<p>Electro-acoustic devices such as surface acoustic wave (SAW) and bulk acoustic wave (BAW) devices have been in commercial use for over 60 years and can be found in applications ranging from specialised scientific and military equipment to consumer products, such as mobile telephones, TV and radio receivers, etc. Today by far the largest market for electro-acoustic devices is the telecommunication industry which annually consumes approximately three billion acoustic wave filters for frequency control alone.</p><p>The development of new materials and technologies for electro-acoustic devices has gained a substantial and growing interest from both academic and industrial research communities in recent years due to the enormous growth in the telecommunication industry and other forms of wireless data communication. One of the bigger issues has been to replace the single crystalline substrates with thin film piezoelectric materials deposited by reactive sputtering. This would not only reduce the manufacturing costs but will also enable high frequency of operation and a wider choice of substrate materials. However, in order to obtain the material properties required for the intended application a detailed theoretical description of the reactive sputtering process is necessary since the texture and other functional properties of the piezoelectric material are extremely sensitive to the process parameters in addition to the structure of the underlying material.</p><p>This thesis studies the reactive sputtering process and its application for the fabrication of thin film electro-acoustic devices. The aim has been to gain a further insight into the process and make use of this knowledge to improve the fabrication of electro-acoustic devices. In this work modelling of the reactive sputtering process has been improved by studying certain fundamental aspects of the process and in particular the dynamics of the processes taking place during sputtering both at the target and the substrate surfaces. Consequently, highly textured thin piezoelectric aluminium nitride films have been synthesized and thin film bulk acoustic resonators (FBAR) operating in the GHz range have been fabricated and studied.</p>

Electro-acoustic devices such as surface acoustic wave (SAW) and bulk acoustic wave (BAW) devices have been in commercial use for over 60 years and can be found in applications ranging from specialised scientific and military equipment to consumer products, such as mobile telephones, TV and radio receivers, etc. Today by far the largest market for electro-acoustic devices is the telecommunication industry which annually consumes approximately three billion acoustic wave filters for frequency control alone. The development of new materials and technologies for electro-acoustic devices has gained a substantial and growing interest from both academic and industrial research communities in recent years due to the enormous growth in the telecommunication industry and other forms of wireless data communication. One of the bigger issues has been to replace the single crystalline substrates with thin film piezoelectric materials deposited by reactive sputtering. This would not only reduce the manufacturing costs but will also enable high frequency of operation and a wider choice of substrate materials. However, in order to obtain the material properties required for the intended application a detailed theoretical description of the reactive sputtering process is necessary since the texture and other functional properties of the piezoelectric material are extremely sensitive to the process parameters in addition to the structure of the underlying material. This thesis studies the reactive sputtering process and its application for the fabrication of thin film electro-acoustic devices. The aim has been to gain a further insight into the process and make use of this knowledge to improve the fabrication of electro-acoustic devices. In this work modelling of the reactive sputtering process has been improved by studying certain fundamental aspects of the process and in particular the dynamics of the processes taking place during sputtering both at the target and the substrate surfaces. Consequently, highly textured thin piezoelectric aluminium nitride films have been synthesized and thin film bulk acoustic resonators (FBAR) operating in the GHz range have been fabricated and studied.

The increased knowledge about the complexity of the physiological processes increases the demand on the analytical techniques employed to explore them. A comprehensive analysis of the entire sample content is today the most common approach to investigate the molecular interplay behind a physiological deviation. For this purpose a method that offers a number of important properties, such as speed and simplicity, high resolution and sensitivity, minimal sample volume requirements, cost efficiency and robustness, possibility of automation, high-throughput and wide application range of analysis is requested. Capillary electrophoresis (CE) coupled to mass spectrometry (MS) has a great potential and fulfils many of these criteria. However, further developments and improvements of these techniques and their combination are required to meet the challenges of complex biological samples. Protein analysis using CE is a challenging task due to protein adsorption to the negatively charged fused-silica capillary wall. This is especially emphasised with increased basicity and size of proteins and peptides. In this thesis, the adsorption problem was addressed by using an in-house developed physically adsorbed polyamine coating, named PolyE-323. The coating procedure is fast and simple that generates a coating stable over a wide pH range, 2-11. By coupling PolyE-323 modified capillaries to MS, either using electrospray ionisation (ESI) or matrix-assisted laser desorption/ionisation (MALDI), successful analysis of peptides, proteins and complex samples, such as protein digests and crude human body fluids were obtained. The possibilities of using CE-MALDI-MS/MS as a proteomic tool, combined with a proper sample preparation, are further demonstrated by applying high-abundant protein depletion in combination with a peptide derivatisation step or isoelectric focusing (IEF). These approaches were applied in profiling of the proteomes of human cerebrospinal fluid (CSF) and human follicular fluid (hFF), respectively. Finally, a multiplexed quantitative proteomic analysis was performed on a set of ventricular cerebrospinal fluid (vCSF) samples from a patient with traumatic brain injury (TBI) to follow relative changes in protein patterns during the recovery process. The results presented in this thesis confirm the potential of CE, in combination with MS, as a valuable choice in the analysis of complex biological samples and clinical applications.

Surface Acoustic Waves (SAW) fall under a special category of elastic waves that need a material medium to propagate. The energy of these waves is confined to a limited depth below the surface over which they propagate, and their amplitudes decay with increasing depth. As a consequence of their being a surface phenomenon, they are easily accessible for transduction. Due to this reason, a lot of research has been carried out in the area, which has resulted in two very popular applications of SAW - SAW devices and in Non-Destructive Testing and Evaluation. A major restriction of SAW devices is that the SAW need a piezoelectric medium for generation, propagation and reception. This thesis reports the attempt made to overcome this restriction and utilize the SAW on non-piezoelectric substrates for sensing capabilities. The velocity of the SAW is known to be dependent purely on the material properties, specifically the elastic constants and material density. This dependence is the motivation for the sensor system developed in the present work. Information on the survey of the methods suitable for the generation and reception of SAW on non-piezoelectric substrates has been included in the thesis. This is followed by the theoretical and practical details of the method chosen for the present work - the point source/point receiver method. Advantages of this method include a simple and inexpensive fabrication procedure, easy customizability and the absence of restrictions due to directivity of the SAW generated. The transducers consist of a conically shaped PZT element attached to a backing material. When the piezoelectric material on the transmitter side is electrically excited, they undergo mechanical oscillations. When coupled to the surface of a solid, the oscillations are transferred onto the solid, which then acts as a point source for SAW. At the receiver, placed at a distance from the source on the same side, the received mechanical oscillations are converted into an electrical signal as a consequence of the direct piezoelectric effect. The details of the fabrication and preliminary trials conducted on metallic as well as non-metallic samples are given. Various applications have been envisaged for this relatively simple sensor system. One of them is in the field of pressure sensing. Experiments have been carried out to employ the acoustoelastic property of a flexible diaphragm made of silicone rubber sheet to measure pressure. The diaphragm, when exposed to a pressure on one side, experiences a varying strain field on the surface. The velocity of SAW generated on the stressed surface varies in accordance with the applied stress, and the consequent strain field generated. To verify the acoustoelastic phenomenon in silicone rubber, SAW velocities have been measured in longitudinal and transverse directions with respect to that of the applied tensile strain. Similar measurements are carried out with a pressure variant inducing the strain. The non-invasive nature of this setup lends it to be used for in situ measurement of pressure. The second application is in the field of elastography. Traditional methods of diagnosis to detect the presence of sub-epidermal lesions, some tumors of the breast, liver and prostate, intensity of skin irritation etc have been mainly by palpation. The sensor system developed in this work enables to overcome the restrictive usage and occasional failure to detect minute abnormal symptoms. In vitro trials have been conducted on tissue phantoms made out of poly (vinyl alcohol) (PVA-C) samples of varying stiffnesses. The results obtained and a discussion on the same are presented.