The essence of this diploma thesis is the design and implementation of software for laser ablation control. The paper describes laser ablation, hardware specifications of device and application requirements. The second part provides description of design and implementation of the actual application in NI LabView.

No description available.

Nursing care continuing the treatment of cardiac arrhythmias is an inseparable part of the patient?s care. As there are various types of arrhythmias and different types of treatment, similarly, the subsequent nursing care has its specifics as well. It relates not only to the post-treatment care but also to pre-surgery preparation and subsequent education. The theoretical part of the thesis contains the information on arrhythmias, their development and treatment. Organizations associating nurses working in arrhythmologic centres are mentioned as well. The practical part consists of the survey research. The quantitative enquiry is conducted in arrhythmologic centres by means of questionnaires addressing the nurses. The qualitative part contains interviews with patients who underwent some of the types of cardiac arrhythmia treatment. The objective of the thesis was to find out whether the nurses are aware of the specifics of the nursing care that follows the treatment of cardiac arrhythmia, in which stage the treatment is the most demanding for nurses and whether they can apply standardized nursing procedures in their work. Another objective is focused on mapping of the educative activity within the nursing care. Interviews with the patients are aimed at the areas of admission, prior to surgery, after surgery and during education. They should outline the view from ?the other side?. All the defined hypotheses were confirmed. The cardinal hypothesis of the thesis was the assumption that nurses, when providing nursing care to patients undergoing treatment of cardiac arrhythmias, do not work according to standardized nursing procedures. Subsequently, a draft of standardized nursing procedure focused on nursing care of patients undergoing implantation of a permanent cardiostimulator was prepared ? it could be applied in the University Hospital in Plzeň where most of the enquiry was conducted.

Catheter ablation is a unique method for cardiac arrhythmias treatment based on creating spot lesions of radiofrequency energy using intracardiac ablation catheter. Transmurality of these lesions should be achieved for long-term therapeutic treatment effect. The degree of myocardial damage depth is reflected in the parameters of sensed intracardiac ECG. From research studies is evident that the change in morphology and deflection of ablation signal play a key role in the assessment of transmurality. This thesis consists of theoretical introduction to electrophysiology, proposal and realization of methods for objective assessment of transmurality by processing signals in time, frequency and time – frequency domain. The end of this diploma thesis includes the statistical analysis of these clinical dat and comparison of methods.

The thesis " Women after Mastectomy in the context of Social Work " deals with the topic of diagnosis of breast cancer, treatments and their side effects, itself, however focuses mainly on the psychological and social consequences that come along with such a serious illness. It aims to outline the possibilities that women with this diagnosis can use , and ultimately points out the great potential of social work within the health care system. Powered by TCPDF (www.tcpdf.org)

The present dissertation is motivated by the search for alternatives of lead-free soldering by nanoparticles of metals and their alloys. The research focuses on the possibility of replacing lead-free solders by nanoparticles. This issue is currently being addressed by the use of lead-free solders but their properties are not entirely equivalent to properties of lead-tin based alloys. The theoretical part of the dissertation first summarizes up-to date knowledge on the development of lead-free alloys currently used for soldering in the electronics. The work compares these lead-free solder candidates with previously used Pb-Sn alloys. The second section of the theoretical part is devoted to nanotechnology that offers possible solutions of problems associated with the use of lead-free solders. The text contains a description of the properties of nanocrystalline materials in comparison with those of compact alloys having the same chemical composition. The possibility of preparation of nanoparticles and potential problems associated with small particle sizes are also presented. Introduction of the experimental part focuses on the preparation of nanoparticles of pure metals and alloys by chemical and physical ways as well as on an instrumentation for characterisation and analysis. Attention is focused on the silver in nanoparticle form that exhibits the low temperature sintering effect, which is thermally activated by decomposition of oxide envelope covering the Ag nanoparticles. This factor is critical for low-temperature sintering and thus also for possible future applications. The thermal effects of the low sintering process were studied by methods of thermal analysis. The preparation of the Cu / Ag nano / Cu joints was carried out in-situ in inert atmosphere and under the action of atmospheric oxygen. In both cases varying conditions of thermal treatment were used. The cross sections of the prepared joints were then used for the metallographic analysis of the local mechanical properties of the resulting silver layer, for the chemical composition evaluation of the resulting layers of the joint, and for the microstructure study. Strength characteristics are represented by testing shear strength of individual joints.

Atrial fibrillation is the most prevalent arrhythmia worldwide and remains one of the major causes of morbidity and mortality. Atrial fibrillation is an arrhythmia that has a various etiology and takes number of clinical forms. Due to the heterogenity of atrial fibrillation, it is necessary to individualize the optimal treatment strategy, ie conservative pharmacological therapy or interventional therapy as catheter ablation. Inncorrect indication of catheter ablation of atrial fibrillation leads to low success rate of the procedure and increases the risk of the procedure. The success rate of catheter ablation of atrial fibrillation depends on many clinical parameters, including the size and volume of the left atrium and the presence of pathological tissue in the atrial myocardium. In everyday practice, echocardiography (2D-echocardiography) is the most dominant method in estimation of the left atrial parameters, for it's simplicity, non- invasiveness, financial costs and the absence of ionizing radiation. Different methods for assesment of left atrial parameters are cardiac CT, cardiac magnetic resonance imaging and methods of 3-D echocardiography or 3-D angiography. The results of the present studies show that in patients with non-valvular atrial fibrillation who are indicated for catheter...

Táto práca sa zaoberá prenosom analytických modelov medzi rôznymi systémami spektroskopie laserom indukovanej plazmy (LIBS) a porovnaním LIBS výsledkov získaných na rôznych systémoch. Instrumentácia LIBS aj spracovanie LIBS spektier sú vysoko flexibilné. Bohužiaľ, kvôli týmto flexibilitám sú výsledky získané na jednom LIBS systéme zriedka priamo porovnateľné s výsledkami získanými na inom systéme. Toto je ďalej komplikované rôznymi, často neznámymi, účinkami algoritmov spracovania LIBS spektier. V dôsledku toho sú modely analýzy spravidla špecifické pre systém (a parametre). Prenos analytických modelov medzi rôznými systémami by viedol k významnému zlepšeniu analytických schopností metódy LIBS a k miernemu zníženiu nákladov v priemyselných aplikáciách LIBS. Práca skúma vplyv rôznych stratégií merania metódou LIBS. Naďalej, práca skúma transformáciu získaných LIBS spektier prostredníctvom spracovávania údajov. Práca sa napokon zaoberá prenosom analytických modelov medzi rôznymi LIBS systémami.

The present dissertation consists of two thematically related parts. The first one (includes two publications) deals with the study of chemical pro- cesses and spectroscopy of highly reactive particles produced in the discharge plasma. This part includes the analysis of ro-vibronic CN radical transitions in the infrared region and the study of chemical reactions in pulsed dischar- ges. The discharge was used as a tool for research of decomposition of simple precursors (acetonitrile, formamide and BrCN) and the subsequent formation of intermediates and reaction products in plasma. The obtained experimental results were interpreted using a numerical model developed in context of this work and used to simulate the kinetics of the studied systems. The second part (includes seven works) is aimed at high-resolved spectro- scopy of metals in the ablation plasma. A total of six different metals were studied: Au, Ag, Cu, Cs, K and Na. The main motivation for spectroscopic research on metals in the infrared region is to obtain information on atomic metals transitions, which are particularly important for astronomical identi- fication of lines in the spectra of stars and their spectroscopic assignments. Each publication contains a summary of the analyzed atomic transitions of which a considerable portion had not...

This thesis deals with a general overview of laser-induced breakdown spectroscopy - ablation of material and plasma formation when a change of the surrounding environment occurs. The aim is to establish ideal conditions for improving detection, which is difficult for some elements when the measurement takes place in the ambient atmosphere. This is the reason why we change the ambient conditions, the gas (air, helium, argon) and its pressure. Buffer gases (helium, argon) influence the development of the material ablation and quality of generated plasma. That is why we inspect the changes in the signal according to particular atmospheres (signal change in buffer gases compared to the ambient atmosphere). The first part of the thesis presents the principle and physical nature of laser ablation with a brief search of experiments performed so far for similar purposes. Based on this search we determine conclusions about the influence of buffer gasses and pressure on the detection used gasses. In the second part of the work, the controlled experiment is presented, which consisted of the detection of spectral lines of fluorine and potassium, see chapter 5.6 and molecular transitions of calcium fluoride, see chapter 5.10. In a controlled experiment, we established two assumptions. The first assumption is the influence of the inert gas atmosphere, which should significantly improve the detection of fluorine and potassium compared to the air atmosphere. We confirmed this finding only for the argon atmosphere. In contrast, in the helium atmosphere, the detection of none of the elements improved. The second assumption is the effect of reducing the ambient pressure, which in combination with an inert gas should allow the detection of fluorine even at low concentrations in the sample. We consider the measured glass disk in chapter 5.7 to be such a sample. This assumption is not confirmed, as the increased intensity of the fluorine spectral line does not manifest itself in any way when the pressure in the vacuum chamber decreases. Finally, in chapter 7 from the results of individual parts of the experiment, the most suitable conditions for the future detection of the measured substances were proposed: fluorine, potassium and calcium fluoride molecules.