Spelling suggestions: "subject:"Y zeolite"" "subject:"Y eolite""
1 |
Generation and characterisation of catalytic films of zeolite Y and ZSM-5 on FeCrAlloy metalAl-Rubaye, Rana January 2013 (has links)
The objective of this work was the development of structured zeolite catalysts by growing of ZSM-5 and Y zeolites layers on the pre-treated FeCrAlloy wires, which could now offer technical advantage in catalytic application. The advantages of implementation of zeolitic coatings in industrial applications are that they have; lower pressure drop, high heat and mass transfer rates compared to standard pelleted or extruded catalysts. The key focus of this research was the generation of thin films of zeolite ZSM–5 and Y zeolite catalysts on the surface of a FeCrAlloy metal substrate. Using in-situ hydrothermal synthesis, the influence of the synthesis parameters such as substrate oxidation and crystallisation time on the zeolite crystallisation process in both the bulk phase (powder) and on the structured zeolite was studied and optimised. Then powder and structured Na-ZSM-5 and Na-Y were treated by calcination and ion exchange in post-synthesis treatment. Further post-synthesis modification was required in the zeolite Y case to improve the catalytic properties. The post synthetic modification of zeolite Y was carried out using acidified ammonium nitrate which was optimised to produce dealuminated zeolite Y with good crystallinity and a Si/Al = 8. Characterisation was performed after each stage of this work to optimise catalyst development using XRD, SEM, EDAX, BET, MAS-NMR, and TGA. Once the optimised zeolite Y and ZSM-5 structured catalysts prepared, cracking of n-heptane was carried out to assess the in catalytic performance compared with Y and ZSM-5 pellets in a fixed-bed reactor under the same operation conditions. The cracking of n–heptane over the pellets and structured catalysts for both ZSM–5 and Y zeolite showed very similar product selectivities for similar amounts of catalyst with apparent activation energy of around 60 kJ mol-1. This research demonstrates that structured catalysts can be manufactured with excellent zeolite adherence and when suitably activated/modified give comparable cracking results to the pelleted powder forms. These structured catalysts will improve temperature distribution in highly exothermic and endothermic catalysed processes.
|
2 |
High pressure adsorption of hydrogen sulfide and regeneration ability of ultra-stable Y zeolite for natural gas sweeteningRahmani, M., Mokhtarani, B., Rahmanian, Nejat 02 March 2023 (has links)
Yes / Adsorbents are developing in the various separation industries; these adsorbents can use to sweeten natural gas and remove hydrogen sulfide. Many commercial adsorbents are not regenerable when exposed to hydrogen sulfide because hydrogen sulfide is highly reactive. For
removal, the main challenge when using surface adsorbent, is the dissociation adsorption of
and non-regenerability of adsorbent. In this study, ultra-stable Y (USY) zeolite, was chosen to adsorb hydrogen sulfide due to its unique physical and chemical properties. To accurately model the adsorption isotherms, experimental adsorption data were measured in high pressure up to 12 bar for hydrogen sulfide and 21 bar for carbon dioxide, methane, and nitrogen as other natural gas components. The experiments were performed at three temperatures of 283, 293 and 303 K. Toth model fitted the experimental data very well, and the capacity of hydrogen sulfide adsorption on USY at the temperature of 283 K and pressure of 12 bar is 4.47 mmol/g that is noticeable. By performing ten cycles of adsorption and regeneration of hydrogen sulfide on USY, the regenerability of the adsorbent was investigated and compared by conducting a similar test on commercial 13X adsorbent. USY is found to be completely regenerable when exposed to hydrogen sulfide. The Isosteric adsorption heat of hydrogen sulfide on the adsorbent is 18.1 kJ/mol, which indicates physical adsorption, and the order of adsorption capacity of tested compounds on USY is H2S > CO2≫CH4 > N2.
|
3 |
The use of synthesised USY as a dietary supplement for the removal of toxic metals (lead and cadmium) from simulated gastric juiceJaceni, Lydia Lucia January 2018 (has links)
Magister Scientiae (Medical Bioscience) - MSc(MBS) / The South African economy relies heavily on mining. The residues of these activities contain
harmful metals that are discharged into the environment as industrial wastes, contaminating
the air, soil, surface and ground water. A lot of people who live in remote areas in South Africa
rely on ground water to drink and cook. They also cultivate their own vegetables increasing the
risk of metal toxicity. Some of these metals are very toxic and can cause adverse effects upon
being ingested.
Toxic metals are well known to be harmful to humans. Some of these metals are carcinogenic
or nephrotoxic when a large amount is accumulated in the human body causing cancer and
destroying tissues such as the kidneys. The detrimental health effects of these metals may take
months to years before manifestation causing people to sideline them as hazards. One of the
major toxic elements that are discharged into the environment is lead.
A natural zeolite called clinoptilolite has been widely used as an adsorbent for toxic metals from
contaminated water and from the human body because of its properties such as ion-exchange
capacity and pore size. However, this natural zeolite clinoptilolite is not pure and may contain
traces of toxic elements of which the nature and concentration depend on the origin of
clinoptilolite. The structural stability of clinoptilolite in acidic or alkaline media is not well
documented. The lack of documented information about the leachates of clinoptilolite and
their long term effects on the human body may cause harm to people who ingest this zeolite.
This has led to investigation of synthetic zeolites such as faujasite which has already been used
for decontamination of sludge, industrial effluents and other waste water by removing toxic
metals such as Pb, Cd, Cu, Zn and As. This study focuses on comparing the toxic metal removal
efficiency of natural zeolite clinoptilolite (C), clinoptilolite-based faujasite (FAU3) and
clinoptilolite-based ultrastable Y zeolite (USY3), from contaminated water and simulated gastric
juice containing lead and cadmium and to evaluate the extent of leaching of other elements
from these zeolites.
Clinoptilolite was used as a starting material for the synthesis of faujasite (FAU3) which was
further treated with oxalic acid to get an ultrastable Y zeolite (USY3). Various techniques were
used to characterise the as-received clinoptilolite, faujasite zeolite and USY, namely XRD, SEMEDS,
FTIR, solid state NMR (27Al and 29Si) and BET-N2. These characterisation techniques
confirmed that clinoptilolite was successfully transformed into faujasite and that the treatment
of faujasite with oxalic acid yielded USY3. A comparative adsorption study was conducted using
three zeolite samples: namely Clinoptilolite (C), clinoptilolite-based faujasite (FAU3) and
ultrastable Y zeolite (USY3). ICP was used to characterise the liquid samples and it was
concluded that zeolites were efficient in removing lead and cadmium from contaminated water
samples as well as from simulated gastric juice. Some leachates from these zeolites were also
observed.
A contaminated water sample containing lead and cadmium was used as a medium where the
removal capacity and percentage removal with C, FAU3 and USY3 was investigated. It was
observed that the optimum dosage varied from one zeolite to the other and also from one
metal to the other. The optimum dosage for C, FAU3 and USY3 for the uptake of lead was found
to be 0.2 g, 0.2 g and 0.05 g respectively while for cadmium it was 0.4 g, 005 g and 0.1 g,
respectively. It was also shown in this study that the removal capacity for lead and cadmium
could be hindered by the Na content in FAU3 and USY3 due to the fact that these metals could
be in an uptake competition with Na and other cations that leached out or exchanged from the
zeolites. It was observed that the optimum metal concentration for lead uptake as well as for
cadmium with few metals being released back into the solution was 0.1 mg/L. The optimum
contact time for both lead and cadmium was 15 minutes. The factor that varied depending on
the type of metal was pH, which was at its optimum at 3.5 for lead and at 5.5 for cadmium.
A simulated gastric juice was contaminated with toxic metals (lead and cadmium) and the
zeolites were used to treat the contaminated samples. It was shown that the removal capacity
of these zeolites increased with the increase in initial concentration of the metal. Time proved
to be one factor that affected the behaviour of zeolites. The modification of the synthesised
faujasite into an ultrastable Y zeolite proved to have played a role in increasing the removal of
toxic metals and in preventing the high leaching of some elements out of the zeolite. / 2018-12-14
|
4 |
Diffusion Of Hydrocarbons In Zeolites And Ions In WaterBorah, Bhaskar J 08 1900 (has links) (PDF)
Diffusion is a fundamental process which occurs in a wide variety of phases. It plays an important role in chemistry, physics, biology, materials science etc. In recent times, diffusion in confined systems has been widely investigated. Porous aluminosilicates such as zeolites, carbon nano tubes and metal organic frameworks(MOF) provide confined regions within which small molecules can diffuse. Indeed, diffusion within these materials have attracted considerable attention in the past few decades (see for example, “Diffusion in Zeolites and Other Microporous Solids”, J. Ka¨rger and D..M. Ruthven, John Wiley &Sons, NewYork,1992). Diffusion in confined spaces exhibits rich variety. For example, single file diffusion, window effect, levitation effect (LE), super-and sub-diffusive motion have all been observed in confined regions.
Levitation effect provides an explanation for the dependence of self-diffusivity on the diameter of the diffusant. Consider a diffusant diffusing within a porous material. The pore network provided by the pore material may be characterized by the void and the neck distribution where the necks are the narrower regions interconnecting larger voids. It has been seen that diffusivity is maximum when the size of the diffusant is large and when it is comparable to the diameter of the bottleneck of the pore network. Recently it has been demonstrated that the levitation effect also exists in dense liquids such as water and dense solids. These developments essentially unify our understanding of diffusion in widely differing condensed matter phases. These results show that there is fundamentally no difference between porous substances and dense media at least with regard to dependence of self-diffusivity on the diameter of the diffusant.
Chapter 1 provides a brief introduction to the subject of hydrocarbons confined within zeolites and ionic conductivity in polar solvents. We have given a description of the different applications of zeolites in the area of catalysis, separation etc. Window effect, single file diffusion, levitation effect and enhancement of viscosity of confined fluids are described. A brief review of various computational studies of hydrocarbons confined within zeolites is given. This is followed by a discussion of different experimental techniques and their use in the study of diffusion and adsorption within zeolites by many different groups in the last few decades. In the last section of the chapter we have discussed the anomalous size dependence of ionic conductivity in polar solvents which presumably has its origin in the Levitation Effect(LE). We have explained different theories proposed previously to understand the non-monotonic behavior of ionic conductivity as a function of ionic radius.
A molecular dynamics(MD) investigation and quasi-elastic neutron scattering (QENS) study of pentane isomers in zeolite NaY is pre-sented in Chapter 2. QENS provides the first direct experimental evidence for LE. In an earlier study, a maximum in diffusivity as a function of the diameter of the diffusant for monatomic sorbates confined within zeolite NaY was observed by MD simulation. Since LE has been invoked to explain the diffusion in a wide variety of condensed matter phases, an experimental evidence of the levitation effect would be of great value. QENS measurements were carried out by Dr. Herve Jobic. Surprisingly we found that neopentane shows higher diffusivity than n-pentane and isopentane although its cross-sectional diameter perpendicular to the long molecular axis is larger compared to isopentane and n-pentane in agreement with predictions of LE. There is an excellent agreement between QENS results and MD simulation. LE predicts that the isomer with high diffusivity has low activation energy. The activation energies have been calculated from the Arrhenius plots using QENS as well as MD data. These follow the order Ea(n−pentane)>Ea(isopentane)>Ea(neopentane). Various other properties such as potential energy barrier at the bottleneck, velocity auto correlation function, intermediate scattering function, k dependence of the width of the dynamic structure factor have been computed. These provide additional insights into the nature of the motion of these isomers. They suggest that the barrier at the 12-ring window depends on the molecular diameter and levitation parameter of isomer.
In Chapter 3, we report molecular dynamics simulation study of n-hexane and 2,2-dimethylbutane(DMB) mixture confined within the pores of zeolite NaY. We have taken an equimolar composition of the mixture consisting of n-hexane and DMB. The total number of hydrocarbon molecules in the system is 128. The simulations were carried out at various temperatures of 170, 200, 250 and 300 K. We have computed the self-diffusivities from the slope of the mean square displacement. It is found that the diffusivity of DMB is 0.82 ×10−9 m2/sec and that of n-hexaneis0.38 ×10−9 m2/sec. All previous studies of linear hydrocarbon and its branched analogue in different zeolites in the literature suggest that it is the linear member which has higher self-diffusivity. The cross-sectional diameter of DMB perpendicular to the long molecular axis is higher than that of n-hexane. Thus, DMB should have lower diffusivity. In order to understand this behavior of diffusivity we have computed the activation energies from the Arrhenius plots. The activation energy of DMB is found to be lower than that of n-hexane. This is inconformity with the levitation effect which states that the molecule with larger diameter comparable to that of the bottleneck diameter has low activation energy. We have also computed the potential energyprofileatthe12-ring window. The potential energy profile shows a barrier for n-hexane and a minimum for DMB at the window. This is in agreement with the previous results on monatomic species. We have computed other properties such as velocity auto correlation function, intermediate scattering function as well as wave number dependence of full width at half maximum of dynamic structure factor. These properties explain in detail the motion of n-hexane and DMB within NaY zeolite.
In Chapter 4 molecular dynamics investigation into diffusion of n-decane and 3-methylpentane mixture within zeolite NaY. We have studied an equimolar mixture of n-decane and 3-methylpentane (36 of each) in the supercages of NaY zeolite in such a way that the con-centration is one molecule for every three cages. Simulations were performed at four different temperatures : 300, 350, 400 and 450 K. The distribution and orientation of the molecules inside the cage and at the window plane have been studied. Inside the cage, 3-methylpentane stays more close to the inner surface of the zeolite whereas n-decane prefers to stay close to the center of the cage. Both the species prefer to stay with their long molecular axis parallel to the surface of the zeolite. During passage through the window, 3-methylpentane is closer to the window center than n-decane. The distribution of the angle subtended by the end-to-end vector of the molecule with the normal to the window plane, while the molecular center is in the window plane, shows that 3-methylpentane samples a larger range of orientation than n-decane. This may lead to an entropic barrierfor n-decane. We have computed the diffusivity of both the molecules. Diffusivity of 3-methylpentane is found to be higher than n-decane. This behavior is consistent with the observations made in the last two chapters. The activation energy of 3-methylpentane is found to be 3.17 kJ/mol and forn-decaneitis6.0kJ/mol. This agrees with the prediction of levitation effect. The energy profile a the window shows shallow minimum for both n-decane and 3-methylpentane. Therefore, the energy profile does not describe the nature of motion of the molecules. We have computed the the dihedral angle distribution when the molecule is at the adsorption site and when it is at the window plane. The distributions essentially remain same for 3-methylpentane whereas a considerable change in the distributions is seen for n-decane. The gauche population of n-decane increases at the cost of trans population when it goes from the adsorption site to the window. The lower diffusivity of n-decane can be partly attributed to the change in the dihedral angle. Also, the orientational entropic barrier may be another cause of the slow motion of n-decane. Thus, in the present study the slow motion of n-decane is partly explained by levitation effect and partly by the change in the dihedral angle as well as the entropic barrier. Overall, the results in the last three chapters leads to the main conclusion that the branched isomer will diffuse faster than a linear hydrocarbon in zeolites with 12-ring window such as zeolite NaY.
In Chapter 5, diffusion of pentane isomers in zeolites NaX and NaY has been investigated using pulsed field gradient nuclear magnetic resonance(PFG-NMR) and molecular dynamics(MD) techniques respectively. Temperature as well as concentration dependence of diffusivity have been studied. The diffusivities obtained from NMR are roughly an order of magnitude smaller than those obtained from MD. The dependence of diffusivity on loading at high temperatures exhibits a type I behavior according to the classification of K¨arge rand Pfeifer. NMR diffusivities of the isomers exhibit the order D(n−pentane)>D(isopentane)>D(neopentane). The results from MD are in agreement with the QENS results where the diffusivities of the isomers follow the order D(n-pentane)<D(isopentane)<D(neopentane). The activation energies from NMR show Ea(n-pentane)<Ea(isopentane) <Ea(neopentane) whereas those from MD suggest the order Ea(n-pentane) >Ea(isopentane) >Ea(neopentane). The latter follows the predictions of levitation effect whereas those of NMR appears to be due to the presence of defects in the zeolite crystals. The differences between NMR and MD are attributed to the long time and length scales over which NMR samples are probed compared to MD or QENS. Th eresults from these studies suggests that although branched isomer intrinsically have higher diffusivities than linear hydrocarbons in zeolites such as NaY, the presence of defects can effectively annul this higher diffusivity of the branched isomer.
Correlation of self-diffusivity and entropy of monatomic sorbates con-fined within zeolite NaY has been investigated in Chapter 6. We have carried out molecular dynamics simulation on monatomic sor-bates within zeolite NaY at 150, 110 and 90 K. As suggested by the Levitation Effect, the self-diffusivity shows a non-monotonic behavior as a function of the diameter of the sorbates. We have computed the entropy of the sorbates of various sizes ranging from 3.07˚
A to 7.0˚
A using the method proposed by Goddard and his co-workers as well as from the radial distribution function. The variation of entropy with the diffusant diameter exhibits a behavior similar to that of the self-diffusivity on diffusant diameter, thereby showing a strong correlation between the entropy and diffusivity. The loss of entropy on adsorption is a minimum for the diffusant with maximum diffu-sivity. This is in agreement with the experimental measurements of Kemball. Thus, entropy follows the prediction of the levitation effect. With decrease in temperature both self-diffusivity as well as entropy show more pronounced maximum as a function of the diameter of the sorbate. The dimensionless diffusivity from three different isotherms follow a Rosenfeld type of excess entropy scaling rule, D∗= Aexp(αSe) where A and α are the scaling coefficients.
In Chapter 7 we have investigated the self-diffusivity as well as cor-rected diffusivity of pure methane in faujasite NaY combining quasi elastic neutron scattering experiment and molecular dynamics simu-lation. The QENS experiment carried out at 200 K led to an unex-pected dependence of self-diffusivity on loading for pure methane with the presence of a maximum at 32 CH4/unit cell. This is at variance with previous reports. Typically, diffusivity of a polar species such as methane in a zeolite such as NaY exhibits a monotonic decrease with loading. Molecular dynamics simulation was performed to reproduce this experimentally observed behavior. We could reproduce the diffusivity behavior qualitatively with a maximum at 16 CH4/unit cell. The corrected diffusivities obtained from both experiment as well simulation show similar behavior as the self-diffusivity with maximum at an intermediate loading. The experimental behavior was reproduced only when the interaction of methane with the sodium cation is in-creased suggesting that this interaction may be important.
In Chapter8 we have investigated the role of attractive interaction on size dependent diffusivity maximum of ions in water. We have per-formed molecular dynamics simulation of mode lions in water. Earlier study of systems interacting only through van der Waals interaction shows that the size dependent diffusivity maximum or the levitation effect disappears when the attractive term(r−6 term) of the Lennard-Jones potential is put equal to zero. It is not clear whether the absence of the dispersion interaction in a system where there is electrostatic attraction will lead to a size dependent diffusivity maximum. There-fore, two sets of simulations with and without dispersion interaction between the ion and water have been carried out at700Kinorderto understand the influence of the attractive interaction. It is found that the self-diffusivity of the ions indeed exhibits an anomalous maximum as a function of the vanderWaals diameter for both the sets, viz., with dispersion and without dispersion interaction. In fact, the diffusivity maximum is seen to be more pronounced when there is no dispersion interaction. This existence of the maximum in self diffusivity when there is no dispersion interaction between the ion and the water is attributed to the attractive term from electrostatic interactions. De-tailed analysis shows that the solvent shell is more well defined in the presence of dispersion interactions. The velocity auto correlation function shows undulation at short times for the smaller ions indicating rattling motion inside the cage formed by the surrounding water molecules. Smaller ion exhibits a bi-exponential decay while a single exponential decay is seen for the ion with maximum diffusivity in the intermediate scattering function. The solvent structure appears to determine much of the dynamics of the ion. Interesting trends are seen in the activation energies and these can be understood in terms of the Levitation Effect.
|
5 |
Fractional Catalytic Pyrolysis Technology for the Production of Upgraded Bio-oil using FCC CatalystMante, Nii Ofei Daku 06 January 2012 (has links)
Catalytic pyrolysis technology is one of the thermochemical platforms used to produce high quality bio-oil and chemicals from biomass feedstocks. In the catalytic pyrolysis process, the biomass is rapidly heated under inert atmosphere in the presence of an acid catalyst or zeolite to promote deoxygenation and cracking of the primary vapors into hydrocarbons and small oxygenates. This dissertation examines the utilization of conventional fluid catalytic cracking (FCC) catalyst in the fractional catalytic pyrolysis of hybrid poplar wood. The influence of Y-zeolite content, steam treatment, addition of ZSM-5 additive, process conditions (temperature, weight hourly space velocity (WHSV) and vapor residence time) and recycling of the non-condensable gases (NCG) on the product distribution and the quality of the bio-oil were investigated.
The first part of the study demonstrates the influence of catalytic property of FCC catalyst on the product distribution and quality of the bio-oil. It was found that FCC catalyst with higher Y-zeolite content produces higher coke yield and lower organic liquid fraction (OLF). Conversely, FCC catalyst with lower Y-zeolite content results in lower coke yield and higher OLF. The results showed that higher Y-zeolite content extensively cracks dehydrated products from cellulose decomposition and demethoxylates phenolic compounds from lignin degradation. The Y-zeolite promoted both deoxygenation and coke forming reactions due to its high catalytic activity and large pore size. Higher Y-zeolite content increased the quality of the bio-oil with respect to higher heating value (HHV), pH, density, and viscosity. The steam treatment at 732 oC and 788 oC decreased the total BET surface area of the FCC catalyst. The findings suggest that steam treatment reduces the coking tendency of the FCC catalyst and enhances the yield of the OLF. Analysis of the bio-oils showed that the steamed FCC catalyst produces bio-oil with lower viscosity and density. Gas chromatography and 13C-NMR spectrometry suggest that steam treatment affect the catalyst selectivity in the formation of CO, CO2, H2, CH4, C2-C5 hydrocarbons and aromatic hydrocarbons. The addition of ZSM-5 additive to the FCC catalyst was found to alter the characteristic/functionality of the catalytic medium. The product slate showed decrease in coke yield and increase in OLF with increase in ZSM-5 additive. The FCC/ZSM-5 additive hybrid catalysts produced bio-oils with relatively lower viscosity and higher pH value. The formation of CO2, CH4, and H2 decreased whilst C5 and aromatic hydrocarbons increased with increase in ZSM-5 additive level.
The second part of the work assesses the effect of operating conditions on the catalytic pyrolysis process. The response surface methodology study showed reaction temperature to be the most influential statistically significant independent variable on char/coke yield, concentration of non-condensable gases, carbon content, oxygen content, pH and viscosity of the bio-oils. The WHSV was the most important statistically significant independent variable that affects the yield of organic liquid and water. Adequate and statistically significant models were generated for the prediction of the responses with the exception of viscosity. Recycling of the NCG in the process was found to potentially increase the liquid yield and decrease char/coke yield. The experiments with the model fluidizing gases showed that CO/N2, CO2/N2, CO/CO2/N2 and H2/N2 increase the liquid yield and CO2/N2 decrease char/coke yield. The results showed that recycling of NCG increases the higher heating value and the pH of the bio-oil as well as decreases the viscosity and density. The concept of recycling the NCG in the catalytic cracking of biomass vapors with FCC catalyst improved the overall process. The evaluation of the reactivity of conventional FCC catalyst towards bio-based molecules provide essential direction for FCC catalyst formulation and design for the production of high quality bio-oils from catalytic pyrolysis of biomass. / Ph. D.
|
Page generated in 0.0374 seconds