and economics of the wind-hydrogen system. If the stored hydrogen is not used as a separate product, but merely as electrical energy storage, it should be evaluated against other and more energy efficient storage options such as pumped hydro and redox flow cells. A probabilistic model of a grid-connected wind power plant with a general energy storage unit is presented in chapter 4. The energy storage unit is applied for smoothing wind power fluctuations by providing a firm power output to the grid over a specific period. The method described in the chapter is based on the statistical properties of the wind speed and a general representation of the wind energy conversion system and the energy storage unit. This method allows us to compare different storage solutions. In chapter 5, energy storage is evaluated as an alternative for increasing the value of wind power in a market-based power system. A method for optimal short-term scheduling of wind power with energy storage has been developed. The basic model employs a dynamic programming algorithm for the scheduling problem. Moreover, different variants of the scheduling problem based on linear programming are presented. During on-line operation, the energy storage is operated to minimize the deviation between the generation schedule and the actual power output of the wind-storage system. It is shown how stochastic dynamic programming can be applied for the on-line operation problem by explicitly taking into account wind forecast uncertainty. The model presented in chapter 6 extends and improves the linear programming model described in chapter 5. An operation strategy based on model predictive control is developed for effective management of uncertainties. The method is applied in a simulation model of a wind-hydrogen system that supplies the local demand for electricity and hydrogen. Utilization of fuel cell heat and electrolytic oxygen as by-products is also considered. Computer simulations show that the developed operation method is beneficial for grid-connected as well as for isolated systems. For isolated systems, the method makes it possible to minimize the usage of backup power and to ensure a secure supply of hydrogen fuel. For grid-connected wind-hydrogen systems, the method could be applied for maximizing the profit from operating in an electricity market. Comprehensive simulation studies of different example systems have been carried out to obtain knowledge about the benefits and limitations of using energy storage in conjunction with wind power. In order to exploit the opportunities for energy storage in electricity markets, it is crucial that the electrical efficiency of the storage is as high as possible. Energy storage combined with wind power prediction tools makes it possible to take advantage of varying electricity prices as well as reduce imbalance costs. Simulation results show that the imbalance costs of wind power and the electricity price variations must be relatively high to justify the installation of a costly energy storage system. Energy storage is beneficial for wind power integration in power systems with high-cost regulating units, as well as in areas with weak grid connection. Hydrogen can become an economically viable energy carrier and storage medium for wind energy if hydrogen is introduced into the transportation sector. It is emphasized that seasonal wind speed variations lead to high storage costs if compressed hydrogen tanks are used for long-term storage. Simulation results indicate that reductions in hydrogen storage costs are more important than obtaining low-cost and high-efficient fuel cells and electrolyzers. Furthermore, it will be important to make use of the flexibility that the hydrogen alternative offers regarding sizing, operation and possibly the utilization of oxygen and heat as by-products. The main scientific contributions from this thesis are the development of - a simulation model for estimating the cost and energy efficiency of wind-hydrogen systems, - a probabilistic model for predicting the performance of a gridconnected wind power plant with energy storage, - optimization models for increasing the value of wind power in electricity markets by the use of hydrogen storage and other energy storage solutions and the system knowledge about wind energy and energy storage that has been obtained by the use of these models. / Paper 1 is reprinted with kind permission of ACTA Press. Paper 2 is reprinted with kind permission of Elsevier/ Science Direct. http://www.elsevier.com, http://www.sciencedirect.com Paper 3 is reprinted with kind permission of IEEE.