The aim of this thesis was to investigate the penetration features of the hydrofobized hyaluronic acid – based polymeric micelles using Nile red as carried tracer. Furthermore, to implement basic characterization of polymeric micelles for potential cosmetic applications using Coenzyme Q10 (CoQ10) as carried substance. It was found that the size of the polymeric micelles with carried CoQ10 did not exceed 100 nm. Applied delivery systems based on hydrophobic hyaluronic acid were suitable for potential topical application. Delivery systems with Nile Red as carried tracer demonstrated excellent penetration features. We assume that delivery systems with CoQ10 will exhibit similar penetration features. An issue has appeared whether the carrier breaks or proceeds along with NR to the skin. Moreover, another experiments have been designed which could also verify the penetration features of these systems.

Determinações de tensão superficial (γ) na interface ar-água e espessuras médias elipsométricas in situ (d), foram usadas para estudar as interações entre dispersões de lípides (em forma de bicamadas) e filmes de poliestireno sulfato produzidos por revestimento rotacional sobre placas de óxido de silício. A adição de NaCl para uma concentração final de 50 mM em uma dispersão de 0.2 mM de lípide catiônico sintético produziu instantaneamente uma camada de 6 nm de espessura que permaneceu estável com o tempo, indicando uma cinética de adsorção muito rápida, determinada possivelmente, pela atração hidrofóbica entre defeitos sobre a bicamada, induzidos pelo sal, e a superfície do filme. Contudo, em água a adsorção de DODAB cresceu monotonicamente alcançando no máximo uma espessura de 1.6-1.8 nm (após 15 horas de interação) em função do tempo, a qual não foi consistente com deposição de bicamada. Nos estágios iniciais em água pura, a adsorção do anfifílico aumentou linearmente com a raiz quadrada do tempo, mostrando um processo controlado por difusão de vesículas, com coeficiente de difusão(D), aproximadamente igual a 1.0 x 10-11 m22s-1 em boa aproximação com valores determinados para vesículas de outros lípides por outros autores. Medidas elipsométricas sob o ar (ex- situ) de adsorção de DODAB, DHP e PC foram difíceis de realizar devido ao aumento da espessura média do filme polimérico durante o ciclo de lavagem e secagem. Na faixa de concentração de 0.1- 1.0 mM o filme adsorvido de DODAB em ar foi mais hidrofóbico (ângulo de contato de avanço ΘA= 84° ± 3°) do que aquele para o filme puro de polímero (ΘA=71 ° ± 4°). Nenhum efeito do filme de DHP sobre a molhabilidade do filme de PSA foi observado, apenas um aumento de rugosidade revelado pela mudança em ΔΘ de 2° para 11° (tabela 3). Filmes planos de PSA são hidrofóbicos(ΘA= 86° ± 5°). Após interação com PC, as superfícies tornam-se menos hidrofóbicas (ΘA= 75° ± 3°). A tensão superficial em ar-água para uma dispersão lipídica em água pura diminuiu rapidamente sob adição de sal (7-50 mM de NaCl), sugerindo a ocorrência de fusão de vesículas, induzida por sal, com a interface ar-água.O estudo da interação entre sais de DODA e partículas poliméricas por medidas de tamanho e potencial-zeta das partículas permitiu observar deposição de bicamadas optimizada por adição de sal a baixas concentrações (0.05-5.0 mM NaCl). / Determinations of surface tension (γ) at the air--water interface, contact angles (Θ), and in and ex-situ ellipsometric mean thickness (d) were used to study the interaction between dioctadecyldimethylammonium bromide (DODAB) small vesicles and spin-coated polystyrene sulfate (PSS) films on silicon wafers. Upon the adition of NaCl (50 mM final concentration) to a 0.2 mM DODAB dispersion, adsorption from vesicles on PSS films immediatly yielded a DODAB layer 6.0 nm thick which remained stable as a function of time. However, in water, in situ DODAB adsorption monotonically increased reaching at most 1.6--1.8 nm as a function of time (from 15 mm of interaction), which were not values consistent with bilayer deposition. At early stages in pure water, DODAB adsorption linearly increased with the square root of time, indicating a vesicle difision controlled process with ca. 1.0 x 10-11 m2s-1 as the vesicle diffusion coeficient (D) in nice agreement with reported D for similar vesicles. In contrast, adding 50 mM salt, resulted in a very fast adsorption kinetics determined by the hydrophobic atraction between salt-induced defects on lhe bilayer and the film surface. Ex situ measurements of DODAB, DHP e PC adsorption were difficult because wetting/drying cycles of the polimeric fiIms increased its mean thickness. From 0.1 up to 1.0 mM DODAB, the adsorbed film in air was more hydrophobic (advancing contact angle, ΘA = 84 ± 3°) than the bare PSS film (ΘA = 71 ± 4°). No effect of DHP film on the wettability of PSA film could be observed, just a increase of rougness revealed by the change of ΔΘ from2° to 11°( table 3). Pure PSA films are hydrophobic, as revealed by the mean advancing angle ΘA = 86 ± 5°. After interaction with PC, the surfaces turn less hydrophobic with a mean ΘA = 75 ± 3°. Air-water surface tension for a DODAB dispersion in pure water rapidly decreased upon salt addition (7-50 mM NaCI), suggesting salt-induced vesicle fusion wilh the air--water interface occurred, in nice agreement with saIt-induced vesicle fusion at the hydrophobic polymer-water surface.The investigation of the interaction between DODA salts and polymeric particles from diameter and zeta- potential measurements, allowed us to detect bilayer deposition optimized by salt adition in low concentration(0.05-5.0 mM NaCl).

Determinações de tensão superficial (γ) na interface ar-água e espessuras médias elipsométricas in situ (d), foram usadas para estudar as interações entre dispersões de lípides (em forma de bicamadas) e filmes de poliestireno sulfato produzidos por revestimento rotacional sobre placas de óxido de silício. A adição de NaCl para uma concentração final de 50 mM em uma dispersão de 0.2 mM de lípide catiônico sintético produziu instantaneamente uma camada de 6 nm de espessura que permaneceu estável com o tempo, indicando uma cinética de adsorção muito rápida, determinada possivelmente, pela atração hidrofóbica entre defeitos sobre a bicamada, induzidos pelo sal, e a superfície do filme. Contudo, em água a adsorção de DODAB cresceu monotonicamente alcançando no máximo uma espessura de 1.6-1.8 nm (após 15 horas de interação) em função do tempo, a qual não foi consistente com deposição de bicamada. Nos estágios iniciais em água pura, a adsorção do anfifílico aumentou linearmente com a raiz quadrada do tempo, mostrando um processo controlado por difusão de vesículas, com coeficiente de difusão(D), aproximadamente igual a 1.0 x 10-11 m22s-1 em boa aproximação com valores determinados para vesículas de outros lípides por outros autores. Medidas elipsométricas sob o ar (ex- situ) de adsorção de DODAB, DHP e PC foram difíceis de realizar devido ao aumento da espessura média do filme polimérico durante o ciclo de lavagem e secagem. Na faixa de concentração de 0.1- 1.0 mM o filme adsorvido de DODAB em ar foi mais hidrofóbico (ângulo de contato de avanço ΘA= 84° ± 3°) do que aquele para o filme puro de polímero (ΘA=71 ° ± 4°). Nenhum efeito do filme de DHP sobre a molhabilidade do filme de PSA foi observado, apenas um aumento de rugosidade revelado pela mudança em ΔΘ de 2° para 11° (tabela 3). Filmes planos de PSA são hidrofóbicos(ΘA= 86° ± 5°). Após interação com PC, as superfícies tornam-se menos hidrofóbicas (ΘA= 75° ± 3°). A tensão superficial em ar-água para uma dispersão lipídica em água pura diminuiu rapidamente sob adição de sal (7-50 mM de NaCl), sugerindo a ocorrência de fusão de vesículas, induzida por sal, com a interface ar-água.O estudo da interação entre sais de DODA e partículas poliméricas por medidas de tamanho e potencial-zeta das partículas permitiu observar deposição de bicamadas optimizada por adição de sal a baixas concentrações (0.05-5.0 mM NaCl). / Determinations of surface tension (γ) at the air--water interface, contact angles (Θ), and in and ex-situ ellipsometric mean thickness (d) were used to study the interaction between dioctadecyldimethylammonium bromide (DODAB) small vesicles and spin-coated polystyrene sulfate (PSS) films on silicon wafers. Upon the adition of NaCl (50 mM final concentration) to a 0.2 mM DODAB dispersion, adsorption from vesicles on PSS films immediatly yielded a DODAB layer 6.0 nm thick which remained stable as a function of time. However, in water, in situ DODAB adsorption monotonically increased reaching at most 1.6--1.8 nm as a function of time (from 15 mm of interaction), which were not values consistent with bilayer deposition. At early stages in pure water, DODAB adsorption linearly increased with the square root of time, indicating a vesicle difision controlled process with ca. 1.0 x 10-11 m2s-1 as the vesicle diffusion coeficient (D) in nice agreement with reported D for similar vesicles. In contrast, adding 50 mM salt, resulted in a very fast adsorption kinetics determined by the hydrophobic atraction between salt-induced defects on lhe bilayer and the film surface. Ex situ measurements of DODAB, DHP e PC adsorption were difficult because wetting/drying cycles of the polimeric fiIms increased its mean thickness. From 0.1 up to 1.0 mM DODAB, the adsorbed film in air was more hydrophobic (advancing contact angle, ΘA = 84 ± 3°) than the bare PSS film (ΘA = 71 ± 4°). No effect of DHP film on the wettability of PSA film could be observed, just a increase of rougness revealed by the change of ΔΘ from2° to 11°( table 3). Pure PSA films are hydrophobic, as revealed by the mean advancing angle ΘA = 86 ± 5°. After interaction with PC, the surfaces turn less hydrophobic with a mean ΘA = 75 ± 3°. Air-water surface tension for a DODAB dispersion in pure water rapidly decreased upon salt addition (7-50 mM NaCI), suggesting salt-induced vesicle fusion wilh the air--water interface occurred, in nice agreement with saIt-induced vesicle fusion at the hydrophobic polymer-water surface.The investigation of the interaction between DODA salts and polymeric particles from diameter and zeta- potential measurements, allowed us to detect bilayer deposition optimized by salt adition in low concentration(0.05-5.0 mM NaCl).

CHARLES UNIVERSITY FACULTY OF PHARMACY IN HRADEC KRÁLOVÉ DEPARTMENT OF PHARMACEUTICAL TECHNOLOGY Author: Tereza Pokorná Title of Diploma thesis Terbinafine-loaded biodegradable polymeric systems for topical administration Supervisor: PharmDr. Eva Šnejdrová, Ph.D. In the diploma thesis the released properties of solid dispersions with terbinafine, based on polyesters of D,L-lactic acid and glycol acid, branched with pentaerythritol and tripentaerythritol are studied. The theoretical part deals with solid dispersions, their classification and methods of preparation, methods of drug dissolution testing, properties, effect, use of terbinafine and preparations containing terbinafine. In the experimental part, solid dispersions were prepared by the melting method. The drug was incorporated into the polyester in the form of a hydrochloride or a base in a concentration of 10 % or 20 %. Some systems were plasticized with 30% triethyl citrate. Thin layers were formulated from solid dispersions, and drug dissolution tests were performed on phosphate buffer pH 7.4 at 37 řC. Assay of terbinafine released was performed spectrophotometrically at 223 nm and ultra-high performance liquid chromatography. Based on the results of this diploma thesis, it can be clearly stated that the suitable carrier of terbinafine...

CHARLES UNIVERSITY FACULTY OF PHARMACY IN HRADEC KRÁLOVÉ DEPARTMENT OF PHARMACEUTICAL TECHNOLOGY Author: Vlastimil Barák Title of Diploma thesis The influence of formulation factors on the characteristics of terbinafine loaded nanoparticles Supervisor: PharmDr. Eva Šnejdrová, Ph.D. Consultant: Mgr. Juraj Martiška The diploma thesis is focused on biodegradable polymer nanoparticles loaded by terbinafine based on the copolymer of glycolic and lactic acid branched on polyacrylic acid. The nanoprecipitation method was employed, and the influence of formulation factors on nanoparticle characteristics was studied. The following formulation factors were the concentration of the polymer, the amount of terbinafine, and the concentration of surfactant. Nanoparticles of 120 nm to 300 nm were obtained depending on the preparation conditions. The nanoparticle polydispersity was in all cases from 0.080 to 0.230. The prepared nanoparticles were stable, as evidenced by zeta potential values above 38 mV. A positive zeta potential is desirable for dermal and mucosal adhesion in the topical and ocular application of nanoparticles with terbinafine. The amount of polymer used to form nanoparticles has the greatest effect on particle size. With increasing polyester concentration in the internal phase, the size of the...