Borate can be a potential candidate to protect building envelope components from biodegradation as it has low toxicity and can penetrate wood without pressure treatment, even in the refractory species commonly used in construction industries as structural components. In this research, wood moisture content, grain direction, formulation and species that affect the diffusion of borate in refractory species were investigated. Two highly concentrated formulations were applied and a novel approach (borate bandage) was used to keep the preservative on the surface and enhance the diffusion by reducing surface drying. From ANOVA test for different diffusion periods and depths of penetration, it was found that grain directions and moisture content are significant factors. A mould test was performed, the diffusion co-efficients were calculated and some recommendations were made about the quantity required to protect a specific volume of wood considering the distance moved by diffusion and volume treated in different directions.

Borate can be a potential candidate to protect building envelope components from biodegradation as it has low toxicity and can penetrate wood without pressure treatment, even in the refractory species commonly used in construction industries as structural components. In this research, wood moisture content, grain direction, formulation and species that affect the diffusion of borate in refractory species were investigated. Two highly concentrated formulations were applied and a novel approach (borate bandage) was used to keep the preservative on the surface and enhance the diffusion by reducing surface drying. From ANOVA test for different diffusion periods and depths of penetration, it was found that grain directions and moisture content are significant factors. A mould test was performed, the diffusion co-efficients were calculated and some recommendations were made about the quantity required to protect a specific volume of wood considering the distance moved by diffusion and volume treated in different directions.

Log breakdown by sawing can be viewed as a multi-phase process that converts logs into boards by a series of cutting operations. In the primary phase, logs are sawn into s labs of wood known as flitches or cants. These are further processed by secondary operations, that resaw, edge (cut lengthwise) and trim (cut widthwise) the raw material, resulting in the manufacture of the board product whose value is influenced by its composite dimensions and quality (as indicated by a grade). Board grade is in turn determined by the number, type, size, and location of defects. Owing to its biological origins, each log, and subsequent board, is unique. Furthermore, as each sawmill, and processing centre within the mill, has a unique configuration, the problem of determining how each log entering a mill should be sawn is very complex. Effective computer simulation of log breakdown processes must therefore entail detailed descriptions of both geometry and quality of individual logs. Appropriate strategies at each breakdown phase are also required. In this thesis models for emulating log breakdown are developed in conjunction with an existing sawing simulation system which requires, as input, detailed three-dimensional descriptions of both internal and external log characteristics. Models based on heuristic and enumerative procedures, and those based upon the principles of dynamic programming (DP) are formulated, encoded, and compared. Log breakdown phases are considered both independently and in a combined integrated approach-working backwards from the board product through to the primary log breakdown phase. This approach permits methodology developed for the later processes to be embedded within the primary phase thus permitting the determination of a global rather than local solution to the log breakdown problem whose objective is to seek the highest possible solution quality within the minimum possible time. Simulation results indicate that solution quality and processing speeds are influenced by both solution methodology and degree of data complexity. When the structure of either factor is simplified, solutions are generated more rapidly-but with an accompanying reduction in solution quality. A promising compromise that combines DP techniques with mathematical functions based on a subset of the original data is presented. / Subscription resource available via Digital Dissertations only.

Log breakdown by sawing can be viewed as a multi-phase process that converts logs into boards by a series of cutting operations. In the primary phase, logs are sawn into s labs of wood known as flitches or cants. These are further processed by secondary operations, that resaw, edge (cut lengthwise) and trim (cut widthwise) the raw material, resulting in the manufacture of the board product whose value is influenced by its composite dimensions and quality (as indicated by a grade). Board grade is in turn determined by the number, type, size, and location of defects. Owing to its biological origins, each log, and subsequent board, is unique. Furthermore, as each sawmill, and processing centre within the mill, has a unique configuration, the problem of determining how each log entering a mill should be sawn is very complex. Effective computer simulation of log breakdown processes must therefore entail detailed descriptions of both geometry and quality of individual logs. Appropriate strategies at each breakdown phase are also required. In this thesis models for emulating log breakdown are developed in conjunction with an existing sawing simulation system which requires, as input, detailed three-dimensional descriptions of both internal and external log characteristics. Models based on heuristic and enumerative procedures, and those based upon the principles of dynamic programming (DP) are formulated, encoded, and compared. Log breakdown phases are considered both independently and in a combined integrated approach-working backwards from the board product through to the primary log breakdown phase. This approach permits methodology developed for the later processes to be embedded within the primary phase thus permitting the determination of a global rather than local solution to the log breakdown problem whose objective is to seek the highest possible solution quality within the minimum possible time. Simulation results indicate that solution quality and processing speeds are influenced by both solution methodology and degree of data complexity. When the structure of either factor is simplified, solutions are generated more rapidly-but with an accompanying reduction in solution quality. A promising compromise that combines DP techniques with mathematical functions based on a subset of the original data is presented. / Subscription resource available via Digital Dissertations only.

Log breakdown by sawing can be viewed as a multi-phase process that converts logs into boards by a series of cutting operations. In the primary phase, logs are sawn into s labs of wood known as flitches or cants. These are further processed by secondary operations, that resaw, edge (cut lengthwise) and trim (cut widthwise) the raw material, resulting in the manufacture of the board product whose value is influenced by its composite dimensions and quality (as indicated by a grade). Board grade is in turn determined by the number, type, size, and location of defects. Owing to its biological origins, each log, and subsequent board, is unique. Furthermore, as each sawmill, and processing centre within the mill, has a unique configuration, the problem of determining how each log entering a mill should be sawn is very complex. Effective computer simulation of log breakdown processes must therefore entail detailed descriptions of both geometry and quality of individual logs. Appropriate strategies at each breakdown phase are also required. In this thesis models for emulating log breakdown are developed in conjunction with an existing sawing simulation system which requires, as input, detailed three-dimensional descriptions of both internal and external log characteristics. Models based on heuristic and enumerative procedures, and those based upon the principles of dynamic programming (DP) are formulated, encoded, and compared. Log breakdown phases are considered both independently and in a combined integrated approach-working backwards from the board product through to the primary log breakdown phase. This approach permits methodology developed for the later processes to be embedded within the primary phase thus permitting the determination of a global rather than local solution to the log breakdown problem whose objective is to seek the highest possible solution quality within the minimum possible time. Simulation results indicate that solution quality and processing speeds are influenced by both solution methodology and degree of data complexity. When the structure of either factor is simplified, solutions are generated more rapidly-but with an accompanying reduction in solution quality. A promising compromise that combines DP techniques with mathematical functions based on a subset of the original data is presented. / Subscription resource available via Digital Dissertations only.

Log breakdown by sawing can be viewed as a multi-phase process that converts logs into boards by a series of cutting operations. In the primary phase, logs are sawn into s labs of wood known as flitches or cants. These are further processed by secondary operations, that resaw, edge (cut lengthwise) and trim (cut widthwise) the raw material, resulting in the manufacture of the board product whose value is influenced by its composite dimensions and quality (as indicated by a grade). Board grade is in turn determined by the number, type, size, and location of defects. Owing to its biological origins, each log, and subsequent board, is unique. Furthermore, as each sawmill, and processing centre within the mill, has a unique configuration, the problem of determining how each log entering a mill should be sawn is very complex. Effective computer simulation of log breakdown processes must therefore entail detailed descriptions of both geometry and quality of individual logs. Appropriate strategies at each breakdown phase are also required. In this thesis models for emulating log breakdown are developed in conjunction with an existing sawing simulation system which requires, as input, detailed three-dimensional descriptions of both internal and external log characteristics. Models based on heuristic and enumerative procedures, and those based upon the principles of dynamic programming (DP) are formulated, encoded, and compared. Log breakdown phases are considered both independently and in a combined integrated approach-working backwards from the board product through to the primary log breakdown phase. This approach permits methodology developed for the later processes to be embedded within the primary phase thus permitting the determination of a global rather than local solution to the log breakdown problem whose objective is to seek the highest possible solution quality within the minimum possible time. Simulation results indicate that solution quality and processing speeds are influenced by both solution methodology and degree of data complexity. When the structure of either factor is simplified, solutions are generated more rapidly-but with an accompanying reduction in solution quality. A promising compromise that combines DP techniques with mathematical functions based on a subset of the original data is presented. / Subscription resource available via Digital Dissertations only.

Log breakdown by sawing can be viewed as a multi-phase process that converts logs into boards by a series of cutting operations. In the primary phase, logs are sawn into s labs of wood known as flitches or cants. These are further processed by secondary operations, that resaw, edge (cut lengthwise) and trim (cut widthwise) the raw material, resulting in the manufacture of the board product whose value is influenced by its composite dimensions and quality (as indicated by a grade). Board grade is in turn determined by the number, type, size, and location of defects. Owing to its biological origins, each log, and subsequent board, is unique. Furthermore, as each sawmill, and processing centre within the mill, has a unique configuration, the problem of determining how each log entering a mill should be sawn is very complex. Effective computer simulation of log breakdown processes must therefore entail detailed descriptions of both geometry and quality of individual logs. Appropriate strategies at each breakdown phase are also required. In this thesis models for emulating log breakdown are developed in conjunction with an existing sawing simulation system which requires, as input, detailed three-dimensional descriptions of both internal and external log characteristics. Models based on heuristic and enumerative procedures, and those based upon the principles of dynamic programming (DP) are formulated, encoded, and compared. Log breakdown phases are considered both independently and in a combined integrated approach-working backwards from the board product through to the primary log breakdown phase. This approach permits methodology developed for the later processes to be embedded within the primary phase thus permitting the determination of a global rather than local solution to the log breakdown problem whose objective is to seek the highest possible solution quality within the minimum possible time. Simulation results indicate that solution quality and processing speeds are influenced by both solution methodology and degree of data complexity. When the structure of either factor is simplified, solutions are generated more rapidly-but with an accompanying reduction in solution quality. A promising compromise that combines DP techniques with mathematical functions based on a subset of the original data is presented. / Subscription resource available via Digital Dissertations only.

A number of fungi produce spalted wood, which is characterized by accumulation of black pigment in fine demarcation lines, often accompanied by discoloration or staining on the wood fibers. Specific spalting fungi were identified by molecular analysis. From a total of 19 isolates and 140 clones studied, 11 fungal species were identified. The two Chlorociboria species from North America were investigated and their anamorphs were unambiguously identified for the first time. Fungal pigment formation under the influence of moisture content and pH variation was investigated in sugar maple, American beech and agar inoculated with spalting fungi. Maximum pigment production occurred at treatment with pH 4.5 for sugar maple and beech inoculated with Trametes versicolor. Xylaria polymorpha produced external pigmentation in beech treated with buffer at pH 5 and sugar maple at pH 4.5. Fungal pigmentation by Trametes versicolor and Xylaria polymorpha was stimulated at low moisture content in both wood species tested. Melanin production by Inonotus hispidus and Polyporus squamosus was stimulated above 22-28% and 34-38% moisture content in beech and in sugar maple respectively. Fomes fomentarius and Polyporus brumalis produced maximum pigmentation in beech at 26 - 41% and in sugar maple at 59 - 96% moisture content. The variation of the moisture content and pH values of wood substrates can stimulate the intensity of pigmentation of specific fungi in wood. To investigate melanin synthesis from a variety of melanin precursors, experimental research on three spalting fungi tested their reaction to catechol and L-Dopa melanin precursors in wood and agar substrate. The results indicate multiple biosynthesis pathways for melanin assembly in Trametes versicolor, Xylaria polymorha and Inonotus hispidus, and catechol produced most pigmentation in all spalting fungi investigated. Microscopic analysis by light, fluorescence, electron and confocal microscopy also indicates a bi- or multi-modal activity of melanin production and assembly by several spalting fungi. Possible variations of melanin assembly were identified based on fungal and wood species. Immunofluorescence and immunogold labelling with Mab 6D2 melanin antibody confirmed the melanin nature of the pigments produced by Oxyporus populinus, Trametes versicolor, Xylaria polymorpha, Fomes fomentarius, and Inonotus hispidus.

A number of fungi produce spalted wood, which is characterized by accumulation of black pigment in fine demarcation lines, often accompanied by discoloration or staining on the wood fibers. Specific spalting fungi were identified by molecular analysis. From a total of 19 isolates and 140 clones studied, 11 fungal species were identified. The two Chlorociboria species from North America were investigated and their anamorphs were unambiguously identified for the first time. Fungal pigment formation under the influence of moisture content and pH variation was investigated in sugar maple, American beech and agar inoculated with spalting fungi. Maximum pigment production occurred at treatment with pH 4.5 for sugar maple and beech inoculated with Trametes versicolor. Xylaria polymorpha produced external pigmentation in beech treated with buffer at pH 5 and sugar maple at pH 4.5. Fungal pigmentation by Trametes versicolor and Xylaria polymorpha was stimulated at low moisture content in both wood species tested. Melanin production by Inonotus hispidus and Polyporus squamosus was stimulated above 22-28% and 34-38% moisture content in beech and in sugar maple respectively. Fomes fomentarius and Polyporus brumalis produced maximum pigmentation in beech at 26 - 41% and in sugar maple at 59 - 96% moisture content. The variation of the moisture content and pH values of wood substrates can stimulate the intensity of pigmentation of specific fungi in wood. To investigate melanin synthesis from a variety of melanin precursors, experimental research on three spalting fungi tested their reaction to catechol and L-Dopa melanin precursors in wood and agar substrate. The results indicate multiple biosynthesis pathways for melanin assembly in Trametes versicolor, Xylaria polymorha and Inonotus hispidus, and catechol produced most pigmentation in all spalting fungi investigated. Microscopic analysis by light, fluorescence, electron and confocal microscopy also indicates a bi- or multi-modal activity of melanin production and assembly by several spalting fungi. Possible variations of melanin assembly were identified based on fungal and wood species. Immunofluorescence and immunogold labelling with Mab 6D2 melanin antibody confirmed the melanin nature of the pigments produced by Oxyporus populinus, Trametes versicolor, Xylaria polymorpha, Fomes fomentarius, and Inonotus hispidus.