Smart home automation is the dwelling bridge of smart grid technology, as it integrates the modern home appliances power consumption information over communication networks in the smart grid system. Among all the appliances, Heating, Ventilation and Cooling (HVAC) systems is one of the most primary concerns. Since a great amount of power consumption is contributed by these HVAC systems. Traditionally, HVAC systems run at a fixed schedule without automatic monitoring and control systems, which causes load variation, fluctuations in the electricity demand and inefficient utility operation. In this thesis, we propose a Finite State Machine (FSM) system to model the air condition working status to acquire the relationship between temperature changing and cooling/heating duration. Finally, we introduce the Zigbee communciation protocol into the model, the performance analysis of the impact of end-to-end delay over HVAC systems is presented.

Wireless Sensor Networks (WSNs) are the commonly applied information technologies of modern networking and computing platforms for application-specific systems. Today’s network computing applications are faced with high demand of reliable and powerful network functionalities. Hence, efficient network performance is central to the entire ecosystem, more especially where human life is a concern. However, effective management of WSNs remains a challenge due to problems supplemental to them. As a result, WSNs application systems such as in monitored environments, surveillance, aeronautics, medicine, processing and control, tend to suffer in terms of capacity to support compute intensive services due to limitations experienced on them. A recent technology shift proposes Software Defined Networking (SDN) for improving computing networks as well as enhancing network resource management, especially for life guarding systems. As an optimization strategy, a software-oriented approach for WSNs, known as Software Defined Wireless Sensor Network (SDWSN) is implemented to evolve, enhance and provide computing capacity to these resource constrained technologies. Software developmental strategies are applied with the focus to ensure efficient network management, introduce network flexibility and advance network innovation towards the maximum operation potential for WSNs application systems. The need to develop WSNs application systems which are powerful and scalable has grown tremendously due to their simplicity in implementation and application. Their nature of design serves as a potential direction for the much anticipated and resource abundant IoT networks. Information systems such as data analytics, shared computing resources, control systems, big data support, visualizations, system audits, artificial intelligence (AI), etc. are a necessity to everyday life of consumers. Such systems can greatly benefit from the SDN programmability strategy, in terms of improving how data is mined, analysed and committed to other parts of the system for greater functionality. This work proposes and implements SDN strategies for enhancing WSNs application systems especially for life critical systems. It also highlights implementation considerations for designing powerful WSNs application systems by focusing on system critical aspects that should not be disregarded when planning to improve core network functionalities. Due to their inherent challenges, WSN application systems lack robustness, reliability and scalability to support high computing demands. Anticipated systems must have greater capabilities to ubiquitously support many applications with flexible resources that can be easily accessed. To achieve this, such systems must incorporate powerful strategies for efficient data aggregation, query computations, communication and information presentation. The notion of applying machine learning methods to WSN systems is fairly new, though carries the potential to enhance WSN application technologies. This technological direction seeks to bring intelligent functionalities to WSN systems given the characteristics of wireless sensor nodes in terms of cooperative data transmission. With these technological aspects, a technical study is therefore conducted with a focus on WSN application systems as to how SDN strategies coupled with machine learning methods, can contribute with viable solutions on monitoring application systems to support and provide various applications and services with greater performance. To realize this, this work further proposes and implements machine learning (ML) methods coupled with SDN strategies to; enhance sensor data aggregation, introduce network flexibility, improve resource management, query processing and sensor information presentation. Hence, this work directly contributes to SDWSN strategies for monitoring application systems. / Thesis (PhD)--University of Pretoria, 2018. / National Research Foundation (NRF) / Telkom Centre of Excellence / Electrical, Electronic and Computer Engineering / PhD / Unrestricted

Future and next-generation wireless networks are driven by the rapidly growing wireless traffic stemming from diverse services and applications, such as the Internet-of-Things (IoT), virtual reality, autonomous vehicles, and smart intersections. Many of these applications require massive connectivity between IoT devices as well as wireless access links with ultra-high bandwidth (Gbps or above) and ultra-low latency (10ms or less). Therefore, realizing the vision of future wireless networks requires significant research efforts across all layers of the network stack. In this thesis, we use a cross-layer approach and focus on several critical components of future wireless networks including IoT systems and full-duplex (FD) wireless, and on experimentation with advanced wireless technologies in the NSF PAWR COSMOS testbed. First, we study tracking and monitoring applications in the IoT and focus on ultra-low-power energy harvesting networks. Based on realistic hardware characteristics, we design and optimize Panda, a centralized probabilistic protocol for maximizing the neighbor discovery rate between energy harvesting nodes under a power budget. Via testbed evaluation using commercial off-the-shelf energy harvesting nodes, we show that Panda outperforms existing protocols by up to 3x in terms of the neighbor discovery rate. We further explore this problem and consider a general throughput maximization problem among a set of heterogeneous energy-constrained ultra-low-power nodes. We analytically identify the theoretical fundamental limits of the rate at which data can be exchanged between these nodes, and design the distributed probabilistic protocol, EconCast, which approaches the maximum throughput in the limiting sense. Performance evaluations of EconCast using both simulations and real-world experiments show that it achieves up to an order of magnitude higher throughput than Panda and other known protocols. We then study FD wireless - simultaneous transmission and reception at the same frequency - a key technology that can significantly improve the data rate and reduce communication latency by employing self-interference cancellation (SIC). In particular, we focus on enabling FD on small-form-factor devices leveraging the technique of frequency-domain equalization (FDE). We design, model, and optimize the FDE-based RF canceller, which can achieve >50dB RF SIC across 20MHz bandwidth, and experimentally show that our prototyped FD radios can achieve a link-level throughput gain of 1.85-1.91x. We also focus on combining FD with phased arrays, employing optimized transmit and receive beamforming, where the spatial degrees of freedom in multi-antenna systems are repurposed to achieve wideband RF SIC. Moving up in the network stack, we study heterogeneous networks with half-duplex and FD users, and develop the novel Hybrid-Greedy Maximum Scheduling (H-GMS) algorithm, which achieves throughput optimality in a distributed manner. Analytical and simulation results show that H-GMS achieves 5-10x better delay performance and improved fairness compared with state-of-the-art approaches. Finally, we described experimentation and measurements in the city-scale COSMOS testbed being deployed in West Harlem, New York City. COSMOS' key building blocks include software-defined radios, millimeter-wave radios, a programmable optical network, and edge cloud, and their convergence will enable researchers to remotely explore emerging technologies in a real world environment. We provide a brief overview of the testbed and focus on experimentation with advanced technologies, including the integrating of open-access FD radios in the testbed and a pilot study on converged optical-wireless x-haul networking for cloud radio access networks (C-RANs). We also present an extensive 28GHz channel measurements in the testbed area, which is a representative dense urban canyon environment, and study the corresponding signal-to-noise ratio (SNR) coverage and achievable data rates. The results of this part helped drive and validate the design of the COSMOS testbed, and can inform further deployment and experimentation in the testbed. In this thesis, we make several theoretical and experimental contributions to ultra-low-power energy harvesting networks and the IoT, and FD wireless. We also contribute to the experimentation and measurements in the COSMOS advanced wireless testbed. We believe that these contributions are essential to connect fundamental theory to practical systems, and ultimately to real-world applications, in future wireless networks.

The need to achieve extended service life by battery powered Wireless Sensor Networks (WSNs) requires new concepts and technqiues beyond the state-of-the-art low-power designs based on fixed hardware platforms or energy-efficient protocols. This thesis investigates reconfiguration techniques that enable sensor hardware to adapt its energy consumption to external dynamics, by means of Dynamic Voltage Scaling (DVS), Dynamic Modulation Scaling (DMS), and other related concepts. For sensor node-level reconfiguration, an integration of DVS and DMS techniques was proposed to minimize the total energy consumption. A dynamic time allocation algorithm was developed, demonstrating an average of 55% energy reduction. For network-level reconfiguration, a node activation technique was presented to reduce the cost of recharging energy-depleted sensor nodes. Network operation combined with node activation was modeled as a stochastic decision process, where the activation decisions directly affected the energy efficiency of the network. An experimental test bed based on the Imote2 sensor node platform was realized, which demonstrated energy reduction of up to 50%. Such energy saving can be effectively translated into prolonged service life of the sensor network.

Applications for Wireless Sensor Networks can be updated dynamically by means of wireless upgrade mechanisms. Current research efforts in wireless upgrade mechanisms for WSN have focused on transmitting application packets for upgrades via wireless medium. However, these schemes require significant overhead involved in sending and receiving application packets that affect the sensor operation, in addition to bringing the nodes down to reprogram and restart them. By designing applications in a way that allows dynamic functionality changes during operation, the overhead and sensor delays can be eliminated. Dynamically Controllable Application (DCA) is a novel scheme for designing WSN applications whose behavior can be rapidly and dynamically changed during operation. The results indicate that a veritable functionality change is achieved in a span of a few milliseconds.

No description available.

No description available.

No description available.

No description available.

No description available.