Durant ces dernières années, l'intérêt pour les technologies des véhicules à faibles émissions de carbone a fait un bond important à travers l'Union européenne (UE) et au-delà, encouragé en cela par les gouvernements et les constructeurs automobiles. De grands espoirs ont été mis plus récemment dans les véhicules électriques (VE) et les véhicules électriques hybrides (VEH) en tant que technologies clés pour atténuer le changement climatique, améliorer la sécurité énergétique et favoriser une nouvelle branche de l'industrie dans le secteur automobile. Ainsi, l'électrification des transports a été considérée comme une stratégie clé pour réduire les émissions de CO2 dans le secteur des transports. Le principal défi est d’augmenter l’autonomie des véhicules (ce qui a toujours été au coeur de la concurrence des industries du transport), ainsi que la durée de vie des volumineuses et coûteuses batteries. Par conséquent, ceci indique que le rendement du convertisseur de puissance est un des points clés à développer pour les générations des véhicules électriques à venir. L’autre paramètre influant est la qualité de la tension et du courant (en particulier la suppression des harmoniques basses fréquences) qui permet de réduire la taille des filtres d'entrée et de sortie de ces convertisseurs. L'objectif de cette thèse est de parvenir à un meilleur rendement en proposant de nouvelles structures de convertisseur de puissance et des commandes vectorielles modifiées ; le choix de deux onduleurs alimentant un moteur ouvert aux deux extrémités. Après l'analyse étape par étape, modèle théorique, simulation et enfin une mise en oeuvre expérimentale, il a été constaté que les nouvelles méthodes proposées sont compétitives et peuvent s’appliquer aux cas des VEH et des VE afin d’apporter des caractéristiques supérieures en termes d’efficacité et de qualité de tension et de courant. / Over the last decade, the interest for low-carbon vehicle technologies has surged among both governments and automotive manufacturers across and beyond the European Union (EU). Great hopes have been put, first, on biofuel vehicles and more recently on electric vehicles (EVs) and hybrid electric vehicles (HEVs) as key technologies to mitigate climate change, enhance energy security and nurture new industry branches within the automotive sector. So electrification of vehicles has been seen as a key strategy to reduce CO2 emissions from the transport sector. The main challenge toward EVs and HEVs is to keep driving for longer distance (which has been always fields for competition among traction industries) as well as lifetime battery cells as storage system. As a result, these indicate importance of power converter efficiency as a key gate for next generations of these up-coming vehicles. The next parameter is the quality of output voltage/current (especially by suppressing low-order harmonics) to reduce the size of filtering. The aim of this thesis is to achieve better efficiency and output voltage/current Total Harmonic Distortion (THD) by proposing novel power converter and associated Pulse Width Modulation (PWM) methods while imposing modification on power converter topology. As a result, dual-inverter is proposed to supply open-end motor from both sides. To this aim, three PWM methods are suggested as: The first one, Modified Space Vector Modulation (MSVM) for dual-inverter supplied by single dc source, improves efficiency by 4-5% (while having lower switching losses), and reduces Common Mode Voltage (CMV) levels by 66%, as well. The voltage/current harmonics are analytically analyzed which shows mainly better performance. Effective switching frequency is also reduced by 66% due to the reduction of number of commutations. In the second one, Near State PWM (NSPWM) is adapted for dual-inverter supplied by single dc source in order to eliminate triplen harmonics (therefore Zero Sequence Voltage, ZSV) and improve efficiency (by 3-4%) compared to Space Vector Modulation (SVM). Additionally due to avoiding use of zero vectors, CMV is improved by 66%. While having 8 commutations instead of 12 in SVM, effective switching frequency is improved by 33%. And finally, the third proposed method deals with NSPWM for dual-inverter supplied by two isolated dc sources wherein efficiency and CMV levels show the same performance as previous one. However, in this method, voltage THD is highly reduced compared to SVM. Triplen harmonics of the output voltage are inherently suppressed by the structure. These 3 proposed methods are analytically studied and their performances are step by step simulated in Matlab/Simulink environment. Then the methods are implemented in dualinverter fed open-end motor in laboratory setup; and the results are compared with these of SVM. Finally, it is found that novel proposed methods are so competitive solutions to be applied in HEVs and EVs and bring superior efficiency and voltage/current harmonic features.

This master´s thesis deals with the indication and localization of earth faults in overhead lines. Earth fault is the most frequently occurring type of fault in medium voltage overhead lines – it covers approx. 95% of all faults and is very difficult to indicate and localize them correctly and in time with currently available methods on the market. Therefore is very important to study earth fault and its indication, localization. The thesis consists of a theoretical and a practical part. The theoretical part deals with faults in overhead networks with different type of neutral grounding, mainly with one phase to the ground fault in the compensated, ungrounded, solidly grounded and via resistance grounded networks. Most of the theoretical part is dedicated to one phase to the ground fault in the compensated and ungrounded networks, where this type fault is called the earth fault. In the compensated and ungrounded networks is described in details behavior – voltage and current relations during both steady state and transient state earth fault. The theoretical part is further dedicated to detection methods of earth faults and their preconditions for use. There is described also in details the complete procedure of earth fault detection, which includes indication, unhealthy feeder determination and exact position or line section localization. End of the theoretical part is then focused on determination of accuracy requirements for measurement of basic quantities and computation of other parameters. The practical part deals with a work at medium distribution network model, which includes familiarization with the model, detailed verification of its functionality and behavior during the earth fault, obtaining faults records and algorithmization of methods: method of qu – diagram and method of first half - period, which are able to detect unhealthy feeder. This part of the thesis was put together based on a demand of company Mega, corp., which wanted to verify function of both above mentioned and by them not yet tested methods.