The thesis is related to investigate characteristics and performance of a Z-source full bridge dc/dc converter which boosts the input voltage to a higher output voltage. Zsource structure increases the reliability of the converter according to current fed full bridge dc/dc converter and also reducing the complexity according to two stage design approach (boost followed by full bridge). Operating principles of the Z-source dc-dc converter is described by current and voltage waveforms of the components and mathematical expressions. Moreover, small signal models and transfer functions are derived for both continuous current mode (CCM) and discontinuous current mode (DCM) operations of the converter. Waveforms obtained, mathematical expressions, small signal models and transfer functions derived are confirmed by simulations. Performance of the converter and controller are both tested in laboratory prototype.

In this work, the operating modes and characteristics of a Z-source full-bridge dc/dc converter are investigated. The mathematical analysis of the converter in continuous conduction mode, CCM and discontinuous conduction mode-2, DCM-2 operations is conducted. The transfer functions are derived for CCM and DCM-2 operation and validated by the simulation. The current mode controller of the converter is designed and its performance is checked in the simulation. The component waveforms in CCM and DCM-2 modes of operation are verified by operating the prototype converter in open-loop mode. The designed controller performance is tested with the closed-loop control implementation of the prototype converter. The theoretical efficiency analysis of the converter is made and compared with the measured efficiency of converter.