The purpose of the thesis The Place of Private Clinics in the Czech System of Health Service with an Accent on Marketing Strategy is to describe current situation of Czech Health Service and find out if there is a actual posibility of prosperous emplacement of private clinics. Due to intention of suggestion for the future of Health Service it is important to consider existing image of the Czech System.

There is a lack of precise and universally accepted approach in the quantification of carbon sequestered in aboveground woody biomass using remotely sensed data. Drafting of the Kyoto Protocol has made the subject of carbon sequestration more important, making the development of accurate and cost-effective remote sensing models a necessity. There has been much work done in estimating aboveground woody biomass from spectral data using the traditional multiple linear regression analysis approach and the Finnish k-nearest neighbor approach, but the accuracy of these methods to estimate biomass has not been compared. The purpose of this study is to compare the ability of these two methods in estimating above ground biomass (AGB) using spectral data derived from Landsat ETM+ imagery.

No description available.

Experimental observations indicate the presence of attached, gravity induced, horizontal buoyant currents above large area fires. Their driving mechanism is indirect and resembles the one observed above heated horizontal plates. Classic plume modelling is satisfactory for providing information for the flow far from the source. In dealing with large areas and directing attention to the flow close to the source, the classic plume theory should fail because the radial pressure gradient that is responsible for the driving of the flow is squeezed in the long and thin classic plume assumption. For this we propose a new plume structure for the description of the buoyant flow above a circular region of large radius L as “The flow field must be divided into three regions. A region where the flow is predominantly horizontal and attached to the surface, a transition region from horizontal to vertical where separation of the attached current takes place, and a region where vertical flow is established and classic plume theory can be applied”. A model for the description of the gross properties of the horizontal currents is developed under the term “horizontal plume”. The modified Richardson number for the horizontal plume a, being analogous to the radius of the large area, is studied asymptotically in the limit a → ∞ and second order uniformly valid semi-analytical solutions are obtained. The hot plate experiment was set up in order to test the model and facilitate its improvement. A chapter is dedicated to the data analysis coming from thermocouple readings and visualisation of the flow using particle image velocimetry.In the remainder of this thesis two classic problems of laminar natural convection are revisited. That of the first order laminar boundary layer above an isothermal circular plate of radius a and the first order laminar boundary layer above the semi- infinite plate inclined to horizontal. In both cases allowances to variable property effects were made through the introduction of a nondimensional parameter λT, with its value set to zero implying the assumption of the Boussinesq approximation. For the circular plate, fourth order series solutions were obtained valid at the edge of the plate where the effects of λT and Prandtl number Pr are studied. Furthermore a finite difference scheme for the numerical solution of the nonsimilar partial integro- differential equation was developed using the Keller Box method and compared with results obtained from the commercial finite element software COMSOL Multiphysics 3.5a. For the semi-infinite plate, fourth order series approximations valid at the edge of the plate were obtained, while an extensive analysis for the effect of λT, Pr and inclination parameter σ was performed on the flow. Positions of the separation points when the inclination is negative (σ < 0) as a function of Pr and λT were recovered.

The goal of quantifying the woody cover and biomass of tropical savannas, woodlands and forests using satellite data is becoming increasingly important, but limitations in current scientific understanding reduce the utility of the considerable quantity of satellite data currently being collected. The work contained in this thesis reduces this knowledgegap, using new field data and analysis methods to quantify changes using optical, radar and LiDAR data. The first paper shows that high-resolution optical data (Landsat & ASTER) can be used to track changes in woody vegetation in the Mbam Djerem National Park in Cameroon. The method correlates a satellite-derived vegetation index with field-measured canopy cover, and the paper concludes that forest encroached rapidly into savanna in the region from 1986-2006. Using the same study area, but with radar remote sensing data from 1996 and 2007 (ALOS PALSAR & JERS-1), the second paper shows that radar backscatter correlates well with field-measured aboveground biomass (AGB). This dataset confirms the woody encroachment within the park; however, in a larger area around the park, deforestation dominates. The AGB-radar relationships described above are expanded in the next paper to include field plots from Budongo Forest (Uganda), the Niassa Reserve (north Mozambique), and the Nhambita Community Project (central Mozambique). A consistent AGB-radar relationship is found in the combined dataset, with the RMSE for predicted AGB values for a site increasing by <30 %, compared with a site-specific equation, when using an AGB-radar equation derived from the three other sites. The study of the Nhambita site is extended in the following paper to assess the ability of radar to detect change over short time periods in this environment, as will be needed for REDD (Reducing Emissions from Deforestation and Degradation). Using radar mosaics from 2007 and 2009, areas known (from detailed ground data) to have been degraded decreased in AGB in the radar change detection, whereas areas of agroforestry and forest protection showed small increases.

In the last decade, advances in sensor and computing technology are revolutionary. The latest-generation of hyperspectral and synthetic aperture radar ((SAR) instruments have increased their spectral, spatial, and temporal resolution. Consequently, the data sets collected are increasing rapidly in size and frequency of acquisition. Remote sensing applications are requiring more computing resources for data analysis. High performance computing (HPC) infrastructure such as clusters, distributed networks, grids, clouds and specialized hardware components, have been used to disseminate large volumes of remote sensing data and to accelerate the computational speed in processing raw images and extracting information from remote sensing data. In previous research we have shown that we can improve computational efficiency of a hyperspectral image denoising algorithm by parallelizing the algorithm utilizing a distributed computing grid. In recent years, computational cloud technology is emerging, bringing more flexibility and simplicity for data processing. Hadoop MapReduce is a software framework for distributed commodity computing clusters, allowing parallel processing of massive datasets. In this project, we implement a software application to map forest aboveground biomass (AGB) with normalized difference vegetation indices (NDVI) using Landsat Thematic Mapper’s bands 4 and 5 (ND45). We present observations and experimental results on the performance and the algorithmic complexity of the implementation. There are three research questions answered in this thesis, as follows. 1) How do we implement remote sensing algorithms, such as forest AGB mapping, in a computer cloud environment? 2) What are the requirements to implement distributed processing of remote sensing images using the cloud programming model? 3) What is the performance increase for large area remote sensing image processing in a cloud environment? / Graduate / 0799 / 0984

Measurements of soil moisture are a crucial component for understanding the global water and carbon cycle, weather forecasting, climate models, drought prediction, and agriculture production. Active and passive microwave radar instruments are currently in use for remote sensing of soil moisture. Signals of Opportunity (SoOp) based remote sensing has recently emerged as a complementary method for soil moisture remote sensing. SoOp reuses general digital communication signals allowing the reuse of allocated wireless communication signal bands for science measurements. This thesis developed a tower based SoOp instrument implementing frequencies in the P-Band and S-Band. Two field campaigns were conducted using this new instrument during the summers of 2017 and 2018 at Purdue's Agronomy Center for Research and Education.

Parking and parks are both crucial to downtown economic development. Many studies have shown that downtown parks significantly contribute to increasing surrounding property values and attract residents, businesses and investment. Meanwhile, sufficient available parking promotes accessibility to downtown that also contributes to increasing tax revenue for local government. However, both downtown parks and parking raise problems. Many downtown parks have become places for drug dealing, shooting and vandalism since the decline of downtowns in the 1960s. At the same time, residents and visitors alike oftentimes complain about the lack of parking while in fact parking spaces occupy a large amount of land in downtown. Parks and parking also compete for space in downtown where land value is higher than the rest of the city. To address these issues, several cities have begun to address the relationship between parking and parks by placing them in one place: park on the ground level and parking underneath. This typology is defined as a park-above-parking project in this research. However, this phenomenon has received little scholarly attention. To justify the existing situation of park-above-parking and to contemplate future projects, this research provides a spatial-based investigation to discuss the empirical relationships between social cultural and political-economic impacts, design quality, and related policy-making processes based on four cases. A longitudinal study that traces the direct and indirect impacts of park-above-parking projects was conducted for each case through both qualitative and quantitative methods. This research provides a set of methods for the measurement of contributions of park-above-parking downtown, connections between park quality, social use and adjacent economic growth, recommendations for land use planning policy-making and guidelines for the design of park-above-parking projects.

This thesis focuses on the use of the semi-subterranean house on the coast of Norrbotten during the period 5000–2000 BC. The term semi-subterranean house (in Swedish boplatsvall) became a new category of prehistoric remains in Norrbotten during the 1980s. In 1984, the Swedish National Heritage Board (Riksantikvarieämbetet) started surveying the eastern part of Norrbotten, thus initiating a new interpretation of the history of Stone Age coastal societies. The aim of this study is to observe and analyse how the semi-subterranean house developed through time in eastern Norrbotten and to place this information into context. For this thesis, I have studied a number of 631 semi-subterranean remains on a number of sites dating from the Mesolithic era to the early Metal Age. A number of settlements belonging to different eras have been compared. Several archaeological investigations on sites from the late Mesolithic and the Neolithic periods have also provided important information. The thesis shows that throughout the Mesolithic period, the semi-subterranean house was usually less than 12 m2, with an average of approximately 9 m2 . Around 5000 BC, there appears to have been an increase in the number of this type of house being constructed. The number of known sites with semisubterranean houses is at its highest around the late Mesolithic period. Subsistence seems to have been based on the hunting of large terrestrial animals, such as elk and perhaps reindeer. Other animals found in the bone material are seal, beaver, salmon, perch, pike as well as some bird species. At the beginning of the Neolithic period, the number of sites with semi-subterranean houses decreases while the number of houses at each site increases. Also, the floor area increases to an average size of 15 m2 and the floor shape changes from circular to rectangular. The bone material consists at this time of seal bones, while elk and reindeer remains are scarce. Most of the sites are concentrated in the area around the mouths of the Kalix and Torne Rivers. At the middle and end of the Neolithic period, the numbers of sites increase as do the number of houses on each site and the size of the fl oor areas. The average floor area is 28 m2. The bone material now contains no elk or reindeer remains, while seal and various fi sh species are common. Around 2300 BC, the number of semi-subterranean houses decreases dramatically. The semi-subterranean house was probably exchanged for another sort of dwelling more suited to the needs of society. After 2300 BC, there is a total decline in known sites in the area. This could be explained by a reorganisation of the settlements as a result of greater interaction with the south Scandinavian battle-axe culture, together with higher interaction and cultural identification with neighbouring groups in the north and around the Bothnian Bay on the Finnish side.

Above-surface interaction is a new and exciting topic in the field of human-computer interaction (HCI). It focuses on the design and evaluation of systems that humans can operate by moving their hands in the space above or in front of interactive displays. While many technologies emerge that make such systems possible, much research is still needed to make this interaction as natural and effortless as possible. First this thesis presents a set of guidelines for designing above-surface interactions, a collection of widgets that were designed based on these guidelines, and a system that can approximate the height of hands above a diffused surface illumination (DSI) device without any additional sensors. Then the thesis focuses on interaction techniques for activating graphical widgets located in this above-surface space. Finally, it presents a pair of studies that were conducted to investigate item selection in the space above a multitouch surface. The first study was conducted to elicit a set of gestures for above-table widget activation from a group of users. Several gestures were proposed by the designers to be compared with the user-generated gestures. The follow-up study was conducted to evaluate and compare these gestures based on their performance. The findings of these studies showed that there was no clear agreement on what gestures should be used to select objects in mid-air, and that performance was better when using gestures that were chosen less frequently, but predicted to be better by the designers, as opposed to those most frequently suggested by participants.